Military Engineer Services Tender

Note for item No. 1 to 3 : (a) Preparation of mix in hot mix plant, spreading by self propelling mechanical paver and rolling and compaction by set of rollers as specified in particular specifications shall be carried out. Hot mix plant may be installed at any distance but the contractor shall be responsible for maintaining the required temperature of mix under all conditions till it is laid and compacted. Unit rate against these items shall include for carrying out the works with deployment of these machinery for which nothing extra shall be payable and no delay in completion of work shall be acceptable on this account. (b) To achieve marshal stability of 1050 KN and all as per SSR Part-I Clause No. 20.B.4. (c) If qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs 60.00 Per Kg and if qty of binder contents is more than the qty as specified in respective items of BOQ no adjustment shall be made.

Applying evenly a priming / tack coat with paving bitumen @ 5 Kg per Ten Square Metre mechanical sprayer, complete, all as specified and as directed.

M&L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines,dashes,arrows etc and the like not exc 10 cms wide on road pavement with hot applied thermoplastic road marking paint of approved colour conforming to BS-3262 -1989 with special applicator machine all as per manufacturer instructions complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PMMA striplens reflector of model No. DA-972 fixed with and incl MS stud of suitable size as per manufactures instructions., complete all as specified and directed.

Solar cat eye aluminium alloy shall ( 100% water proofing design according to 65 ) of size 125mm x 125mm x 25mm ( shank 65mm ) of high efficiency Mono rystafie solar panel 2.4V / 0.3 watt one NI -ed rechargeable battery ( 1.2V / 1600MA ) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc. all as specified and directed.

Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

75mm thick (Compacted thickness) WBM with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) pf granite, trap or basalt spreading and compaction with 8 to 12 tonne power roller and consolidated to required gradient and camber complete all as specified and directed.

Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.

75mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base or pavings, complete all as specified and as directed.

Factory made machine pressed / vibro mechenically floated coloured interlocking cement paver block (glossy finish) ISI marked, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, with topping of cement with imported pigment. Shape shall be approved by Engr-in-Charge.

Sand cushioning under floors including watering and consolidation complete all as specified and as directed.

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.