Military Engineer Services Tender

Total amount of Sch 'A' Part-II (Internal electrification works) brought forward from srl page No-21

Schedule 'A' Part-III (Road/path/hardstanding/culverts Works)

Total amount of Sch 'A' Part-III(Road/path/hardstanding/culverts Works) brought forward from srl page No-22

Schedule 'A' Part-IV (Area drainage Works)

Total amount of Sch 'A' Part-IV(Area drainage Works) brought forward from srl page No-23

Schedule 'A' Part-V (Site clearance Works)

Total amount of Sch 'A' Part-V (Site clearance Works) brought forward from srl page No-24

Schedule 'A' Part-VI (Retaining Wall Works)

Total amount of Sch 'A' Part-VI (Retaining Wall Works) brought forward from srl page No-26

Schedule 'A' Part-VII (External electrification Works)

Total amount of Sch 'A' Part-VII(External electrification Works) brought forward from srl page No-28

Schedule 'A'Part-VII (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Supply and fixing , GI bracket pipe of size 40mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fittings and making the one end of GI pipe bracket suitable for fixing of street light fittings for any type and GI bracket pipe shall be fixed on wall/pole, steel/PCC surfaces by providing suitable MS iron 25x4mm clamps 2 nos of length as required at site to the bracket pipe and painting to MS clamps and fixing with necessary suitable nuts, bolts & washers complete all as specified and directed.

Supply installation, testing and commissioning of feeder piller box outdoor type Fabicrated of 3.15mm thick CRCA sheet dust and vemin proof powder coated CPRI Approved double door type independent cabin including Locking arrangement for each MCCBs, bus bar chamber enclosed complete suitable for operating on 415 volt 50 Hz AC supply internally wired with copper conductor/strip of adequate size from main incoming MCCB to bus bar and bus bar to outgoing MCCB/MCBs having legs 45cm made out of 65x65x6mm angle iron grouted on brick masonry platform up to 30cm cm. Brick masonry platform should be 60cm above the ground level, comprising the following:- (a) MCCB 63 Amps FP, 25KA 415 volts, 50Hz-01 No. (thermal and magnetic adjustable type) (b) MCB 40Amps, SPN 10 KA 240 volts, 50Hz-1 Nos (c) Digital voltmeter 415 volts with VSS-01 set, Digital, Ammeter 250 amp with CTs & ASS-01 set (d) LED phase indication lamps RYB-01 set (e) Aluminum bus bar TPN 100 Amps-01 set

M&L for preparation of new concrete surface and applying two coats of synthetic enamel paint of any shade over a priming paint of any shade over a priming paint plaster coat complete all as specified and directed by Engineer-in-charge.