Public Works Department Tender

Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.

Public Works Department - PWD Tender

Works
Civil And Construction
Building Construction
Eprocure
Opening Date27 Jan 2025
Closing Date10 Feb 2025
Tender Amount₹ 4,38,85,000 
Notes
Download

AI Insights

Bid Capacity
... View More
The bid capacity required can be calculated using the formula: Available Bid capacity = (A x N x M) - B, where A is the maximum value of civil engineering constructions works executed in any one year during the last five financial years, N is the number of years prescribed for completion of the work, M is a multiplying factor of 2.50, and B is the value of existing commencements and on-going works to be completed during the next ‘N’ years. However, specific details about the values of A, N, and B are not provided. An alternative calculation method is also mentioned, which is Available Bid Capacity = (Minimum Annual Value of General Construction Work) * 2, where Minimum Annual Value of General Construction Work = Annual Turnover from Civil Engineering Construction Works * 0.5. But the actual values for these variables are not given. Therefore, the exact bid capacity required cannot be determined.
Technical Capacity
... View More
The required prior work experience for the bidder includes: - Project Manager: B.E Civil + 10 Years Exp or Diploma in Civil with 15 years experience - Site Engineer: B.E Civil + 3 Years Exp or Diploma with 7 years experience - Plant Engineer: B.E Mech. + 3 Years Exp or Dip. Mech.+ 7 Years Exp - Quantity Surveyor: B.E Civil + 7 Years Exp or Dip. Civil + 10 Years Exp - Soil & Material Engineer: B.E Civil + 7 Years Exp or Dip. Civil + 10 Years Exp - Survey Engineer: B.E Civil + 5 years Exp or Dip. Civil + 8 years Exp The value and percentage of similar works completed are as follows: - Three similar completed works costing not less than 40% of the estimated cost - Two similar completed works costing not less than 50% of the estimated cost - One similar completed work costing not less than 80% of the estimated cost No specific percentage of similar works completed is mentioned in terms of the bidder's overall experience, but the bidder should have experience in construction. The bidder should also demonstrate access to financial resources, with a liquid asset and/or availability of credit facilities of not less than the amount indicated, usually the equivalent of the estimated cash flow for three months in the peak construction period.

Costs

Summary

Construction Of Chief Engineer Pw(rnb) North Office At Dalina Baramulla

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

625.9

218

136696.56

... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages

73.18

5513

403503.54

... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages

244.43

8085

1976314.32

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages

401.98

10118

4067575.32

... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages

181.1

9692

1755347.97

... More
Engagement of laboures for Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish outside the periphery of the area cleared as per the directions of site engineer

25

650

16250

... More
Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . including all carriages.

871.65

286

249596.98

... More
Centering and shuttering including strutting, propping etc. and removal of form for columns,pillars,piers,abburtments,posts and struts including all carriages.

1129.18

742

838416.15

... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams,plinth beams, girders, bressumers and cantilevers including all carriages.

455.58

577

263120.23

... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. including all carriages.

35.13

628

22095.01

... More
Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms. including all carriages.

902.74

718

648347.87

... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 50 mm thick with 20mm nominal size stone aggregate, including all carriages.

447.17

577

258218.32

... More
Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position incld soffits and applying a priming coat of approved steel primer all complete, including all carriages.

24378.21

138

3369068.62

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages.

115850.86

115

13322848.9

... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size) including all carriages.

74.16

6902

511867.15

... More
Providing and fixing colour coated galvalume High Rib profile sheets 0.50 mm TCT (Total coated thickness) having a crest height of 28-32 mm at 195 mm and effective width of 975-1000 mm and length to suit site requirements to the purlins using self drilling and self tapping fasteners of reputed make with purlin sheet using self drilling and self tapping fasteners and fixing flashings,valleys and ridges hips of colour coated galvalume plain sheet using using self drilling and self tapping fasteners of reputed make complete and as directed.All types of steel sheets shall be load tested to satisfy 1.1 times the design wind load and coating thickness to the satisfication of the site Engineer.the fasteners shall also be load tested including cost of ridges ,hips and valleys of Pre-colour coated plain sheets of required size and thicknes complete 0.50 mm thick all inclusive.The Contractor has to submit design and drawing for approval on the sheet profile ,design and fabrication deatail before installation incld cost and carriage of all material involved from source to site of work.

758.44

1350

1023894

... More
Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) First class Kail wood including all carriages

4.44

108897

483504.23

... More
Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 Cement : 4 coarse sand ) and curing complete. The rate includes providing and placing in position 2 nos. 6 mm dia M.S bars at every third course of masonry work.including all carriages from source to site of work

513.25

8710

4470407.5

... More
Providing and fixing of 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages.

456

207

94551.6

... More
Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including panelling of prelaminated particle board laminated on both sides Grade I, Type II IS : 12823 marked, all complete as per direction of Engineer-in-charge. First class kail wood including all carriages.

167.15

3950

660242.5

... More
Supplying and filling in plinth with Nallah Muck/GSB under floors including, watering, ramming, consolidating and dressing complete, including all carriages.

1158.25

850

984512.5

... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm upto 2.50 sqm). including all carriages.

197.96

7863

1556707.95

... More
Providing and fixing glazing in uPVC/ aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) including all carriages.

133.83

1061

142120.77

... More
Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages.

521.8

64

33708.28

... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work including all carriages.

521.8

131

68799.33

... More
Providing and fixing of Anodised aluminium hardware fittings of approved brand including necessary screws etc.(Sample to be got approved from the competent authority )

-

-

-

... More
T-Bolts 150mm

60

90

5400

... More
Handles 150mm

150

100

15000

... More
L-Drop 300mm

33

550

18150

... More
Providing and applying white cement based putty 2 mm thick of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete incld.all carriages

4897.51

181

886694.19

... More
Providing and fixing of 4 mm thick float glass panes to door, window, and ventillator frames(fixed portion) embeded in putty and fixed with painted beadings including cost of nails etc and all carriages complete

16.73

950

15893.5

... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown including all carriages

150.84

1222

184371.73

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including all carriages.

878.25

1229

1079457.08

... More
Providing and Fixing of anchor Bolts of size 16 mm dia and 450 mm long complete with nuts embedded in concrete foundation block for holding of Truss including priming coat and all carriages upto site of work.

24.51

170

4166.7

... More
Providing and fixing of plain eaves boarding 300mm x 40 mm (nominal size) 2nd class kail wood incl cost of nails,nuts and bolts,screws etc and carriages complete.

143.45

1007

144525.88

... More
Sanitary;- Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil, incld. removal of tree stumps and dewatering of trenches during execution of work..

151.12

187

28304.78

... More
Supply and filling of dry stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete

5.23

1000

5230

... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages.

3.96

5513

21834.85

... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size) including all carriages

11.89

6902

82067.16

... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages

22.7

8085

183538.58

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages.

1930

115

221950

... More
Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . including all carriages.

594.8

286

170320.98

... More
Centering and shuttering including strutting, propping etc. and removal of form for suspended floors,septic tank and soakage pit slab,water sump slab,etc,. including all carriages.

66.64

450

29988

... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 50 mm thick with 20mm nominal size stone aggregate, including all carriages.

52.04

577

30050.5

... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages.

39.95

8701

347642.9

... More
15 mm Cement plaster on the rough side of single or half brick wall of mix: 1:4 (1 cement:4 coarse sand), including all carriages complete.

113.01

331

37440.21

... More
Dry random rubble masonry with hard stone in foundation and plinth using quarry stone with bond stone including all carriages.

22.77

5864

133542.64

... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall,carriages etc.

-

-

-

... More
PN-16 pipe , 25mm OD(SDR-7.4)

300

461

138570

... More
PN-16 pipe , 32mm OD(SDR-7.4)

300

519

155925

... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.External work including trenching, refilling ,carriages etc.. PN-16 pipe , 63mm OD(SDR-7.4)

50

626

31310

... More
PN-16 pipe , 40 mm OD(SDR-7.4)

100

399

39945

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore including all carriages

35

691

24209.5

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 32 mm nominal bore including all carriages

35

750

26250

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 40 mm nominal bore including all carriages

20

834

16692

... More
Providing and fixing of PPR unions 25 mm

200

353

70650

... More
Providing and fixing of PPR unions 32 mm

150

406

61020

... More
Providing and fixing of PPR unions 40 mm

100

500

50045

... More
Providing and fixing of PPR unions 63 mm

30

941

28258.5

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 65 mm nominal bore incld all carriages

20

1646

32921

... More
Providing and Fixing of PVC soil/waste/ventellating pipes with fittings like P-bend,D-bend,P or S-trap,F-Trap, collar,junction,Door Tee, Reducer, stays /clamps,vent cowel etc (B-Type) of approved brand and manufacture (Prince/ Supreme or Equivalent brand) incld all carriages 150 mm dia

160

650

104000

... More
Providing and Fixing of PVC soil/waste/ventellating pipes with fittings like P-bend,D-bend,P or S-trap,F-Trap, collar,junction,Door Tee, Reducer, stays /clamps,vent cowel etc (B-Type) of approved brand and manufacture (Prince/ Supreme or Equivalent brand) incld all carriages 100 mm dia

220

550

121000

... More
Providing and Fixing of PVC soil/waste/ventellating pipes with fittings like P-bend,D-bend,P or S-trap,F-Trap, collar,junction,Door Tee, Reducer, stays /clamps,vent cowel etc (B-Type) of approved brand and manufacture (Prince/ Supreme or Equivalent brand) incld all carriages 75 mm dia

260

395

102700

... More
Providing and Fixing of PVC soil/waste/ventellating pipes with fittings like P-bend,D-bend,P or S-trap,F-Trap, collar,junction,Door Tee, Reducer, stays /clamps,vent cowel etc (B-Type) of approved brand and manufacture (Prince/ Supreme or Equivalent brand) incld all carriages 50 mm dia

150

275

41250

... More
Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 15 mm nominal bore including all carriages

120

118

14256

... More
Providing and fixing of CP brass fittings of approved quality and manufacture (Hindware, Cera, Jaguar or Equivalent Quality) with all fittings and fixtures complete ( Sample to be got approved from the competent authority) Health faucet ( Hand Shower ) with CP flush pipe ,CP Nozzel & Hook

30

1350

40500

... More
Providing and fixing of water heating geysers of approved brand & quality (Venus/ Jaguar/ Racold or eqviuallent) with all necessary fittings and fixtures complete Job. 50 Ltr capacity including all costs and cariages complete

18

18000

324000

... More
Providing and fixing of water heating geysers of approved brand & quality (Venus/ Jaguar/ Racold or eqviuallent) with all necessary fittings and fixtures complete Job. 25 Ltr capacity including all costs and cariages complete

8

12000

96000

... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 including all carriages

250

582

145587.5

... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. including all carriages 15 mm nominal dia

2

6805

13611.6

... More
Providing and fixing CP Brass Double lever wall mixer with concealed shower of approved quality & make as approved by Engineer in charge. including all fittings,accessories and carriages

10

4735

47350

... More
Providing and fixing CP Brass Double lever wall mixer of approved quality & make as approved by Engineer in charge. including all fittings,accessories and carriages

20

3800

76000

... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid including all carriages

10

5632

56324

... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including all carriages

6

5493

32959.5

... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 literwhite P.V.C automatic flushing cistern. including all carriages

6

5342

32054.1

... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer including all carriages

24

4841

116188.8

... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. including all carriages

24

1474

35379.6

... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250mm including all carriages.

2

6166

12333.8

... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Semi rigid pipe 32 mm dia including all carriages

30

137

4122

... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including all carriages

24

1595

38282.4

... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms including all carriages

30

803

24105

... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.including all carriages

30

248

7453.5

... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.including all carriages

40

287

11500

... More
Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.including all carriages

40

230

9200

... More
Providing and fixing toilet paper holder C.P. brass including all carriages

30

1011

30352.5

... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in charge.including all carriages

200

69

13970

... More
Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms..including all carriages

45

196

8860.5

... More
Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia. including all carriages

70

51

3598

... More
Providing and fixing of Master trap of required size and shape of approved quality and make including all fittings asdirected by EIC complete job including all carriages

6

630

3780

... More
Providing & Fixing of 2.0 HP Motor with all fittings like inlet and outlet connections , electric controlled setup with service line including making of Plateform as per requirement covered with CGI Sheet fixed over angle iron frame work with all fittings as per the directions of Engineer In-Charge Complete job including carriages upto site of work ( Kirlosker, Usha, Cromptom Greaves, Havelles or equivalent)

2

14000

28000

... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including all carriages

20

11533

230670

... More
Providing and placing on terrrace (at all floor levels) polyethene water storage tank ISI:12701 marked triple layer indicating the BIS License No with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and base support for tank (Sintex, Electroplat, Star, Lotus or equivalent having valid ISI license) including all carriages.

10000

8

87500



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.