University Of Jammu Tender

Internal wiring "Supply, installation, testing and commissioning of LT cubicle type totally enclosed free standing type, dust, damp and vermin proof Main Distribution Board complete with busbars, M.V. danger notice plate,space heater, power outlet, illumination lamp, Multifunction Meter indicating lamps, CT's, interconnections, with suitable capacity aluminium leads / solid aluminium strips / rods, connection of incoming and outgoing cables with thimbles, stove enameled painted and having following incoming and outgoing MCCBcomplete as required. MLTP PANEL INCOMER: 1nos. 400 A 4P microprocessor based MCCB of 36kA with Rotary Handle, shunt trip coil, adjustable O/L, S/C, E/F release. 1 nos. Digital type multifunction meter and indicators 2 Set of R,Y,B LED phase indicating lamp with MCB protection. 1 Set of ON,OFF & TRIP LED indicating lamp with MCB protection. BUSBARS: 630 Amp TPN (25kA for 1sec) aluminium busbar chamber of suitable length with aluminium busbars. All busbars and interconnections shall be of suitable size aluminium strips. Current density of aluminium shall not be more than 0.8 Amps/ sq.mm. OUTGOING I 6 no. 63A MCB TPN 10KA (HDB G1,2/F1,2) 1 no. SPD, 3phase OUTGOING II 2 nos. 200A 4P thermal magnetic based MCCB of 25kA adjustable. (DG/Mains) 1 nos. 400A 4P Manual Change Over ON load Switch 1nos. 400 Amp TPN (25kA for 1sec) aluminium busbar chamber of suitable length with aluminium busbars. All busbars and interconnections shall be of suitable size aluminium strips. Current density of aluminium shall not be more than 0.8 Amps/ sq.mm. 4 nos. 125A 4P thermal magnetic based MCCB of 25kA adjustable.(VTPNs) 1 no. 100A 4P thermal magnetic based MCCB of 25kA adjustable (UPS) 1 no. 63A MCB TPN 10KA (Lighting) Digital Multifunction Meters, with suitable rating Class-I CT's for outgoing feeders . For all out goings ON/OFF LED indicating lamp with MCB protection. BUSBAR All OUTGOINGS should have suitable bus links for mutiple terminations MLTP PANEL described above and specifications complete. The contractor will have to submit ISO certification and internal Drawings.  The Contractor will have to submit his test certificates i.e (HV test 1.5KV for 1 Minute , Megger Test) Manufacturers Test Certificate of Main Switchgears

Supply, laying of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, un armoured, served, sheathed 1100 volts grade.

240 sqmm 3 1/2 core