Military Engineer Services Tender

M & L for 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc., fixed with L type of J type or cranked hook bolts (except sheets) (serviceable sheets obtained from dismantling items shall be used) complete all as specified and directed

Dismantling timber scantlings under 40 sqcm and over in section, as in fillets, rails, rafters, purlins etc unframed work complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, gypsum, POP, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

4mm thick Asbestos Cement plain building boards fixed to MS work/timber framework with screws complete all as specified and directed.

Providing and fixing of designer ceiling board of size 600 x 600x4mm thick pre-painted ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid system with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centres securely fixed to the structural soffits by approved hangers at 1200mm maxiumum centres. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of feach main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200 mm long cross tee (with double stitching) to be interlocked between main renders at 600mm to be supoorted independently. 600x600mm modules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, Permimeter wall angle shall be of 0.45mm thick GS sheet, complete all as specified and directed. (Make : Saint Gobain, Everest)

S & F 1.0 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 on one and pre painted on other side, including dismantling plain steel sheeting, any guage, thickness, complete all as specified and directed.

Dismantling AC Sheets of any description in roof covering including ridge, wind tie etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S & F rolled mild steel work in tubular trusses, purlins etc. including special shaped etc complete using ERW or induction butt welded tubes conforming to Gde St-240 and painted one shop coat of zinc chromate primer paint (including preparation of surface) at contractor's workshop before fabrication complete all as specified and directed.

Refixing and fabrication only rolled mild steel work in tubular trusses, purlins etc. including special shaped etc complete using ERW or induction butt welded tubes conforming to Gde St-240 and painted with one coat of zinc chromate primer paint (including preparation of surface) at contractor's workshop before fabrication complete all as specified and directed.

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws (for Ridge) complete all as specified and directed

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and directed

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 but (except bricks) complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 sqm complete all as specified and directed

S & F transparent fibre sheet glass 4 mm thick plain ordinary quality and fixing with white silicon using silicon fixing gun in square not exc. 0.5 sqm in each pane complete all as specified and directed

S & F in repairs wire netting of stainless steel wire 1.4mm dia and average 20mm fixed with tinned tacks of stainless steel wire staples complete all as specified and directed

Taking down existing unserviceable rolling shutters complete of any size and type complete all as specified and directed

S & F Steel rolling shutters without ball bearing with thickness of lathes 1.25mm including top cover anchoring rod, hasp and staple and one shop coat of primer and erected in position push, pull or manual type complete all as specified and directed

S & F in repairs steel ball bearing suitable for rolling shutters for smooth functioning of rolling shutter complete all as specified and directed

M & L for applying two coats of fire resistant paint over a coat of red oxide primer incl preparation of new steel surface complete all as specified and directed

Dismantling and breaking up old PVC drain pipes of 150 mm dia jointed in cement mortar and taking out of trenches and removing materials from site of work complete all as specified and directed

S & F 110 mm bore PVC (SWR) pipe single socketed in any length fixed to wall with rubber ring joint, ISI marked complete all as specified and directed

S & F in repairs 110 mm bore (any radius) PVC (SWR) bend , ISI marked complete all as specified and directed

M & L for one coat of fire resistant paint incl preparation of old steel surface complete all as specified and directed

M & L for running welding in repairs, Thickness of metal to be welded N exc 6mm, complete all as specified and as directed.

Taking down cement or cement lime plaster, ant description on brick or stone walls, etc. including racking out joints , hacking for key, scrubbing down with water, etc. complete all as specified and directed.

S & F 25mm aperture wire netting of galvanised steel wire 0.91mm dia fixed with tinned tacks of wire staples complete all as specified and directed

M & L rendering 15 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces finished fair and even (using water proofing compound) complete all as specified and directed. Note : WPC shall be measured and paid separately)

Supply only integral water proofing compound complete all as specified and directed.

M & L for preparation of new plasterd surface of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of 100% required shade (Company Depot tinted) in Camouflage pattern with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.50 litre/10 sqm over new surfaces complete all as specified and directed

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirting, drip moulds and similar work exc. 15 cm but not exc. 30 cm in widths or girth, including cutting to edges, all mitres and stopped ends etc., complete all as specified and directed

Demolition of cement concrete in ground floor, (unreinforced) and paving not exc. 15 cm thick (below or above GL) complete all as specified and directed

M & L for 100 mm thick PCC 1:2:4 type B 1 using 20 mm graded aggregate as in flooring, including finishing surface even and smooth without using extra cement in alternate bays complete all as specified and directed

M & L for 100 mm thick cement concrete 1:2:4 type B 1 (20 mm graded aggregate ) as in flooring, including finishing surface even and smooth without using extra cement including spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed

M & L for 75 mm thick cement concrete 1:3:6 type C 2 (40 mm graded aggregate ) as in plinth protection, finished even and smooth without using extra cement including forming joint to full depth at every 3.0 mtr interval and every change of direction and filled with mixture of bitumen and sand (1:3) by weight complete all as specified and directed