Pradhan Mantri Gram Sadak Yojana Tender

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. By Mechanical Means

Providing & applying Low Porosity primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface & spraying primer at the rate of (0.70 – 1.0) Kg/Sqmt. using mechanical means as per MORD technical Specification Clause 502.,including cost and carriage of material from source to site of work, with all leads, lifts, loading unloading and octori. (Finished work to be measured, complete)

Providing & laying Bituminous macadam, 50 mm thick, with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site including all leads,liftsf, laid over a previously prepared surface with paver finisher to the required grade, level & alignment and rolled to achieve the desired compaction as per MORD technical Specification Clause 504,including cost and carriage of material from source to site of work, with all leads, lifts, loading, unloading and octori. (Finished work to be measured, complete)

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 Kgs per Sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MORD technical specifications clause 503.,including cost and carriage of material from source to site of work, with all leads, lifts, loading unloading and octori. (Finished work to be measured, complete)

Providing, laying (by mechanical means) & rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates using bitumen (S-90) or emulsion, to required line, grade & level, to serve as wearing course on previously prepared base, including mixing in a suitable plant, laying with paver finisher and rolling with three wheel 80-100 KN static roller capacity, finished to required level and grades to be followed by seal coat of type B as per technical specification clause 508, including cost and carriage of meterial from source to site of work with all leads, lifts, loading, unloading and octrio.(Finished work to be measured.)

Providing and laying 6mm. seal coat ( by mechanical means) sealing the voids in a bituminious surface laid to the specified levels grade and cross fall using Type B, bitumen(S-90) as per MORD technical specification Clause 510. including cost and carriage of meterials from source to site of work, with all leads, lifts, loading unloading and octrio. (Finished work to be measured, complete)

Construction of sub grade and earthen shoulders with approved material obtained from barrow pits with all lifts and leads , transporting to site , spreading , grading to required slope and compacted to meet requirement of table 300.20. With a desired lead as per MORD technical specifications clause.303.1.including cost and carriage of material from approved source to site of work, with loading, unloading and octori. (Finished work to be measured, complete)

CC Drain

Earth work excavation in ordinary soil for foundations of structures upto desired width and depth as per drawing and MORD technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material, dressing of sides and bottom and back filling with excavated suitable material and disposal of surplus excavated material beyond the site premises.

Providing,Laying Ist class bedding on well compacted sand or approved granular material in foundation trenches as per clause 1105(ii) including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori. (Finished work to be measured, complete)

Providing concrete for plain/reinforced concretein (P.C.C grade M 10, in open foundations including formwork @ 4% of cost of labour component complete, as per drawings and technical specifications Clause 802, 803, 1202 & 1203, including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete) (Ref. MoRD Specification 800 & 1200.)

Providing concrete for plain/reinforced concrete (P.C.C grade M 15, in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203, including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete) (Ref. MoRD Specification 800 & 1200.)

Providing cement concrete flooring 50 mm thick in M-20 grade. as per drawings and technical specifications Clause 802, 803, 1202 & 1203, including cost and carriage of all materials from approved source to site of work, with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete)

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications clause 802, 803, 1202 and 1203 P.C.C grade M-25 nominal mix Including cost of form work and carriage of all materials from approved source to site of work with all leads, lifts, loading, unloading and octori.(Finished work to be measured)

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202. (Ref. MoRD Specification 1000 & 1200.) Including cost of form work and carriage of all materials from approved source to site of work with all leads, lifts, loading, unloading and octori.(Finished work to be measured)

Road Furniture

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Providing and fixing of PMGSY Maintaince Board as per drawing and detail of PMGSY

Providing and fixing of PMGSY LOGO Board as per drawing and detail of PMGSY

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on RCC Post 100 mm x 100 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

AMC for 1st Year

AMC for 2nd Year

AMC for 3rd Year

AMC for 4th Year

AMC for 5th Year

The Contractor has to quote the rates for Construction part without GST and GST @12% shall be added at the time of Allotment.