Sher E Kashmir University Of Agricultural Sciences And Technology Tender

Freeze Drier(Lyophilizer) (Imported):- Detailed specifications:- • Microprocessor Controlled Laboratory scale freeze dryer with vacuum pump and facility for lyophilizing the products in vials and ampoules, sealing under vacuum. • Ice condenser performance: Capable of removing at least 1 lit of water in 24 h and holding at least 2 lit or more of ice before defrosting. • Total ice condenser capacity: 2 liters or more • Condenser temperature: -750C to -850C • Refrigeration : 2x1/3Hp CFC • LC display of system operation and set parameters, viz., ice condenser temp, vaccum time set • Automatic defrosting function. • Ice condensation chamber with high quality stainless steel inner condenser coils and drain valve. • Drying Chamber made of Stainless Steel with at least 12 ports for use of ampoule. • Comprising base plate/adaptor plate, three shelves, and distributors for ampoules/vials. Freeze drying ampoules and vials of 2 to 5 ml capacity (200 Nos must be supplied with the system) • System should have provision to start pump after condenser temp reaches -400C for safety • Vacuum Pump: High quality corrosion resistant, direct driven, double stage vacuum pump with gas ballast facility and safety valve capable of displacing at least 150 lits air per min for better performance. Pump should include exhaust filter, oil mist and odor filter elements with a spare set. Ultimate Pressure should be at least 2x10¯ 3 mbar. • Compact bench top design with small foot print. A trolley with wheels to keep the lyophylizer unit, vacuum pump and accessories. • Complete sealing device for vials and ampoules. • Electricity requirement: 220-240V, 50Hz. • Servo voltage stabilizer compatible with the system.

UV Spectrophotometer:- Detailed specifications:- • System should be flexible to handle micro volume, disposable and/or standard cuvettes and should be supplied with quartz cuvette and 200 nos. disposable cuvettes. Cuvette shaft should accommodate conventional quartz cuvette (UV range); Glass / plastic cuvettes (visible range). • Data transfer and analysis should be possible without any additional software. • System should have pre-programmed quantification methods. • Measuring principle: Absorption single-beam photometer with reference beam • Minimum Wavelength range : 200 –800 nm • Light source: Xenon flash lamp • Measuring results ( 1 ,000) can be saved directly on the device • 100 method programs in memory • Spectral band width: ~4 nm • Photometric measuring range: 0 A to 3.0 A • Random error: ± 0.5 % • Systematic error: ± 1 % • Light beam height: 8.5 mm • USB Port: 2-4 USB ports for data storage/Transfer, connectivity to PC, Printer etc • System should be supplied with branded Compatible UPS with at least half hour battery backup. • Should have European CE certificate • Warranty: 2-3 years after installation

Leaf Area Meter (Systronix):- Detailed specifications:-  Conveyer belt for continuous use  Adjustable press rollers so you can mea¬sure thick leaves, up to 2.5 mm  Resolution of 0.1 mm2 or 1 mm2  Sample size for recording leaf area: • Leaf Width: 2 mm to 25.0 cm • Leaf Thickness: Up to 2 cm and can be extendable • Leaf Length: Up to 3 m or more  USB connection along with PC software to transfer data files and to record measurements directly to a computer  Size: 20-25 cm H × 50-60 cm W × 70-75 cm L

Computers with UPS:- Detailed specifications:- Desktop Computer with InTel Core I3 Processor, 4 GB RAM, 1 TB Hard disk, USB Keyboard and Mouse, 19” TFT display -Double battery UPS -Preloaded Win8

Water Purification System:- Detailed specifications:- Water Purification System capable of producing type I (18.2 Mega ohm Resistivity) and Type III with Pretreatment cartridge, Reverse Osmosis, polishing cartridge and 0.22micron final filter. The system is capable of feed water acceptance up to 2000 micro Siemens conductivity, Fouling Index (SDI) 12, Total Chlorine 3 ppm. Prefiltration:- * 1 Stage pretreatment system. * 5 micron wrapped type depth filter. Purification:- * Pretreatment cartridge with anti scaling compound , activated carbon. * Pump with unique temperature feedback mechanism. * High flux Thin film composite polyamide RO membrane with 94- 99% rejection. * Permeate divert valve which will divert low quality product water to the drain. * Coaxial resistivity cell with a flow through design and a cell constant of 0.01cm-1. Display both compensated and non-compensated temperature accurate within ±0.1°C. * Type III Water flow rate @ 3 Liters /hr. * Single cartridge will produce (Type 1 + Type 3 Water) Pure and Ultra-pure Water. Storage Polishing:- *An inbuilt reservoir with 6.5 liter capacity. * Two stage Polishing cartridge with mixed bed ion exchange resin and activated carbon. * Co axial resistivity cell to measure the resistivity of the final product water. * Final product water is dispensed from 0.22 Micron final filter to produce bacteria free water * Colorful graphical display to show the water parameters like resistivity, temperature & alarms. Product water specifications (Type III) Deionized water: Ionic Rejection……………………………………... 94% Organic Rejection…………………………………. 99% Flow rate …………………………………………….. 3 Liters /hr Product Water specifications ( Type I ) Ultra pure Water : Resistivity……………………………………………... 18.2 Mega Ohms TOC ……..……………………………………………. 5-10 ppb Bacteria………………………………………………. 1 cfu /ml. Particulate........................……………………......... 1 /ml. Endotoxin…………………………………………… 0.001EU/ml RNase………………………………………………… 0.03ng/ml DNase………………………………………………… 4pg/µl Flow rate …………………………………………….. 0.5 Liters / min.

Desktop All- in-One with Printers :- Detailed specifications:- Desktop All-in-One , i3 processor, 4 GB RAM, 1 TB hard disk, Win10 HP Laserjet Printer

Single Plot Wheat Thresher with Electric Motor:- Detailed specifications:- a. Thresher Threshing cylinder size 12½” Ø 20” long both side cross float 1” Total length 22”. Peg cheisel type crossing round peg. Chasis made from 3” x 1½” channel, frame made 50 x 50 x 6mm angle iron, tyre & tube 600 x 19 standard, axle 48mm square. Power drive with air cooled diesel engine 6 H.P make standard It is propriety items of Rajiv Farm, Machinery, Hisar as this special type of thresher is only used by Plant Breeding Division of SAU’s to maintain Genetic purity of seed

Air Conditioner Split 2 tons with Transformer:- Detailed specifications:- 2.0 Ton split AC with copper condenser and suitable 5.0 KV transformer with copper winding delay start

5KVA online UPS:- Detailed specifications:- Wave: Pure sinewave with automatic battery charging with UPS off mode, Type: Single phase online UPS, Input:240±20%VAC, 50±5%, Single phase three wire(Phase Neutral ground); Output: 5 KVA, 230V±10%VAC, 50±5%Hz; Voltage Regulation ≤ ±2%; Overload cap.: 110% for ≤10 minutes, THDI: ≤ 5% on full load with charge mode, Batteries shall be sealed maintenance SMS or VRLA type, Backup not less 4 hrs at Full load with functional test certified & usual manual

Spectrophotometer:- Detailed specifications:- 1. Optical Design:- Dual beam 2. Spectral Band width 2 nm 3. Light Source Typical Lifetime:- Xenon Flash Lamp (5 years typical, 3 years guaranteed) Detector:- Dual Silicon Photodiodes Wavelength Range: 190–1100 nm Accuracy:- ±0.5 nm Repeatability:- ±0.2 nm Scan Speed:- Slow, medium and fast (up to 1600 nm/min) Data Resolution:- 0.2 nm, 0.5 nm, 1 nm, 2 nm, 5 nm Photometric Range:- –2A to +3.5A Display:- –3A to +5A Accuracy:- ±0.002A at 0.5A ±0.004A at 1.0A ±0.008A at 2.0A Repeatability:- 1 ±0.001A at 1A Noise:- 2 ≤0.00020A at 0A at 260 and 500 nm ≤0.00030A at 1A at 260 and 500 nm ≤0.00040A at 2A at 260 and 500 nm Drift:- 3 0.0005A/Hr Stray Light:- 1.0%T 198 nm (KCl) , 0.05%T at 220 nm (NaI), 0.03%T at 340 nm (NaNO2) Baseline Flatness:- ±0.002A Display:- 7-inch color touchscreen, fixed, high definition, 800 x 1280 pixels Keypad:- Touchscreen Sample Compartment:- Accessible from top, front or side Able to accommodate cells up to 100 mm pathlength Available accessory for test-tubes up to 25 mm diameter and 150 mm height. Removable, washable sample compartment liner with magnetic placement and hold-down Printer:- Snap on printer available

Fluoride and Iodine Ion Electrode:- Detailed specifications:- Description:- pH/ISE/ mV/ORP/Temperature benchtop meter kit with fluoride electrode and solutions, Iodide electrode and solutions, Glass-body pH electrode, ATC probe, stirrer probe and stand Range (pH):- -2.000 to 20.000 pH Accuracy:- (pH) ±0.002 pH Range (mV):- ±2000.0 mV Range (ORP):- ±2000.0 mV Accuracy (mV):- ±0.05% of reading Range (ISE):- 0.0001 to 19900 with selectable units of ppm, Molar, mg/L, %, ppb Accuracy (ISE) :- ±0.2 mV or ±0.05 % of reading Calibration Points (pH):- 1 to 5 Calibration Points (ISE):- 1 to 5 Range (Temperature):- -5.0° to 105.0° C Accuracy (Temperature):- ± 0.1°C Temperature Selection:- Manual or automatic with ATC temperature probe Display Type Graphic:- LCD with backlight Log Function Type:- Automatic data logging with Auto-Read and Timed measure modes; manual data logging with Continuous measure mode Memory:- 2000 with date and time stamp Alarm Output:- High/low limit alarm, calibration due alarm Methods:- 10 per channel with password protection Inputs:- BNC (pH, ORP or ion selective electrode), pin-tip (reference electrode), 8 pin MiniDIN (ATC temperature probe), stirrer input (stirrer probe) Outputs:- USB, RS232 Power Supply:- Universal AC adapter (included) IP Rating:- IP-54 Relative Humidity Range:- 5 to 85 %, non-condensing Certifications/Compliance:- CE, TUV 3-1 Warranty:- 3 years meter warranty

Water Bath Ultrasonic:- Detailed specifications:- Capacity:- 2- 3 Liters Frequency:- 37 kHz Heating:- + 10 to 80 degree Celsius ±5 Power consumption:- total 350 W Ultrasonic peak power:- max 300-500 W SWEEP mode:- Present for enhanced cleaning DEGAS mode:- Present for fast and efficient degassing of liquids. NORMAL mode:- Dissolving, mixing and dispersing Display time & temperature:- LED light Drain duct: Easy draining of cleaning liquid Warranty:- 1 Years Accessories:- Cover and Basket

Monopan weighing balance:- Capacity:- 220 g Minimum Display:- 0.1 mg Repeatability:- (Standard Deviation) ≤0.1 mg Linearity:- ± 0.2 mg Stabilisation Time:- *1 Approx. 3.0 seconds Operating Temperature and Humidity Limits:- 5-40˚C 20-85% *2 Temperature Coefficient for Sensitivity (10-30˚C):- ± 2 ppm/˚C Pan Size (mm):- approx Ø 91 Main Body Dimensions (mm):- approx 213 (W) × 356 (D) × 338 (H) Main Body Weight (kg):- approx. 6.2 Power Requirement:- 12V, 1A Internal Calibration Options Description EP-110 Printer I/O-RS cable Protection Cover STABLO-AP Ionizer USB conversion kit

ELISA Reader:- Detailed specifications:- • Wave length 400-750nm • Photometric methods single or dual wavelenth • Bandwidth 10nm • Photometric range 0.0-3.5OD • Resolution 0.001OD • Light source Tungsten halogen lamp [20W], 3000hr average lifetime • Linearity ≤ 1.0 % from 0.0-2.0 OD; ≤ 2.0% from 0.0-3.0 OD • Accuracy ± 1.0% or 0.010 from 0.000-3.000 OD AT 490nm • Reproducibility 1.0% or 0.005 OD from 0.0-2.0 OD; 1.5% from 2.0-3.0 OD • Photodetectors silicon photodiodes; 8 measurement 1 reference • Filters 8 position filter disk • Read time fast mode; 6 sec at single wavelength, 10 sec at dual wavelength, step mode: 15 sec at single wavelength, 25 sec at dual wavelength • Plate shaking 3 speeds: low, med, high; duration: 0-999sec • Plate types: 96 well microplate; maximum plate height : 16mm • Warm up time 3 min • Interchannel variation ≤1.0% or 0.005 from 0 to 3.0 OD • Stability and drift [at 490nm] ≤0.010 OD at OD= 1 at 490 nm single wavelength • Data output onboard graphical thermal printer and USB2 interface with PC or Mac data stations • Data storage calendar/clock function; 64 assay protocols • Multilanguage support 4 language ROM capacity; LCD indication supported; printout report supported • Dimensions [WxDxH] 34.6x37.7x16.4cm [13.6x14.8x6.5”] • Weight 5.5kg[12lb] • 3 years comprehensive warranty

Thermomixer :- • Max speed 3000rpm • Max temperature control range 100 deg C • Min temperature control range 15deg C • Temperature setting 1deg-100deg C • Timer 15 sec- 99 hours, continuous • Dimensions 20.6x30.4x13.6cm • Weight 6.2-6.5kg • Power supply220-240V,50-60Hz • Three year warranty required

Vertical gel electrophoresis unit with power pack and electro transfer unit:- A. Vertical gel electrophoresis I. 10 well II. 1.0mm thickness; 2 gel system includes 5 combs,5 sets of glass plates, casting stand, 2 casting frames, sample loading guide, electrode assembly, tank, lid with power cables, mini cell buffer dam III. Glass plate size [WxL] short plate 10.1x7.3cm, spacer plate 10.1x8.2cm IV. Gel size [WxL] 8.3x7 cm V. Typical run times for SDS PAGE 35-45min [at 200V constant] VI. Dimensions [WxLxH] 12x16x18cm VII. Weight 1.0kg VIII. 3 years comprehensive warranty B. Power pack I. Output range : 5-250V, 0.01-3.0 A current, 1-300W power II. Type of output[ with automatic crossover]: constant voltage, constant current or constant power III. Timer 1min-99hr,59 min IV. Display: 16 characterx 2 line LCD V. Programmable methods: 1 method up to 3 steps, no storage capacity VI. Safety features: overload/ short –circuit detection; overvoltage protection; no load detector sudden load change detection; ground leak detection VII. Operating conditions : 0-400C, 0-95% humidity VIII. Number of output jacks: 4 sets in parellel IX. Input power [actual]: 90-120 or 198-264VAC,50/60Hz, autoswitching X. Dimensions[ WxDxH] : 25.0x28.5x8.0 cm XI. Weight : 2.0Kg XII. 3 years comprehensive warranty C. Electrotransfer unit:- I. Construction • Electrode module: Molded polysulfone • Gel holder cassettes: Molded polycarbonate • Electrodes: Platinum wire 0.254 mm diameter • Cooling unit: Polyethylene. II. Overall dimensions • Trans-Blot cell : 16 (L) x 12 (W) x 18 (H) cm. • Gel holder dimensions : 10 x 11 cm. • Maximum gel size : 7.5 x 10 cm. • 2 gel holder cassettes, • 4 fiber pads, modular electrode assembly, blue. • cooling unit. 3 years comprehensive warranty

96 Well Gradient Thermal Cycler:- Specifications: 1. The 96 well Gradient thermal cycler should be supplied with Power Cord, Support ring for individual tubes, and Instruction Manual. 2. Specifications:. 3. Operational. 4. Should have a gradient capacity with Dynamic ramping. - Method of heating/cooling- Peltier. - Method of temp monitoring- Calculated & Block. - Programming:Step-based graphical. - Reporting: Exportable run logs, system logs. - Instant Incubation: Yes. - Memory: 500 typical programs onborad; unlimited with USB flash drive expansion. - Communication : 1 USB port. - Electrical Approvals : IEC , CE. - Display: 5.7'' VGA color touch screen. - Operating Temp : 15-31 deg C ambient. - Alphanumeric LCD Display. 5. Performance: - Sample capacity/sample size: 96 wells x 0.2ml (tube strips or 96-well plate). - Temp Range- 4 to 100 deg C. - Accuracy- +/- 0.5 deg C. - Uniformity- ±0.5°C well-to-well within 30 sec of arrival at target temperature. - Oil free Heated lid - Up to 110 deg C. - Maximum Ramp Rate - Up to 4.0 deg C / s. - Average Ramp Rate - Up to 2.5 deg C / s. - Reaction Volume: 1 to 100 µl. 6. License: - Licenced PCR : Yes. - IVD License: Yes. - Thermal Gradient - Gradient capability: Yes - Gradient Accutracy: ±0.5°Cof programmed temperature - Row uniformity: ±0.5°C well-to-well (within row) within 30 sec - Gradient range: 30-100°C - Temperature Differential Range: 1-25°C 7. Faster Optimization - Thermal gradient technology should optimize PCR assays in a single run by simultaneously testing eight different temperatures across a range of 25°C. - The system should adjusts the cycler ramp rate, ensuring that the incubation times across the eight rows during a gradient step are identical - More Efficient - System should compatible with reusable sealing mats to help minimize consumption of disposable plastics. - The power save mode automatically shuts off the display when the cycler is idle. - System should have automatic recovery in case of power failure. - 1 kva online ups UPS with 30 minutes back up should be provided. - 1 pack of 120/8 tube strips with caps should be provided. - Warranty- 3 years from the date of installation should be provided.

Automated Cell Counter:- 1. Automated Cell Counter -Count cells quickly, accurately, and consistently within 30 sec using the built-in auto-focus. 2. Should have Autofocus technology and sophisticated image analysis algorithm to eliminate the subjectivity of manual cell counting. 3. To be able to Counts cell lines, primary cells (from tissue or blood), and stem cells. 4. Should have Cell Gates, On-board dilution calculator, USB port, Date storage: approx-100 Counts, Sample volume: 10µl, Cell diameter range: 6-50 microns; Cell concentration range: 5x104 - 1x107 cells/ml. 5. Counting chamber depth: 100µm; Optimal cell concentration range, cells/ml-1 x 105 to 5 x 106 6. Product should have 2 years warranty.

Bio-safety Cabinet, Class II Type-A2:- 1. Microprocessor controlled Biological Safety Cabinet with single piece Stainless 2. Steel 304 work surface and dimension of 4’x 2’x 2’. 3. Side & back wall made up of single piece stainless steel 304 with rounded corner for easy cleaning & disinfections procedure. 4. Bio-safety Cabinet Class II type A2 i.e with 70% re-circulation and 30% exhaust. 5. Front 10º slanted to offer operator comfort while working for long time. 6. Frequency controlled drive based dual fan motor system for each separately for laminar flow and exhaust. 7. The motor must automatically adjust the airflow speed without the use of damper to ensure continuous safe working conditions. 8. 6 mm UV resistant front glass window with adjustable balancer suspension. 9. Equipped with anti-explosion, anti-splash power socket, water/media and Gas inlet. 10. ULPA/HEPA-14 filter with efficiency more than 99.9995% of 0.12µm / 0.3µm. 11. Filter lifespan display function with filter real-time alarm function. 12. Display screen should provide information about Air exhaust value, Laminar flow value, real time counter for exhaust & laminar fan , UV elapse hour counter and Filter lifespan. 13. Safety alarm for low exhaust, low laminar flow, fault of exhaust fan, fault of laminar flow fan, closing condition of visible window. 14. UV interlocking with front window i.e UV light should be closed automatically when front window is open. 15. Standard compliance EN 12469 Certified / NSF for Microbiological safety or equivalent, ISO 14664.1 class 3 for air cleanliness or equivalent. 16. The manufacturer an ISO 9001 –2000 certified. 17. Power supply 220V, 50/60Hz. 18. Warranty for 2 years.

Ultra-low temperature Freezer (-86 °C), Upright model:- 1. Freezer should be of 550 to 600 Liters capacity 2. System should have Programmable operating temperature from –50°C up to –86°C with 1°C increment 3. Fully programmable microprocessor controlled with membrane keypad and eye level control panel. 4. Construction should be of Polyurethane foam insulation. 5. System should be made up of 18 gauge Steel, 1.2 mm thick with powder coated paint to resist scratch and rust and the interior should be Polished with 304 SS for easy cleaning and to eliminates potential for oxidation. 6. Inner door should have silicone seal to prevent temperature loss and Outer door should have safe silicone triple point seal 7. Freezer should have 4 adjustable shelf’s with five separate inner doors. 8. Ambient to -85 C pull down timing should be not more than 5.5hrs 9. Freezers should have heated air vent and front panel air filter. 10. Should have security keyed locks on the outer doors and lids keep out unauthorized users 11. Freezer must have battery back-up and Password security lock for unauthorized tampering. 12. Freezer must have RS 485 interface data logging port and it must also have on board 13. diagnostic software. 14. Audible and visible alarms for temperature, power failure, system failure, battery low etc. 15. and it also have remote alarm port for connection to an auto dialer. 16. Freezer must use CFC-FREE, HCFC-FREE non-flammable refrigerants, and refrigeration system must be energy efficient and hermetically sealed two stage cascade refrigeration system. 17. Freezer must have ISO 9001 standard quality test requirements and IEC 61010 Electrical safety CE & UL certified. 18. Freezer should be European CE Certified. 19. Freezer should have a capacity to withhold 40,000 or more vials of 2ml. 20. Freezer should be supplied with Factory calibrated certificate and IQ, OQ, PQ should be provided. 21. Power Consumption should not more than 15kWh/day. 22. Heat Output should not more than 450Watt. 23. Freezer should be supplied with 5KVA voltage stabilizer.

Immunomagnetic Cell Sorter:- 1) Immunomagnetic cell separator and should be gentle to cells. 2) Can able to perform Immunomagnetic cell sorting of cells including rare cells population. 3) Capable to do positive selection and negative selection of cells. 4) Should use particles which should not interfere in any downstream applications (for example – flowcytometry & function studies) 5) System is capable to isolate up to 0.1 to 2.5 x 108 cells when isolating rare cells per separation. 6) Cell Separation System should be column free 7) System should capable to release magnetic particles after cell separation. 8) Product should supply with minimum 3 years warranty.

Online UPS 5KVA:- UPS Capacity = 5KVA Online with Isolation Transformation Input Voltage range = 160V – 280V AC Frequency = 50Hz ± 0.05Hz Output Voltage = 230V ± 1% Waveform = Sine wave Battery Bank = 144V/180V DC Metering = Digital Static Bypass = Available Back up Time = 1 hr.

CCTV surveillance system:- CCTV surveillance system for an area of 2 x (70 ft x 20 ft). 1. Imaging device: HD Camera (16 or more cameras). • 2M CMOS, Full HD (1,920 x 1,080, 30fps) resolution. • Day & Night (ICR), Auto (ICR) / Color / B/W, DWDR, SSNRIV, Motion detection. • 0.25Lux@F2.1 (Color), 0Lux@F2.1 (B/W : IR LED on). • Built-in 3.6mm or higher mm fixed lens. • IR viewable length 20m, IP66. • Easy installation (Plug & play) • Operating Temperature / Humidity: -30°C to +55°C (-22°F ~ +131°F) / 90% RH 2. HD Real-time DVR. • 16CH 1080p real-time DVR. • Upto 480/400(1080p)fps recording time . • HDMI / VGA video output. • Smart phone support (Android / iOS) • LiveDisplay. i. Frame Rate NTSC : 480fps / PAL : 400fps ii. Resolution NTSC : 1920 x 1080, 1280 x 720, 960 x 480, 704 x 480 iii. PAL : 960 x 576, 704 x 576 • Multi Screen Display 1 / 4 / 7 / 9 / 13 / 16 / 16A / Sequence / PIP • Storage a. Internal HDD Up to 8 SATA HDDs b. 8 TB storage capacity c. External (e-SATA Interface) 2 ports d. USB (Backup) USB 2.0, 2 ports (Front 1, Back1) e. File Format (Backup) BU (DVR player), SEC (Include player), AVI • Interface a. Monitors:- i. VGA 1 VGA (1280 x 720, 1280 x 1024, 1920 x 1080). ii. HDMI 1 HDMI (1280 x 720, 1280 x 1024, 1920 x 1080) b. Alarm:- i. Inputs / Output Terminal 16 inputs (NO/NC) / Terminal 4 relay outputs (NO/NC),Rating : 30V DC / 2A, 250V AC / 0.25A. ii. Remote Notification via e-mail c. Connections:- i. Ethernet 1 RJ-45 10/100/1000 Base-T ii. Serial Interface RS-232/RS-485 (Full duplex) for PTZ, system keyboard iii. USB 2.0, 2 ports iv. Support Mouse, Remote controller 3. Essential Accessories:- • Power supply: 12v 20 Amp-(SMPS). • Wired (full copper) connectivity. • UPS 2KVA online. • LED display monitor (24 inch) of repute brand. • External hard disk (1TB): 02 No. • Branded desktop computer (8GB RAM, 1tb Hard disk) for analysis and editing of videos. 4. Warranty: At least 3 year. 5. Authentication: CE certification 6. Service and support: The Vendor should have a good service and application support back up

High Performance Storage Server with Software:- 1 Software Windows. 2. Form Factor Tower. 3. Processor Make Intel. 4. Max. Number of sockets available on chipset 2. 5. Max. Number of sockets populated with processor 1 6. Number of core per Processor 8. 7 Processor Configuration Intel Xeon Silver 4110 (2.10GHz/8-core/11MB/85W). 8. Chipset compatible with CPU C622. 9 PCI Slots (Express Gen 3.0) 6 10 Type of RAM DDR4 . 11 RAM Size (GB) 32. 12 RAM upgradable upto (GB) 756. 13 DIMM Slots (No.) 12 . 14. Type of Hard Disk Drive RAID 15 Hard disk drive Capacity (GB) 4000 16 Hard disk drive Speed (RPM) 10K 17 RAID Controller Cache (MB) 1024 18 RAID Type 0 19 RAID Controller Ports @12 Gbps 8 20 Video Controller (support VGA or above resolution) Yes 21 Monitor 21 Inch LED (DELL) 22 Keyboard Yes (DELL) 23 Mouse Yes (DELL) 24 Bays (min. 2 internal or more hot plug) 8 25 USB Ports (version 2.0/3.0) 4 26 Certifications Compliance support by Windows, Red Hat or Novell or Oracle Cluster S/W Yes 27 DVD ROM (or better) 8x or better 28 Network Card Supported 1G 29 Power Management Screen blanking, hard disk & system idle mode in power on, set up password, power supply surge protected 30 Redundant Power Supply Yes 31 Redundant Fan Yes 32 Total No of Ports 4 x 1 Gbps.33. Server scalability to be achieved within the box without adding nodes Yes. 34 RoHS Compliance Yes 35 BIS Registration number & its Validity R-41000698 36 Max. power consumption of the system (Watt) 750 37 Power Supply 230 V +/-10%, 50 Hz 38 On Site OEM Warranty (years) 3

High performance computer Cluster with software:- 1 Software Windows. 2. Form Factor Tower . 3 Processor Make Intel. 4. Max. Number of sockets available on chipset 2 5 Max. Number of sockets populated with processor 2 6 Number of core per Processor 8 7 Processor Configuration Intel Xeon Silver 4110 (2.10GHz/8-core/11MB/85W) 8 Chipset compatible with CPU C622 9 PCI Slots (Express Gen 3.0) 6 10 Type of RAM DDR4 11 RAM Size (GB) 32 12 RAM upgradable upto (GB) 756 13 DIMM Slots (No.) 12 14 Type of Hard Disk Drive SSD 15 Hard disk drive Capacity (GB) 1000 16 Video Controller (support VGA or above resolution) Yes 17 Monitor 21 Inch LED (DELL) 18 Keyboard Yes (DELL) 19 Mouse Yes (DELL) 20 Bays (min. 2 internal or more hot plug) 8 21 USB Ports (version 2.0/3.0) 4 22 Certifications Compliance support by Windows, Red Hat or Novell or Oracle Cluster S/W Yes 23 DVD ROM (or better) 8x or better 24 Network Card Supported 1G 25 Power Management Screen blanking, hard disk & system idle mode in power on, set up password, power supply surge protected 26 Redundant Power Supply Yes 27 Redundant Fan Yes 28 Total No of Ports 4 x 1 Gbps 29 Server scalability to be achieved within the box without adding nodes Yes 30 RoHS Compliance Yes 31 BIS Registration number & its Validity R-41000698 32 Max. power consumption of the system (Watt) 750 33 Power Supply 230 V +/-10%, 50 Hz 34 On Site OEM Warranty (years) 3

SomaScope Smart Somatic Cell Counter:- Technology Fluorescence:- flow Cytometer Milk samples:- For fresh or preserved cow, sheep, goat, buffalo, and camel milk Measuring range: From 0 to 1 x 107 cells/ml Measuring speed: 100 samples per hour Repeatability (CV*): 7 to 3.5% at 1 x 105cells/ml 5 to 2.5% at 3 x 105 cells/ml 4 to 2% between 0.5 x 106 cells/ml Accuracy (CV*): 10% relative to Direct Microscopic Somatic Cells Count Linearity: Up to 1 x 107 cells/ml Sample volume: 10 ml Sample temperature: +40°C ± 2°C (+104°F ± 35°F) Carry-over: 1% Configuration Integrated flow cytometer unit Integrated sample preparation unit Automatic cleaning system Double photo detector multiplier system Computer with Somatic cell count software Reagent bottles. Ethernet communication port. Spare part kit for first 6 month User manual Power supply: 110 V-240V, 50 to 60 Hz, 150 VA incl. PC. Light source LED Consumables Cleaning liquid Measuring liquid Staining solution Somatic cell count pilot kit Somatic cell count calibration kit Standards/ approvals: Complies with ISO 13366/IDF 148-2 and international standards