Military Engineer Services Tender

INTERNAL ELECTRIFICATION WORKS Schedule 'A' (Part-II Section-II)

M & L for Modular point wiring for one light/one fan controlled by one switch with 1.5sqmm PVC insulated unsheathed multistrand copper conductor FRLSH cable with and including PVC concealed conduit ISI marked heavy duty for one light fan/bell point controlled by one switch including modular cover plate of suitable way matching with surrounding modular boxes with suitable size including PVC green insulated unsheathed 1.5 sqmm multistrand copper conductor FRLSH cable as continuous earth wire and connecting to earth duly, complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green)

-Ditto- all as per Item No 4.01 but modular call bell point

-Ditto all as per srl item No 4.01 here-in-before but MODULAR 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

-Ditto- all as per srl item No 4.01 here-in-before but MODULAR 3 pin 5 amps socket outlet on independent Board complete all as specified and directed

-Ditto-all as per srl item No 4.01 here-in-before but MODULAR 15/16 Amps socket outlet on independent board with 2.5 sqmm copper conductor FRLSH cable and 2.5 sqmm PVC insulated copper conductor cable FRLSH (Green Colour) as earth lead complete all as specified and directed.

-Ditto-all as per srl item No 4.01 MODULAR one light point controlled by two 2 way switches

-Ditto - all as per Srl item No. 4.01 here-in-before but using 4 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 15 Amps socket point including necessary running of 4 Sqmm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 7 5 W LED filament lamp complete with drivers, holders, x 7.5 W LED filament lamp LHFOAJD1TZ11060 9405 including connecting up with three core flexible copper conductor cable of suitable size complete

Decorative bed side lamp, brushed nickel finish fixture with acrylic diffuser suitable with complete with drivers, holders, 7.5 W LED filament lamp LHFOAJE1TN1I060 9405 1291.00 including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

Decorative, surface mounted conical shape fixture 7.5 W A60 LED Filament Lamp Black LHFXAGP1TN1K007 9405 drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

Supply and Install of the electric water heater storage 25 Ltr capacity 5 Star rated of Stainless-Steel body vertical type glass lined of inner tank and heating element and having the wall mounting arrangement, thermostat, indicators and thermally insulated stainless steel tank of glass lined inside the tank and heating element, PTMT connection pipe of 15mm dia and mounting on wall with suitable size of anchor bolts with complete connection of water & testing and all as specified and directed. Make Havells Puro Turbo DX/ Racold / Bajaj Calenta

LED smart Lamp, B22 type ,14 watt, complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (Earth pit not less than 2.25 metre deep below ground level ) with top edge of the plate not less than '1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as show in in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150 mm, 20mm bore Gl medium grade watering pipe, 15 mm bore light grade earth lead protection pipe up to main board, funnel with wire mesh, 40 mm thick RCC 1.2 4 type B-1 using 20mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including test on completion. (Note - The rate quoted include cost of min 7.5 metre earthing wire)

Distribution board iron clad vertical DB double door with IP-43 protection and mechanical strength as IK-09 suitable for MCCB as incomer an MCB as outgoing 415V 3Phase 50Hz 4 Way complete with appropriate size of copper bus bar and neutral link complete with one MCB TPN 4 Pole 415V 63 Amps rating, 16kA with adjustable thermal and adjustable magnetic release of the same make as of distribution board complete all as specified and directed

Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-III brought forward from serial page No. 28

Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule 'A' (Part-IV Section-I) brought forward from serial page No. 29

SEWAGE DISPOSAL WORKS Schedule 'A' (Part-IV Section-II)

M&L one set LLDPE septic tank any type of soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6MM plate embeded all arround/fiber reinforced cover with angle iron frame vent shaft and sludge chmber etc complete for 30 users complete all as specified and directed by Engr-in-Charge and show drg CESZ/TD-1080/2011.

Construction of soakage well (brick masonry) of 1.20m internal dia and 3.00m deep below inlet level including necessary earth work filling with brick bats of guage 40 to 60mm, SWG inlet pipe junction 150mm bore including all other relevant works, complete all as specified and shown on drawing CESZ/TD-1078/2011 sh 1/1

Lump sum price worked out by the contractor for ROAD/PATH WORKS as listed in Schedule 'A' Part-V brought forward from serial page No.30

Lump sum price worked out by the contractor for AREA DRAINAGE WORKS listed in Schedule 'A' Part-VI brought forward from serial page No. 31

Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS listed in Schedule 'A' Part-VII brought forward from serial page No.32

Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS listed in Schedule 'A' Part-VIII brought forward from serial page No. 33

Lump sum price worked out by the contractor for SITE DEVELOPMENT & EARTHWORK as listed in Schedule 'A' Part-IX brought forward from serial page No.34