Public Works Department Tender

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height, backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete : (To be secured to the backing by means of cramps which shall be paid for separately) Red sand stone - exposed face fine dressed with rough backing 40mm thick

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).Overhead informatory road signage.

Hydra /JCB engaged for dismantling /uninstalling of street light in chowk and refixing / installing/errecting complete Job (NSI)

Providing and laying River bed material in layers not exceeding 20 cm in depth incld. Rolling, watering, and consolidation with power road roller of 8-10 tonne all leads lifts carriages complete (NSI)

Provision for Granite stone including engraving of letter etc fixing complete job including retroflective tape (NSI)

Providing and installation of all in one 12 w solar light, 80mm dia 3mm thick 6 mtr long m.s pipe,paint and concrete base complete job as per the direction of Engineer - In- Charge Specifications:- system wattage 12w pir sensor yes luminaire efficasy 120-125 lm/w warranty 1 yrs pv module mono battery(lifepo4) 12.8v, 12ah (bis certified) led lamp life 50,000 hrs charging time 1 day pole dia 50-100mm ingress protection ip65 make ( BAJAJ/PHILIPS/ LUMONARE/APN) (NSI)

Providing and installation of 9 w bollard light, providing and fixing i/c transportation complete in all respect 9 watt bollard bgbol 605 9w led bis/isi of philips/bajaj/wipro make,providing and laying of 1x1.5 sq mm frlsh wire anchor/havells/ polycab make,providing /laying i/c excavating of trunch/surface 2 core 6sqmm al.ar cable havells/gloster/polycab make,s/i/t and commissioning of feeder panal out door,standing type dust and verman proof with door locking arrangements, consisting of1)63 a dp mcb 2)40 a dp mcb 3)63 a al bus bar,p/l of 25mm pvc conduit in surface /recess/trunch medium class anchor/akg/fonolex make,concrete base for bollards complete job as per the direction of Engineer - In- Charge (NSI)

Providing and fixing of led video display screen supply i/c transportation at site of p6led outdoor display 6'x3' led screen with iron pole( 8 feet long & 8" dia),foundation of concrete 3'x3'x4' along with nut and bolts (18mm 2.6 feet long)and base plate complete in all respects,s/i/t/c of 4 kva servo stabiliser copper wound,i/t/c/training of led display,provision for electric supply to led display complete job as per the direction of Engineer - In- Charge specifications pixel pitch p-6 mm 192mmx192mm led display outdoor, pixel density 27777 dots/m2, module unilium or gkgd, power supply 5v40amp rong, cabinet cnc, power voltage 150v to 240 v, pixel cong 2525 lamp, viewing distance 6 meter, smd 1r1g1b, rf 1200hz, 50-60-hz, input voltage ac220/50hz, life span 100000hrs, processor c16c communication direct computer link via rj 45 or wifi within display range. contrast regulation 16 grades, temperature range (-/+ 20c - 55c.) (NSI)

Carriage of Sand for Avg Distance of 30 km by MT

Carriage of Aggregate for Avg Distance of 1 km by MT