Military Engineer Services Tender

Construction of soakage well, of size 3.5m dia x 4.00m deep (internal dimension), brick construction complete all as spd and as shown on Drg No CE/AF/STD-15/2000 SHEET 1/2 & 2/2.

Sch 'A' Part-II (Site clearance and development works) Note: Prepriced at par with SSR Part-II (2020) at Serial Page No 21 and contractor has to quote the estimated amount under Col 6

Sch 'A' Part-III, Sec-I (Sewage Disposal Works) Note: Prepriced at par with SSR Part-II (2020) at Serial Page No 23 and contractor has to quote the estimated amount under Col 6

Sch 'A' Part-IV (INTERNAL ELECTRIC & HOT WATER SUPPLY WORKS) Note: Prepriced at par with SSR Part-II (2020) at Serial Page No 28(R) and contractor has to quote the estimated amount under Col 6

Sch 'A' Part-V, Sec-I (External Water Supply Works) Note: Prepriced at par with SSR Part-II (2020) at Serial Page No 30 and contractor has to quote the estimated amount under Col 6

Sch 'A' Part-V,Sec-II (External Water Supply Works) Note:- This schedule is not pre priced by MES and the pre priced rate indicated as "Rs.0.00" under Col 5 signifies this fact only.

Cutting the existing CI tubing of size 50 mm to 150 mm dia for addition /alteration,screwed /making threads in position including leakproof welding work to connection of 50 mm dia complete all as specified and directed.

Sch 'A' Part-VI, Sec-I (External Electrification Supply Works) Note: Prepriced at par with SSR Part-II (2020) at Serial Page No 33 and contractor has to quote the estimated amount under Col 6

Sch 'A' Part-VI,Sec-II (External Electrification Supply Works) Note:- This schedule is not pre priced by MES and the pre priced rate indicated as "Rs.0.00" under Col 5 signifies this fact only.

Material and labour for cutting of bitumen road/PCC road/hard standing for laying of GI pipe and passing of cable including making good to disturbed surface with PCC 1:4:8 and matching with existing surface complete all as specified.

Supply, installation, testing & commisioning in replacement of factory made (CPRI test certified manufacturer) LT feeder pillar box of suitable, outdoor type, floor mounted, double door, cubical compartmentalized type suitable for 415 volts, 3 phase, 4 wire, 50 Hz supply system all as specified and directed having busbar chamber with insulated aluminium busbar 100 Amps rating (100% neutral) installed on porcelain insulators. The panel shall be dust and vermin proof made of 3 mm (outer) & 2 mm (inner compartment door) CRCA sheet duly powder coated, panel mounted on angle iron 40x40x6 mm frame having 4 Nos legs 45 cm long of 40x40x6 mm angle iron, 15 cm grouted in PCC of ratio 1:2:4 and 30 cm clear space front ground level. Front & back opening type with aprons for cable entry with locking arrangement including internal wiring with PVC insulated multistranded copper conductor cables of suitable size, thimbling and cable entry boxes with cable glands. The scope of the work also includes supply and fixing the following:- INCOMING:- (a) MCCB 63 Amps,16 kA rupturing capacity, Ics=100%Icu ,4 pole, 415 volts, 50 Hz, Adjustable thermal Fixed magnetic release type - 01 No. (b ) Voltmeter digital type 0-500 Volts - 01 Nos (c) Ammeter digital type 0-100 Amps - 01 Nos (d) Indicating lamp (LED type) RYB - 01 Set of three OUTGOING:- (a) MCB SPN 40 Amps - 03 Nos Note: The rate of PCC on which panel is grouted is deemed to be inquoted rate by the contractor.

Sch 'A' Part-VII, Sec-I (Internal Water Supply Works and Plumbing Works) Note: Prepriced at par with SSR Part-II (2020) at Serial Page No 34(D) and contractor has to quote the estimated amount under Col 6

Sch 'A' Part-VII, Sec-I (Internal Water Supply Works and Plumbing Works) Note:- This schedule is not pre priced by MES and the pre priced rate indicated as "Rs.0.00" under Col 5 signifies this fact only.

S&F stainless steel chromium plated jet spray (butter fly or " L" bend) suitable for EWC including 1m tube and necessary nut bolts complete all as specified and as directed by Engineer-in-charge.

S&F brass chromium plated PEG SET 6 including fixing to 15mm bore pipe complete all as specified and as directed by Engineer-in-charge.