Public Works Department Tender

Making plinth protection 50 mm thick of cement concret1:3:6(1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size over 75 mm bed of dry brick ballast 40 mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth including all carriage

Providing & laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1:1:2 (1 cement: 1 coarse sand: 2 graded stone aggregate 20mm nominal size) including all carriage

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars,piers, abutmen"ts, posts ans sturts, etc. upto floorfive level excluding cost of centring, shuttering,fmishing and reinforcement. (1 cement: 1 coarse sand : 2 graded crushed stone aggregate 20mm nominal size) including carriage

Centering and shuttering including strutting propping etc. and removal of form for :- (7.1) Foundations, footings, bases of columns etc for mass concrete

Walls ( any thickness ) including attached pilasters , butteresses , plinth and string course

Suspended floors, roofs, landings, balconies and access platforms.

Lintels, beams , plinth beams, girders, bressumers and cantilevers

Columns, Pillars, piers, abutments, posts and struts

Stairs ( excluding landings) excecpt spiral stair cases

Edges of slabs and breaks in floors and walls under 20cm wide

Reinforcement for RCC work including straightening , cutting, bending, placing in position and binding all complete TMT bars Including all carriage complete

Brick work with common burnt clay FPS ( non modular ) bricks of class designation 75 in foundation and plinth level in cement mortar 1:6 ( 1cement : 6 coarse sand . Including all carriage complete

Extra for brick work in super structure above plinth level lupto floor V level.

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled M.S . pressedButt hinges bright finishedof req size with necessary screws excluging panelling which will be paid for separately.all complete as per direction of Engineer In Charge. First Class Kail - Wood .First Class Kail - Wood .Second Class Deodar - Wood .

Providing and fixing 30 mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture1.4 mm in both directions with wire of dia 0.63 mm for doors , windows and clerestory windows including ISI marked M.S pressed butt hinges bright finished butt hinges of req. size with necessary screws.2nd class deodar wood

Providing wood work in frames of doors windows and clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or with dash fasteners shall be paid for separately).Second Class Deodar wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows (Area of opening forpanel inserts excluding portion inside grooves or rebatesto be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Second Class deodar wood.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc.includingwelding ,grinding, buffing, polishing and making curvature(wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing therailing with necessary accessories and stainless steeldash fasteners, stainless steel bolts etc. of required sizeon the top of the floor or the side of waist slab with suitablearrangement as per approval of Engineer-in-charge, (forpayment purpose only weight of stainless steel members shall be considered excluding fixing accessories suc as nuts, bolts, fasteners etc.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the anufacturer) with waterabsorption less than 0.08% and conforming to lS: 15622of approved make in all colours and shades, laid on 20mmthick cement mortar 1:4 (1 cement :4 coarse sand)including grouting the joints with white cement andmatching pigments etc. complete Size of tile 60x60cm

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position 2nd class deodar wood

Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws 1st Class kail wood

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA,or equivalent make in all colour, shades except begundy,bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarsesand) and jointing wtih grey cement slurry@ 3.3 kg persqm including pointing in white cement mixed with pigment of matching shade complete

Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 ofNITCO, ORIENT, KAJARIA, SOMANY or equivalent makein colour shades except White, Ivory, Grey, Fume Red,Brown laid on 20 mm thick bed of Cement Mortar 1: 4(1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complet

12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand) including all carriage

Providing and applying white cement based putty of average thickness 2 mm,of approved brand and manufacture,over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new wor

Finishing walls with water proofing cement paint of required shade:. .New work( Two or more coats) applied @ 3.84 kg/10 sqm

Applying priming coat : with ready mixed pink or grey primer of approved brand and manufacture on wood work ( hard and soft wood)

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats)

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchenplatform, vanity counters window sills facias and similarlocations of required size of approved shade, colour andtexture laid over 20 mm thick base cement mortar 1:4 (1cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edgeto give high gloss finish etc. complete at all levels. Raj Nager plain white marble/udhaypuri green marble/zebra black marble (Area of slab upto 0.5 sqm)

Structural steel welded in built up section, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, boltsand nuts 8mm diameter with bitumen and G.I limpet washersor with G.I. limpet washers filled with white lead and includinga coat of approved steel primer and two coats of approvedpaint on overlapping of sheets complete (upto any pitch nhorizontal/vertical or curved surface)excluding the cost ofpurlins, rafters and trusses and including cutting to size andshape whereever required. Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washersor with G.I. limpet washers filled with white lead and includinga coat of approved steel primer and two coats of approvedpaint on overlapping of sheets complete (upto any pitch horizontal/vertical or curved surface)excluding the cost ofpurlins, rafters and trusses and including cutting to size andshape whereever required. 0.63mm thick with zinc coating not less than 275gm/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts8mm dia G. I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2

Providing and fixing hardware anodised aluminium fittings including screwes complete (32.1)Sliding Tower bolt 300 x 16 mm

Tower bolt 200 x 10 mm

Tower bolt 150 x 10 mm

Handles 125 mm

Handles 100 mm

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansi ( Single socketed pipe 75 mm )

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised -PVC rain water pipes by means of50x50x50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1cement : 4 coarse sand) and making good the wall etc. complete ( Single socketed pipe 75 mm )

Providing and laying PVC pipe of Supreme made (35.1) 75 mm dia

100 mm dia