Sher E Kashmir University Of Agricultural Sciences And Technology Tender

Supplying and erection of galvanised 'D' iron clamps complete with shackle insulator (75 mm X 90 mm),G. I. bolts, nuts and washers, coach screws etc. as required.

Supply /Installation and testing of 160 KVA 11/0.440 KV 3 phase copper wound distribution transformer , Make Equivalent with oil complete and confirming as per IEE rules and complete with test certificates including BI metallic clamps , lugs etc duly (Complete specifications are given at the end) BIS/IS approved/ Level 1 as per IS : 1180 ( Part -1) : 2014

Ch. Iron 100x50x8’long 8 MM with clamps , angle iron brace with nuts With muky clamps nuts and bolts etc

Ch. Iron 75x40x8’long 6 MM with clamps , angle iron brace etc. With muky clamps nuts and bolts etc

Angle iron 50x50x4mmx6ft Brace ( 50 mm X 50 mm X 6 mm angle iron )

Collar for pole 6 mm

Cable 3.5 core 150 Sq mm Al armoured

S/I of transformer jacket fabricated x 10 ft out of 40 mm MS . Complete in all respects

S/I of Earth tester clamp On ground resistance tester Make Motwane/ Meco Digital type

Earthing with G.l. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.l strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.l. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G. I. nut bolt & spring washer spaced at 50mml

Supply and painting of each Pole 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint)

Fabrication, supply, installation, testing & commissioning of outdoor type compartmentalized feeder pillar having front area not less than 0.60 Sqmtr (900 mm x 900 mm) and depth 45 Cm (NS) made out of 2mm thick CRCA sheet with tappered roof having separate cable and bus bar alley, 1 door arrangement i/c locking arrangement, having 400 Amp four pole aluminium bus bar of full length with base frame made out of 50mmx50mmx6mm (thick) angle iron having 80cm legs for erection in ground with construction of cement concrete suitable foundation size complete with connections and interconnections with copper conductor PVC insulated cables/ insulated aluminium busbar strips of appropriate size and terminal blocks (on outgoing) including supplying & fixing following switchgears & accessories there in, powder coating, labelling, earthing etc. complete as required. Providing and fixing following accessories in existing cubical panel board i/c making connection etc. as reqd. For 250 KVA Sub station with 1000 A Bus Bar Al 4 Strip.Details as under Panel Powder Coated 2.0mm MCCB 250 A 4P 50kA , Thermal release 50KA 1 No. handle extender typeDigital V,A,F, PF Meter Class 1.0 L&T 2 No.CT 600/5 AE 2 SetSpreader Terminals For DU MCCB 1 Set , , Panel Accessories like nut bolts, locks, etc

Supplying and erection of 11 KV pin insulator complete with large steel head G. I. pin, nuts, washers etc. as required

33 kV link set Heavy duty complete with all accessories ISI standard Heavy duty 600 Amp

11kV lightening arrester set Heavy duty complete with all accessories ISI standard Station type

11kV drop out set Heavy duty complete with all accessories ISI standard

Muky claps /J hook , galvanized nuts and bolts as required for all items included . Complete job for entire work

S/l of Guy with turn buckler and Guy insulator etc, 8 SWg twisted GI wire laid in cement concrete . Complete job in all respects.

Supply of bamboo ladder 30 ft long 1 No, Plier 8 Inch =2 no , Screw driver set = 1 No , crimping tool hydraulic type upto 630 mm size = 1 No

Note:-The rates quoted are inclusive of all carriages of materials (Mechanical/Manual) from source to site work and all extra charges including dewatering if any during the execution of work till complete in all respects.