University Grants Commission Tender

Library Staff Station , Read Write Anti theft programming should be done in one single operation Read Write distance of Up to 25 cm and programming time of 1 second Should be fully ISO IEC 14443A15693 and ISO 18000 3 compliant The programming station should interface with the Library Management Software using NCIP V2.0 protocol Integrated with reader for patron ID Card based ISO IEC 14443A Mifare Plus to read for circulation. Staff station should have integrated card activation feature. Integrated with reader for patron ID Card based ISO IEC 14443AMifare Plus for personalization of data into the ISO IEC 14443A Mifare Plus passive contact less 1Kb smart card in the pre-defined location in the memory The details of memory location in smart card will be provided at appropriate time. NCIP V2.0 compliance software interface integrated with integrated library management software for all operations like patron card personalization, check-in. check-out, renew, reserve etc of library circulation Specifications Parameter Technical Operating Frequency 13.56 MHz Power Supply 5V to 12V Power Consumption 1.2W minimum Transmitting Power 1W minimum Read Range Up to 25 cm Antenna Internal Communication Interface USB RS232 Ethernet Supported Transponders ISO 15693, ISO 14443A and ISO 18000 3 Indicators LED Buzzer for power, read verification etc. Operating Temperature Minus 10 to Plus70 Degree Celcius Housing Material ABS Acrylonitrile Butadiene Styrene or Similar

RFID Handheld Portable Reader , The portable handheld reader and the required accessories must be a cordless, one piece design, to be held in one hand. The portable handheld reader must feature sound battery backup. The total weight of the portable handheld reader must be less than 1 Kg., including battery, RFID reader, antenna and computing unit, and any other components that must be carried by the user. The portable handheld reader must be easily set down on a library shelf or cart when necessary to free the users hands. The portable handheld reader must incorporate an ergonomic design, to aid user in reading shelves at all levels easy to use and be relatively non-stressful to wrist, arm, shoulder and elbow. The portable handheld reader battery life must allow the user to work for at least 4 hours before recharging. The portable handheld reader must use an anticollision algorithm that does not limit the number of tags, which can be simultaneously identified and read. The portable handheld reader must have the capacity to download at least 1 million items from librarys automation system onto the portable handheld reader memory medium. The proposed portable handheld reader must accommodate data collection simultaneously with other functions. The proposed system must accommodate Sorting, Shelving, and Searching, finding of library documents and pulling the defined data to help the user. The proposed portable handheld reader must have an audible tone and visible indicators to verify item has been identified. The handheld reader should include memory of at least 4GB. Reader should also be wifi enabled. Specifications Parameter Technical Specs Operating Frequency 13.56 MHz Power Supply 9V Standby Mode battery life 4 Hours Charging Time 4.5 Hours Transmitting Power 1W approximately Read Range Up to 25 cm Communication Interface USB Supported Transponders ISO 15693 3,

Two EAS Pedestals Library Security Gate , Security gate should include two theft detection pedestals, which are interdependent of each other and also have an overlapping protection zones providing additional security. The offer must be complete in all respects with CCTV integration and must include all the components required for the functional of the system Library security gate. It is planned to install these pedestals at a single location in the library. The system should have suitable number of I O ports for Standard electronic counter, web cam trigger, CCTV, locking gates etc. It should display and keep record of the footfall. It should also have multiline infrared motion sensors to detect library footfalls and in-out numbers. The data collected IN and OUT should be stored in house or Cloud based which can be downloaded for library record purpose. The security gate should have flap barriers to restrict unauthorized access. A sensor to read RFID card or fingerprint sensor should be incorporated in the gate to authorize the access. Gate should be movable on wheels not fixed to walls or floor. Specifications Parameter Technical Specs Operating Frequency 13.56 MHz Power Supply AC 230V 50Hz Power consumption 30W maximum Transmitting Power 0.5W to 6W variable Read Range Up to 1 m with pair of gates Communication Interface RS232 Ethernet Supported Transponders ISO 15693 3, I Code Operating Temperature minus 10 to Plus70 degree celcius. Communication Parameters Baud Rate 115200 Kbps Weight 25 Kg approximately Housing Material ABS PlexiGlass or similar Anti corrosive