Public Works Department Tender

High side For Comfort Cooling & Heating (HVAC) Air To Water Heat Pump Units,Reversible Supply, Installation, Testing & Commissioning of Micro Processor Controlled, Eurovent / AHRI certified air cooled scroll Heat Pump delivering actual capacity as per the following parameters duly installed at site. The Heat Pump should be complete with multiple hermatic scroll compressors , Electronic Expansion Valve, V shaped Air Cooled Condenser coil with Copper tube / aluminum fins with Axial fans with IP54 protection having condensation control with fan speed controller, Shell & Tube or Plate Type Heat Exchanger on evaporator with suitable insulation, anti-vibration rubber mounts with factory assembled with Electrical panel mounted on the heat pump including the disconnect switch suitable for 50 Hz, 3 phase 415 volts, ac supply, BMS compatibility with interface card. Refrigerant circuit to include liquid line-drier filter with replaceable solid cartridge, liquid line sight glass, EEV, high pressure safety valve, high & lower pressure transducers, high and low pressure switches, etc. The heat pump shall be suitable for operation on Environment friendly refrigerant and shall come from factory charged with refrigerant. Cooling Capacity : ≥130 KW Water Flow Rate : ≥ 327 LPM Chilled Water 'In' : 12 °C Chilled Water 'Out' : 7 °C Hot water 'In' : 45 °C Hot water 'Out' : 50 °C Designed Air entering in condenser : 0 °C for Winter Operating Range : 0°C to 43°C Customs Duty, Port Clearance and Local Taxes shall be included in the cost Heat Pumps For Ward No. 4,5,8,9,12,14 & Spinal ward

High side For Comfort Cooling & Heating (HVAC) Air To Water Heat Pump Units, Reversible Supply, Installation, Testing & Commissioning of Micro Processor Controlled, Eurovent / AHRI certified air cooled scroll Heat Pump delivering actual capacity as per the following parameters duly installed at site. The Heat Pump should be complete with multiple hermatic scroll compressors , Electronic Expansion Valve, V shaped Air Cooled Condenser coil with Copper tube / aluminum fins with Axial fans with IP54 protection having condensation control with fan speed controller, Shell & Tube or Plate Type Heat Exchanger on evaporator with suitable insulation, anti-vibration rubber mounts with factory assembled with Electrical panel mounted on the heat pump including the disconnect switch suitable for 50 Hz, 3 phase 415 volts, ac supply, BMS compatibility with interface card. Refrigerant circuit to include liquid line-drier filter with replaceable solid cartridge, liquid line sight glass, EEV, high pressure safety valve, high & lower pressure transducers, high and low pressure switches, etc. The heat pump shall be suitable for operation on Environment friendly refrigerant and shall come from factory charged with refrigerant. Cooling Capacity : ≥130 KW Water Flow Rate : ≥ 327 LPM Chilled Water 'In' : 12 °C Chilled Water 'Out' : 7 °C Hot water 'In' : 45 °C Hot water 'Out' : 50 °C Designed Air entering in condenser : 0 °C for Winter Operating Range : 0°C to 43°C Customs Duty, Port Clearance and Local Taxes shall be included in the cost Heat Pumps For Ward No. 1,6,10,15 & Radiology Department

High side For Comfort Cooling & Heating (HVAC) Air To Water Heat Pump Units, Reversible Supply, Installation, Testing & Commissioning of Micro Processor Controlled, Eurovent / AHRI certified air cooled scroll Heat Pump delivering actual capacity as per the following parameters duly installed at site. The Heat Pump should be complete with multiple hermatic scroll compressors , Electronic Expansion Valve, V shaped Air Cooled Condenser coil with Copper tube / aluminum fins with Axial fans with IP54 protection having condensation control with fan speed controller, Shell & Tube or Plate Type Heat Exchanger on evaporator with suitable insulation, anti-vibration rubber mounts with factory assembled with Electrical panel mounted on the heat pump including the disconnect switch suitable for 50 Hz, 3 phase 415 volts, ac supply, BMS compatibility with interface card. Refrigerant circuit to include liquid line-drier filter with replaceable solid cartridge, liquid line sight glass, EEV, high pressure safety valve, high & lower pressure transducers, high and low pressure switches, etc. The heat pump shall be suitable for operation on Environment friendly refrigerant and shall come from factory charged with refrigerant. Cooling Capacity : ≥130 KW Water Flow Rate : ≥ 327 LPM Chilled Water 'In' : 12 °C Chilled Water 'Out' : 7 °C Hot water 'In' : 45 °C Hot water 'Out' : 50 °C Designed Air entering in condenser : 0 °C for Winter Operating Range : 0°C to 43°C Customs Duty, Port Clearance and Local Taxes shall be included in the cost Heat Pump For Ward No. 2,7,11 & Control room