Military Engineer Services Tender

Lumpsum price worked out by the contractor for Internal Electrification Works as listed in Schedule 'A' Part-IV.

Lumpsum price worked out by the contractor for Hot Water Supply works as listed in Schedule 'A' Part-V.

Lumpsum price worked out by the contractor for Site clearance works as listed in Schedule 'A' Part-VI.

Lumpsum price worked out by the contractor for Road, Path & Hardstanding as listed in Schedule 'A' Part-VII.

Lumpsum price worked out by the contractor for Protective works as listed in Schedule 'A' Part-VIII.

Lumpsum price worked out by the contractor for Sewage Disposal works as listed in Schedule 'A' Part-IX.

Lumpsum price worked out by the contractor for Area Drainage works as listed in Schedule 'A' Part-X.

Lumpsum price worked out by the contractor for External water supply as listed in Schedule 'A' Part-XI.

Lumpsum price worked out by the contractor for RCC Security Wall as listed in Schedule 'A' Part-XII.

Lumpsum price worked out by the contractor for External Electrification as listed in Schedule 'A' Part-XIII.

Supply and fixing of DBOX x MCB Protected Socket with sheet steel Enclosure single pole 25 Amp with 3 pin plug to for AC connection from Socket point to stabilizer complete all as specified and as directed.

Supply and fixing surface /wall mounted batten LED luminair 20 watt 6500 K Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate including flexible copper conductoe cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and directed by Engr-in-Charge.

Supply and Fixing for LED Lamp 10 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white complete all as specified and directed by Engineer-in-Charge.

S & F High performance IP66 LED Streetligh 20 watt. Housing made of die-cast aluminium, with street optic lens, with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5 sqmm from ceiling rose, and 20W LED light etc. drawn through and including 32mm bore GI light grade protection pipe upto 1.0m length with suitable fixing accessories on walls, complete all as specified and directed

S & F VTPN Loading DBs are fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) Double Door 4 way suitable for 100MP MCCB incomer, IP 43 protection 415 V AC,50Hz AC complete all as specified and directed.

Supply and fix angle iron stand made out of 50 x 50 x6 mm angle iron and 50 x 6 mm flat suitable for stand for Cold water tank incl painting the stand with 2 coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply, fixing and laying Ductile Iron pipe with spigot & socketed ends centrifugally cast class K9, 150 MM dia bore ISI marked suitable for lead joint in any length laid in trenches complete all as specified and directed by Engr-in- Charge. (Excavation shall be measured and paid separately. Note:- The rate quoted for DI pipes includes for all jointing & jointing materials.

Supply, fixing and laying Ductile Iron pipe with spigot & socketed ends centrifugally cast class K7, 150 MM dia bore ISI marked suitable for lead joint in any length laid in trenches complete all as specified and directed by Engr-in- Charge. (Excavation shall be measured and paid separately. Note:- The rate quoted for DI pipes includes for all jointing & jointing materials.

Supply, fixing and laying Ductile Iron pipe with spigot & socketed ends centrifugally cast class K7, 100 MM dia bore ISI marked suitable for lead joint in any length laid in trenches complete all as specified and directed by Engr-in- Charge. (Excavation shall be measured and paid separately. Note:- The rate quoted for DI pipes includes for all jointing & jointing materials.

S & F of CI sluice valve flanged of size 150 mm bore class PN-1.6 ISI marked with stainless steel spindle and iron wheel head complete with rubber gaskets, nuts, bolts washers and packing materials etc completed all as specified and directed by Engr-in- Charge.

S & F of CI sluice valve flanged of size 150 mm bore class PN-1.0 ISI marked with stainless steel spindle and iron wheel head complete with rubber gaskets, nuts, bolts washers and packing materials etc completed all as specified and directed by Engr-in- Charge.

S & F of CI sluice valve flanged of size 100 mm bore class PN-1.0 ISI marked with stainless steel spindle and iron wheel head complete with rubber gaskets, nuts, bolts washers and packing materials etc completed all as specified and directed by Engr-in- Charge.

S & F of CI sluice valve flanged of size 80 mm bore class PN-1.0 ISI marked with stainless steel spindle and iron wheel head complete with rubber gaskets, nuts, bolts washers and packing materials etc completed all as specified and directed by Engr-in- Charge.

Construction of valve pit chamber of sizes 1.2 x 1.2 x 1.2 m with brick masonary one brick thick wall in cement mortar (1:4) on 100mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation complete including necessary exc and earthwork in any type of soil, formwork, 15 mm thick cement & plaster rendering internally all around over brick wk & externally upto 15cm below normal GL with 10 SWG thick MS sheet cover incl 40 x 40 x 6mm MS angle iron frame fixed with locking arrangement and painting with one coat of red oxide primer and two coats of black Bituminous paints complete all as specified and directed by Engr-in-Charge.

Construction of valve pit chamber of sizes 0.90 x 0.90 x 1.05 m with brick masonary one brick thick wall in cement mortar (1:4) on 100mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation complete including necessary exc and earthwork in any type of soil, formwork, 15 mm thick cement & plaster rendering internally all around over brick wk & externally upto 15cm below normal GL with 10 SWG thick MS sheet cover including 40 x 40 x 6mm MS angle frame fixed locking arrangement and painting with one coat of red oxide primer and two coats of black Bituminous paints complete all as specified and directed by Engr-in-Charge.

Construction of valve pit chamber of sizes 0.60 x 0.60 x 0.75 m with brick masonary one brick thick wall in cement mortar (1:4) on 100mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation complete including necessary exc and earthwork in any type of soil, formwork, 15 mm thick cement & plaster rendering iternally all around over brick wk & externally upto 15cm below normal GL with 10 SWG thick MS sheet cover including 40 x 40 x 6mm MS angle frame fixed with locking arrangement and painting with one coat of red oxide primer and two coats of black Bituminous paints complete all as specified and directed by Engr-in-Charge.

Supply and fixing for Barbed razer type concertina coil of 1050 mm dia (when unstretched) fixed between the existing ‘V’ shaped angle post and barbed wire over security wall/PCC/ground as per requirement with coil of coverage 7.5 running meter per coil, weight of each coil 14.00 to 14.50 Kg hot dip galavanized and binding with and including MS annealed wire of 0.90mm complete as specified and directed by Engr-in-Charge.

Providing & applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic t thermoplastic paint applicator machine fitted with profile shoe heater, driven by experienced operator on road surface incl cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc compete as per direction of Engr-in-Charge and accordanc with applicable specification complete all as specified and directed.

Solar cat eye having 3 LED/side of colour red/yellow to a side (6 Nos) house in tough pressure dia casted aluminium allow of size 125 x 125 x 125 mm with built in steam of suitable length for fixing with approxy LED solar cell battery and light sensor well protected in side under tough under cable for 2 to 3 days (night) after full charge in 8-10 hours make oscar or equivalent make as approved by Engr-in-Charge,complete all as specified and directed.

S & F Stainless steel round road delineator having reflector type red/yellow colour in plastic body protected in side polycarbonated sheet, protected with powder coated wiremesh cage system mouted as approved by Enge-in-Charge, complete all as specified and directed.

S& F Reflective type cat eye having colour red/yellow to a side, casted aluminium allow of size 100 x 100 x 20 mm with built in steam of suitable length for fixing with protected in side as approved by Engr-in-Charge,complete all as specified and directed.

S & F Information board with ACP sheet retroreflective writing one side size 600 x 900 mm. Made arround of reflective intensive tape dully fixed on angle iron frame 40 x 40 x 4 mm frame with aluminium sheet both side 2 mm thick as required with PCC 1:4:8 forpost and PCC 1:2:4 for plateforms size 5'x3' complete all as specified and directed by Engr-in-Charge.

Supply , Installation, connecting, commissioning and testing outdoor type IP-43, plinth mounted transformer powder coated capacity 400 KVA step down 11/0.433KV, outdoor type, copper wound 3 phase 4 wire 50c/s oil immersed naturally cooled with externally cooling tube, core type delta connected on primary (HV) 11 kv side and star connected on secondary(LV) 433V side having tapping ±2.5%, ±5%, ±7.5% and to change by means of hand operating off load tap changing gear on HV side including first filling of new transfomer oil of dielectric strength not less than 40KV with all fittings such as breather drain out valve, (oil tank) conservator tank of suitable capacity with oil level indicator, exhaust vent, temperature guage and accessories as per recommendation of OEM and all as per IS 1180 of 2014 complete all as specified.

Supply install, test and commissioning LT Feeder Pillar / Panel board cubical type outdoor Confirming to IS 8623 Part 1 1993, free floor standing / wall mounting factory fabricated made out of 3.15 mm thick CRCA sheet & suitable size to accomodate all accessories/fittings, compartmentalized in construction to accommodate incoming and outgoing ACB, MCCB, MCB and TPN Aluminum bus bars of rating not less 1.5 times the rated cap of incomer MCCB / ACB and outgoing feeder. The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator of size not less than 50 x 50 mm conical type at an interval of not more than 500 mm through out the length of the TPN bus bar . The incoming as well as outgoing MCCBs shall have copper extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. The extension links shall be supported on DMC / Epoxy insulators having provision for termination of incoming and out going cables. All extension links /interconnection shall be insulated with heat shrinkable colour coaded sleeves. The cubicle shall have a bottom channel of size 75x40 mm . A detachable predrilled gland plateof thickness not less than 3 mm thick should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front and back openable lockable /openable by key from both side and shall have louvers and air vent gasket for natural flow of air.3 mm XLPE adhesive type gasket shall be used to make panel weather, dust and vermin proof with IP65 degree of protection , complete as specified and consisting the following switchgears and accessories (Main Panel Board): (a) Main Incoming ACB Draw Out Type of Rating 630Amps Four Pole 50 kA - 01 No (b) Outgoing MCCB FP 415 Volt 350 Amps 36 kA - 01 Nos (c) Outgoing MCCB FP 415 Volt 250 Amps 36 kA - 01 Nos (d)Outgoing MCCB FP 415 Volt 63 Amps 25 kA - 01 Nos (e)Outgoing MCB TPN 415 Volt 25 Amps 16 kA -01 Nos (f) Outgoing MCB TPN 415 Volt 40 Amps 16 kA -02 Nos (g) Outgoing MCB TPN 415 Volt 16 Amps 10 ka -01 Nos (h) Street light timer switch up to 16 Amp single phase with astonomical on off in sheet poly carbonate/MS sheet enclosure (j) LED Type RYB Phase Indicator -01 Set (k) Digital VAFPF Meter -01 Nos (l) CTs - 01 Set

(m) TPN Aluminum bus bar with colour code 1500 APMS (n) Heat resistance sleeve (o) Bus bar support Epoxy 50 mm (p) Brass nut bolt washer 10x15mm (q) Sheet metal work including fabrication, PCC foundation etc (r) Complete wiring with copper cable, thimble etc. (s) Spare Compartments-05 Nos to accommodate Switchgear for Phase II Accn Note: (a) All CTs, PTs shall be as per the rating of the switchgear and of Cast resin type. (b) PCC foundation 0.60 mtr from GL for mounting of Panel is deemed to be included in the quoted rate for the job. (c) Danger Notice plate shall be provided on either facia of the panel. (d) SLD of pannel should be approved by GE before manufacture

All as per Sl Item No 37 herein before but with consisting following switchgears and accessories (Feeder Pillar No 1):- (a) Incoming MCCB FP 415 Volt 250 Amps 25 kA - 01 Nos (b) Outgoing MCCB FP 415 Volt 63 Amps 16 kA - 04 Nos (c) Outgoing MCB DP 240 Volt 25 Amps -01 Nos (d) Outgoing MCB DP 240 Volt 10 Amps - 02 Nos (e) LED Type RYB Phase Indicator -01 Set (f) Digital VAFPF Meter -01 Nos (g) CTs - 01 Set (h) TPN Aluminum bus bar with colour code 400 APMS (j) Heat resistance sleeve (k) Bus bar support Epoxy 50 mm (l) Brass nut bolt washer 10x15mm (m) Sheet metal work including fabrication, PCC foundation etc (n) Complete wiring with copper cable, thimble etc.

All as per Sl Item No 39 herein before but with consisting following switchgears and accessories (Feeder Pillar No 2): (a) Incoming MCCB FP 415 Volt 63 Amps 25 kA - 01 Nos (b) Outgoing MCCB FP 415 Volt 63 Amps 16 kA - 01 Nos (c) LED Type RYB Phase Indicator -01 Set (d) Digital VAFPF Meter -01 Nos (e) CTs - 01 Set (f) Elecrolytic Aluminium bus bar 200 Amps (g) Heat resistance sleeve (h) Bus bar support Epoxy 50 mm (j) Brass nut bolt washer 10x15mm (k) Sheet metal work including fabrication, PCC foundation etc (l) Complete wiring with copper cable, thimble etc.

All as per Sl Item No 40 herein before but with consisting following switchgears and accessories (Feeder Pillar No 3): (a) Incoming MCCB FP 415 Volt 63 Amps 25 kA - 01 Nos (b) Outgoing MCCB FP 415 Volt 25 Amps 16 kA - 01 Nos (c) Outgoing MCB DP 240 Volt 10 Amps 16 kA -04 Nos (d) Outgoing MCB DP 240 Volt 20 Amps 16 kA - 03 Nos (e) Street light timer switch up to 16 Amp single phase with astonomical on off in sheet poly carbonate/MS sheet enclosure (f) LED Type RYB Phase Indicator -01 Set (g) Digital VAFPF Meter -01 Nos (h) CTs - 01 Set (j) Elecrolytic Aluminium bus bar 200 Amps (k) Heat resistance sleeve (l) Bus bar support Epoxy 50 mm (m) Brass nut bolt washer 10x15mm (n) Sheet metal work including fabrication, PCC foundation etc (o) Complete wiring with copper cable, thimble etc.

M & L earthing complete with galvanised steel earth plate eletrode 600mmx600mm and 6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top prjgc, of the plate not less than 1.5m below normal ground level, connected to the Galvanise Iron earth lead 32mmx6mm (GI Strip) size, by means of bolts, nuts, check buts and washers of galvanised iron and 32mmx6 mm earth lead protected by provision of GI medium grade pipe 40 mm bore including provision of aggregates with 40 mm thick cover of RCC (1:2:4) , reinforced with XPM (weight not less than 4 kg per sqmm) and frame of angle iron 40mmx40mmx3mm and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe of suitable length for watering perforated at bottom placed on top edged of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning filling in distance not exceeding 50 mtr and removal of surplas soil to plate No 3 of SSR 2009 Part-I and connecting to feeder pillers and Transformer all as specified including testing on completion complete all as specified and directed.

Earthing complete with G.l earth plate electrode 60 cm x 60 cm and 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below GL) with top edge of the plate not less than 1.5 m below the normal ground level connecting to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth lead protected by provision of GI medium grade pipe 15mm bore including 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering of suitable length placed on top edge of earth plate, common salt and charcoal filling, with fixing arrangements, funnel, wire mesh and earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre complete all as per plate No 03 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion.

Supply and fixing security light luminaire LED fitting 60 watt including connection from junction box complete all as specifed and directed by Engr-In-Charge.

Supply and fixing security light luminaire LED fitting 35/36 watt including connection from junction box complete all as specifed and directed by Engr-In-Charge.

Bracket made of GI pipe 40 mm dia (light grade) with attachment of suitable size of MS clams for fixing street light, complete all as specifed and directed by Engr-In-Charge.

S & F Pole mounted junction box one piece fabricated out of 2mm thick MS sheet of size 300x200x100mm, front openable door with hinges, weather proof duly painted internally and externally over a coat of red oxide primer suitable to house and including colour coded 04 Nos aluminium bus bar of 63 Amps rating mounted on insulators, One No MCB SPN 6 Amps mounted on dinrail, internally wired with suitable size of copper conductor, provision of bottom cable entry with cable glands for connecting street light fittings. complete all as specifed and directed by Engr-In-Charge.

S & F Pole mounted junction box one piece fabricated out of 2mm thick MS sheet of size 300x200x100mm, front openable door with hinges, weather proof duly painted internally and externally over a coat of red oxide primer suitable to house and including colour coded 02 Nos aluminium bus bar of 63 Amps rating mounted on insulators, One No MCB SPN 6 Amps mounted on dinrail, internally wired with suitable size of copper conductor, provision of bottom cable entry with cable glands for connecting street light fittings. complete all as specifed and directed by Engr-In-Charge.

Supply and fixing copper cable multistrand PVC insulated PVC seathead 1.5 Sqmm 3 core complete all as specifed and directed by Engr-In-Charge.

S & F cable route indicator of size 100 mm x 100 mm x 5 mm thick GI plate with insertion there on bolted welded to 35 mm x 35 mm x 6 mm angle iron 60 cm long and fixing the same in ground with PCC as required for LT/HT calbe incl necessery earth work complete all as specifed and directed by Engr-In-Charge.

Supply, fixing and testing of water cooler electric driven single phase 230 Volts AC supply energy efficent star rated with CFC free refrigerant, INSITU PUF insulation, approximate storage capacity of 80 ltr and cooling capacity of 40 ltr per hour Make: Voltas/Blue Star/USHA.

Supply and fix Desert Cooler with steel body having 450 mm fan size with Aluminium blade ISI Marked electric driven (Single phase) having nominal air flow capacity 5000 CFM with wall thickness of sheet 1 mm and water tank and body pillar 3.00mm including prewired electirc control panel with immersed pump duly ISI marked pump and fan motor Make: symphony/Khaitan/Kenstar.

Supply and fix air cooled split unit air conditioner electric driven, single phase of capacity of 1.5 TR, BEE 5 star rated. Make: Voltas/Hitachi/Carrier.

Supply and install voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with out put voltage stablized at 230V with accuracy of +/_2.5 % and of capacity 03 KVA complete all as specified and directed.

Supply and install voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with out put voltage stablized at 230V with accuracy of +/_2.5 % and of capacity 01 KVA complete all as specified and directed.