Military Engineer Services Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date8 Nov 2024
Closing Date30 Nov 2024
Tender Amount₹ 45,55,000
Costs
EMD
₹ 91,100Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_682931_1Tender No
GEJM-55/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
M&L for 10 mm thick vitrified ceramic light shade tiles (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in cement mortar 1:4. complete all as specified and directed.
170
-
-
M&L for 10 mm thick vitrified ceramic light shade tiles (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
12
-
-
M&L for granite work 16 to 18 mm thick (table rubbed and polished) in steps, jambs , pillars, window cills , cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed
11
-
-
Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed.
1070
-
-
M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surface,surface finished even and smooth without using extra cement complete all as specified and directed.
600
-
-
M&L for rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all s specified and directed.
720
-
-
M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.
75
-
-
Taking down chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified directed.
26
-
-
Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n.exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified directed.
27
-
-
S&F pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick MS sheet for doors with double rebate including mild steel hinges (08 Nos) 100 mm long , medium weright and 25 mm x 3 mm flat iron (06 Nos) as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type B-1 including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed.
102
-
-
S&F pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick MS sheet for doors with single rebate including mild steel hinges 04 Nos), 100 mm long , medium weright and 25 mm x 3 mm flat iron (06 Nos) as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type B-1 including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed.
35
-
-
S&F factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars ,any numbers sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed .
44
-
-
M&L for 35mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed
50
-
-
S&F solid PVC door frame of size 50mm x47mm made out of 5mm bot side prelam PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to distributed surface of walls complete all as specified and directed
58
-
-
S&F factory made both side prelam solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail , lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of prelam PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed.
18
-
-
Demolition of ceement concrete of any discription and in any position not otherwise specifically provided for and removing the rubbish from the work site out side defence premises complete all as specified and directed.
5
-
-
M&L for reinforced cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies complete all as specified and directed.
1.5
-
-
M&L for mild steel TMT bars 6 to 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed .
220
-
-
M&L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete, complete all as specified and directed.
26
-
-
M&L for use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n.exc. 20cm wide for fair finished surfaces of concrete, complete all as specified & directed
18
-
-
S&F pressed steel cup board frame made out of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 B1 as in back filling to chowkats including butt hinges 100 mm long complete all as specified & directed.
12
-
-
S&F aluminium anodised barrel tower bolts, 150mm long of extruded section, fixed to doors with screws complete all as specified and directed.
32
-
-
S&F aluminium anodised , fabricated type handle 100mm size complete all as spcified and directed.
32
-
-
S&F aluminum alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminum alloy and fixed complete all as specified and directed.
44
-
-
S&F aluminium hanging floor door stopper,twin rubber stopper,size 100mm , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws complete all as specified and directed.
28
-
-
S&F in repair mild steel 200mm, ordinary rat tail rod pattern springs including roller and roller plate fixed with welding complete all as specified and directed
22
-
-
Demolition of brick work or stone/boulder masonry , built in cement mortar or cement lime mortar including all quoins, arches & pillars etc of any description and in any position and removing unserviceable material from work site to outside defence premises complete all as specified and directed
52
-
-
M&L for brick work with sub class 'B' bricks, using old size bricks, straight or curved on plan exceeding 6m mean radius , built in cement mortar 1:6 complete all as specified and directed
42
-
-
All as per Srl item No -31 here-in-before but except bricks complete all as specified and directed
5
-
-
M&L for brick work with old size sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed .
18
-
-
M&L for factory made box type steel windows, double shutter,outer frame made out ERW TUBE 'P section (60x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) openable shutters side hung including pintle hinges with two nos MS tower bolts 150mm size on each shutter, steel handle and stopper of 'Z' section as specified complete with sash bars dovetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/opening for cooler/AC where required steel windows will be double shutter (external glazed and internal wire gauzed) complete all as specified in Drg No CEPZ/TD-324/07 of sheet No 1/3 to 3/3 complete all as specified and directed. Note: - The quoted rate shall be deemed to include :-
(i) 04 Nos MS steel lugs of MS flat 20 x 5mm & 20 cm long over all welded to frames (ii) PCC block for embedding lugs.
6
-
-
M&L for framed work such as grills , gratings etc with ends of bars shouldered and /or riveted or forged into spikes , framed guard bars, barred iron doors, ladders, framed balusters: walk ways , railings frame work of water tanks and similar work confirming to Fe290, Gde E-165 complete all as specified and directed
200
-
-
M&L for 4 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with any type of beads in squares n. exc 0.5 sqm each pane complete all as specified and directed.
12
-
-
S&F galvanised mild steel wire cloth , 0.56 mm normal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.
20
-
-
S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge with stainless steel brackets near to ends with stainless steel finials at both ends and necessary fittings complete all as specified and directed.
40
-
-
S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .
6
-
-
S&F in repair aluminium bottom door seal with brushes of length 1.20 m and fixed with screws to door complete all as specified and directed.
6
-
-
S&F in repair bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle , screwed down, screwed for 15 mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.
18
-
-
S&F in repair angle valve with flange,cast copper alloy , fancy type, chromium plated, screwed down for high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and dircted.
44
-
-
S&F in repair two way angle valve with flange,cast copper alloy , fancy type, chromium plated, screwed down for high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and dircted.
8
-
-
S&F in repair 15mm dia stop valve , fancy type, cast copper alloy ,chromium plated, concealed type with long shank and cup, screwed both ends for iron pipe complete all as specified and directed.
6
-
-
S&F in repair pillar taps, chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed.
2
-
-
S&F in repair brass chromium plated tubular towel rail 20mm dia, D type , 600 mm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed.
10
-
-
S&F in repair brass chromium plated tubular towel ring of 150mm dia, fixed with CP brass screws including wooden/plastic beads complete all as specified and directed.
2
-
-
S&F in repair brass chromium plated towel hanger with minimum 06 hooks , fixed with CP brass screws including wooden/plastic beads complete all as specified and directed.
32
-
-
S&F in repair Chromium plated soap dish of size 160x160x90mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
10
-
-
S&F in repair sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass, shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
9
-
-
S&F in repair corner glass shelf of size 30cm with Chromium plated bracket guard and railing fixed with and including screws and wooden/plastic cleats complete all as specified and directed .
1
-
-
S&F in repair PVC connection 15 mm x 600 mm including PVC check nut at both ends complete all as specified and direced.
22
-
-
S&F in repair brass chromium plated shower rose 150 mm of square size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed.
9
-
-
S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed
14
-
-
S&F in repair sinks with drainage board, made of 1mm thick stainless steel,overall size of sink 915mm x 460mm with bowl size 410mm x 355mm x 200mm, plugs, washers, waste pipe , union, CP waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed
2
-
-
S&F in repair vitreous china wash hand basin, white, flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including cast iron brackets, brass chromium plated waste coupling 32mm bore, waste pipe PVC 32mm bore complete all as specified and directed
4
-
-
S&F in repair 10 litres PVC, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float 32mm PVC 'L' bend and handle including brackets complete all as specified and directed
10
-
-
S&F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rest, cast iron 'P' or 'S' trap of size 100mm, including provision of plain cement concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good the floors complete all a specified and directed
2
-
-
Taking up or down steel tubing of 15 mm bore pipe and connections,including cleaning for re-fixing or removal to store complete all as specified and as directed
145
-
-
Taking up or down steel tubing of 20 mm bore pipe and connections,including cleaning for re-fixing or removal to store complete all as specified and as directed
85
-
-
S&F Galvanised steel tubing, 15mm bore, medium grade with all fittings, fixed to wall/ceiling and laid in floors complete all as specified and directed
125
-
-
S&F Galvanised steel tubing, 20mm bore, medium grade with all fittings, fixed to wall/ceiling and laid in floors complete all as specified and directed
75
-
-
M&L for cutting (in brick walls) chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, Iintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting n.exc 10cm grith complete all as specified and driected.
110
-
-
S&F stainless steel lock grating plain/hole, 100mm dia including embeding in tiles with white cement complete all as specified and directed.
4
-
-
Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings and removing from site complete all as specified and directed
102
-
-
S&F UPVC (SWR) type B pipes, 110 mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
23
-
-
S&F UPVC (SWR) type B pipes, 75 mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
31
-
-
S&F UPVC (SWR) bends any radius, 75 mm bore complete all as specified and directed
6
-
-
S&F UPVC (SWR) bends with access door any radius, 75 mm bore complete all as specified and directed
6
-
-
S&F UPVC (SWR) bends any radius, 110 mm bore complete all as specified and directed
8
-
-
S&F in repair UPVC (SWR) floor trap plain with grating having diameter of outlet 75 mm including jointing with solvent cement to waste pipe, laid in cement concrete 1:2:4 type B-1 complete all as specified and directed.
12
-
-
M&L for plain cement concrete 1:2:4 ,type B1(using 12.5mm graded crushed stone aggregates)as in lintels upto 1.5m clear span, window or door cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings,side posts of precast jallies etc. including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed.
1
-
-
Demolition of cement concrete (un-reinforced) ground floor to 2nd floor and pavings n exc 15 cm thickness (below or above ground level) and removing the rubbish from the work site to out side defence premises complete all as specified and directed
50
-
-
M&L for Chequered cement concrete tiles 30cmx30cmx25mm thick, with grey cement and pigment, set ,jointed and pointed in neat cement slurry as in floors, laid over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed
20
-
-
M&L for 50mm thick PCC 1:3:6 , type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection, laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. surfaces finished even and fair including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .
80
-
-
M&L for 25mm thick plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregates) as in sub base/ levelling course of floors, finished even and fair complete all as specified and directed.
75
-
-
M&L for preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white washing complete all as specified and directed.
25
-
-
M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white washing complete all as specified and directed.
100
-
-
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over two coats of wall care putty 1 to 2 mm thick each and one coat of primer complete all as specified and directed.
500
-
-
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
350
-
-
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/grith exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified and directed.
165
-
-
M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description having width/grith exceeding 10 cm including preparation and necessary filling by chalk putty as and where required to make surface even and smooth complete all as specified and directed
192.4
-
-
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white in colour including connection pipe to union of flushing cistern, inlet and overflow pipes, connecting only to flushing cistern, anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat with cover, white in colour with mild steel chromium plated hinging and 'P' or 'S' trap device complete all as specified and directed
9
-
-
M&L for dismantling of water tank of capacity exc 250 ltrs but n. exc 1000 ltrs and removing complete all as specified and directed.
7
-
-
S&F Rotational moulded polyethlene water storage tanks of 500 litres capacity (cylindrical vertical with closed top) with plastic lid cover, triple layered, white hoisted and fixed in position including PTMT Ball valves high pressure with epoxy coated aluminum rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe including making connections complete all as specified and directed.
1
-
-
S&F Rotational moulded polyethlene water storage tanks of 1000 litres capacity (cylindrical vertical with closed top) with plastic lid cover, triple layered, white hoisted and fixed in position including PTMT Ball valves high pressure with epoxy coated aluminum rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe including making connections complete all as specified and directed.
6
-
-
Dismantiling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed
450
-
-
S&F Pre painted galvalume aluminium zinc coating (AZ-150 micron) GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .
430
-
-
S&F Pre painted galvalume aluminium zinc coating (AZ-150 micron) GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .
20
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
6
-
-
S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc confirmimg to Fe 290 (Gde E -165) complete all as specified and directed .
4500
-
-
S&F structural steel work in tubular poles/trusses including special shaped washer etc complete using ERW or incuction butt welded tubes conforming to I.S. 1161-1998 grade St -240 complete all as specified and directed .
300
-
-
Dismantling Wall and ceiling boards (fibre,pulp, insulation) or insulation boards/slabs/blankets, any thickness, including cover fillets etc complete all as specified & directed.
150
-
-
S&F GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 9 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed ..
150
-
-
S&F in repair Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings all as specified and directed . Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of wall
45
-
-
S&F aluminium powder coated (coating not less than 50 micron) door frame and door shutter, door frame of hollow section 101mm x 44.0mm x thickness not less than 1.53 mm & hollow section of stiles of glazed shutter 85mm x 44.45mm x thickness not less than 1.56mm having grooves for aluminium beading and top rail of hollow section 83.5mm x 44.45mm x thickness not less than 1.50mm, lock rail of hollow section 83.5mm x 44.45mm x thickness not less than 1.50mm and bottom rail of hollow section 83.5mm x 44.45mmx thickness not less than 1.50mm ,one derived handle 300mm long,100mm long butt hinges - 4 Nos , aluminium floor type hydraullic door closer, aluminium mortice lock 65mm 4 levers of Godrej pattern and rubber packing, aluminium beading complete all as specified and directed.
6
-
-
S&F Powder coated aluminum (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators,frame work & partitions including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately ) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS :1285, fixing with dash fasteners of required dia and size, including neccessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as specified and the directed .
30
-
-
M&L for aluminum powder coated (coating not less than 50 micron), sliding window, three track with stainless steel mosquito proofing with window style of section 44.4mmx44.5mmx 2.0mm thick and frame of section 101.60 x 44.45 mmx 1.20mm thickness including 4.0 mm thick coloured/tinted/frosted glass panes & stainless steel wire mesh of aperature 0.63mm & all necessary fittings and fixtures complete all as specified and directed.
8
-
-
S&F aluminum powder coated (coating not less than 50 micron) window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary glazing and locking arrangements anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified and directed
6.5
-
-
M&L for 5.5 mm thick, tinted sheet glass ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares exc 0.5 Sqm in each pane complete all as specified and directed.
4.5
-
-
S&F 4mm thick aluminium composite panel (coloured sheet) including necessary accessories for fitting complete all as specified and directed
2.2
-
-
Dismantling posts or struts (wood, steel or RCC) of any section, including taking out embedded portion in concrete, brick work etc and making good the disturbed ground complete all as specified and directed .
30
-
-
Excavating in post holes each not exc 0.50 cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exc 25cm and removing surplus soil to a distance not exc 50m and making good surface all as specified`and directed .
10
-
-
M&L for plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.
16.5
-
-
S&F mild steel ventilators ,fixed type with glazing bars including one shop coat of red oxide zinc chromate primer complete all as specified & directed
4.5
-
-
S&F aluminium anodised,fabricated type handle 125mm size complete all as spcified and directed.
54
-
-
S&F 100mm stainless steel butt hinges fixed with stainless steel screws complete all as specified and directed.
36
-
-
S&F aluminium anodised barrel tower bolts,200 mm long of extruded section, fixed to doors with screws complete all as specified and directed .
92
-
-
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed .
25.6
-
-
S&F 3mm thick, figured glass, pin head type, ordinary quality and glazing with oil putty or any type of beads in squares n.exc 0.5 sqm each pane complete all as specified and directed .
3
-
-
Roughening surfaces of old concrete floor or old plastered skirting by picking, sweeping clean and washing down with water to remove dust etc and brushing surface with neat cement slurry @ 3.0 kg of cement per sq. metre complete all as specified and directed .
55
-
-
S&F machine cut kota stone slab in flooring, treads of steps (one piece including rounding/ mouldings of edges of treads), 18-20 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing cutting and mirror polishing over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.
30
-
-
S&F machine cut kota stone slab in vertical surfaces, risers of steps (one piece including rounding/mouldings of edges of risers), 18-20 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing cutting and mirror polishing over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
25
-
-
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as complete all as specified and directed .
10
-
-
Dismantling by chiseling RCC members i.e columns, beams, parapet facias, chajjas, ceiling and like exposing without disturbing the reinforcement, making it rust free by sand blasting/or using chemical, apply a coat of rustolin to remove rust and applying acrylic polymer on old rusted reinforcement ,providing additional reinforcement by welding with existing reinforcement at places (as directed & wherever required) binding RCC 50mmx50mm (10mm gauge welded mesh) & tack, securing with clips/binding wire, welding & provision of guniting pressure 2.2 to 2.5Kg/Sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including four storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster with chicken wire mesh in cement mortar 1:4 with water proofing compound @3% by weight of cement and recron 3S as per manufacturer instructions, cleaning & removing of waste material etc and apply two coats of Dr fixit/pidilite/sika/Fosroc new coat ezee at interval of 8 hours cure for the surface complete all as specified and directed.
50
-
-
Complete removal of existing water proofing treatment of any description including under layer, taking down cement plaster any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust complete all as specified and directed.
360
-
-
M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in padding over roof, finished & laid to required slope complete all as specified and directed .
18
-
-
M&L for 15mm thick rendering in cement mortar 1:4 on concrete surfaces as in roof, finished even & fair and including mixing of water proofing compound complete all as specified and directed . Note:-WPC shall be measured and paid separately
360
-
-
M&L for water proofing treatment in the following sequences:-
(a) Applying 1st course of bituminous primer conforming to IS -3384 @ 0.4 Kg/Sqm cover the surface till the surface properly impregnated and insolvent oil primer evoporate completely (b) Applying 2nd coat of blown 85/25 graded bitumen confirming to IS 702 @ 1.2 Kg/sqm. (c) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric membrane 3 mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat complete all as specified and as directed . (d) Preparation of newly sufrace of APP Membrane and applying two coats of water based bituminious alumunium paint @ 200 ml per sqm etc complete all as specified and as directed (e) Polymeric membrane shall be inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing and sealed with paving bitumen including cutting of brick wall upto depth of 50 mm and finished with cement concrete 1:2:4 type B-0 .
(f) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer.
360
-
-
M&L for preparing surface of sunken floor and applying 75 mm thick (average thickness) PCC M 20 (nominal mix) using 12.5 mm graded crushed stone aggregates mixed with water proofng compound with laid to a slope of 1:40 towards spout on RCC slab and 15 mm thick plaster in cement mortar 1:3 mixed with water profing compound on vertical/horizontal faces when PCC is still green. After laying of pipes, 2 coats of polymeric based chemical shall be applied and tested by ponding. complete all as specified and directed
40
-
-
M&L for plain cement concrete 1:5:10 type E2 (using brick aggregates) as in sunkan filling (upto 2nd floor) and mass concrete complete all as specified and directed
3
-
-
M&L for steel water tubing of 40 mm bore,medium grade,galvanised, laid in sunken floors as spout complete all as specified and directed.
2.5
-
-
Supply only liquid water proofing compound.
10
-
-
S&F vitreous china counter wash basin, size 560x470x190mm, oval shape , white, to be fixed on counter/ RCC slab including chromium plated waste coupling, 32mm waste pipe,bottle trap complete all as specified & directed
8
-
-
S&F in repair brass chromium plated Centre hole Basin Mixer, swan neck type for mixing of hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed .
8
-
-
S&F in repair brass chromium plated wall mixer, 3 in 1,with provision of telephonic shower with connecting legs & flanges for mixing of hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed .
8
-
-
S&F UPVC (SWR) type B pipes, 110 mm bore, single socketed, in any length with rubber ring joints fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.
24
-
-
S&F UPVC (SWR) type B pipes, 75 mm bore, single socketed, in any length with rubber ring joints fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.
24
-
-
S&F in repair uPVC (SWR) multi floor trap, plain with grating having diameter of out let 75mm including jointing with solvent cement to waste pipe, fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
8
-
-
S&F UPVC (SWR) vent cowl 75 mm dia complete all as specified
4
-
-
S&F UPVC (SWR) vent cowl 110 mm dia complete all as specified
4
-
-
S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connectios and fixed in position complete all as specified and directed.
8
-
-
S&F UPVC (SWR), junction single, (single T) equal or unequal for 75mm bore, complete all as specified and as directed .
8
-
-
S&F UPVC (SWR), junction single, (single T) with access door equal or unequal for 75mm bore, complete all as specified and as directed .
4
-
-
S&F UPVC (SWR), junction single, (single T) with access door equal or unequal for 110mm bore, complete all as specified and as directed.
4
-
-
Supply and fixing, UPVC(SWR), bend with access door for 110 mm bore complete all as specified and as directed.
4
-
-
S&F in repair sinks , made of 1mm thick stainless steel,overall size of sink 590mm x 460mm with bowl size 540mm x 410mm x 230mm, plugs, washers, waste pipe , union, CP waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed
2
-
-
S&F in repair stainless steel plate rack of size 90x80x25 cm, made of 1.00 mm thick sheet fixed on wall with screws/fasterners copmplete all as specified and directed .
2
-
-
M&L for Preparation of old painted steel surfaces of any description,not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
30
-
-
M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
40
-
-
M&L complete removal of existing treatment on wall/ceilng, roof projections, including facia, cornices etc by scrapping with mechanical wall sander (having mechanical vacum mechanism) having RPM not less than 1500, sanding pad or 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labourer (up to 4th storey with necessary scaffolding) complete all as specified and directed
2050
-
-
M&L for waterproof cement based putty @ 1Kg (undiluted) per sqm, of average thickness 1 mm over the plastered/old painted surface of wall/ceiling (up to 4th storey with necessary sacffolding ) after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc, by skilled labourer as per following steps :-
(i) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 Kg putty per minute.
(ii) Apply the putty manually in double layer and finishing the surface even and smooth in level without any undulation.
(iii) Allow 6-8 hrs time to dry the putty surface.
2470
-
-
M&L for one coat of acrylic waterbased interior/exterior (wall/ceiling up to 4th storey with necessary scaffolding) grade primer@0.8ltr (undiluted)/10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed .
2470
-
-
M&L for preparing the putty surface by sanding paper and applying two coats of oil bound distemper on wall/ceiling (up to 4th storey with necessary scaffolding) using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed
1720
-
-
M&L for water based premium acrylic smooth exterior emulsion for approved colour (up to 4th sotrey with necessary scaffolding) with silicon additive excellent dirt pickup resistance with low (VOC) less than 50 Antifugal Anti Algai properties in two coat @ 1.79 litre (undiluted)/10 Sqr mtr diluted with water as per manufacturer instruction applied over priming surface with fully automatic airless spray machine of paint applicaion with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI . Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed
750
-
-
Taking down carefully existing aluminium/copper point wiring for light, fan, socket or power bell complete with fittings such as Switches, sockets, ceiling roses, holders, call bells etc & making good the disturbed surfaces of walls/ceiling, matching the colour with existing surface complete all as specified and directed.
Note : Rate for making good shall be deemed to be included in above item rate.
168
-
-
Taking down of unserviceable sub main wiring of any size complete all as specified and directed.
169
-
-
Taking down of unserviceable MCB DB, DP /TPN along with MCB's complete all as specified and directed.
9
-
-
Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLSH with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed conduit of suitable size with all accessories such as bend, reducers, MS hooks including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc including continuous earth wire of size 1.5 Sqmm PVC FRLSH stranded copper conductor unsheathed, insulated, stranded connected to common earth point dolly for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed . Note:- Proper colour coding is to be followed as per IS specifications.
110
-
-
All as per Srl item No 149 here-in-before but for one socket outlet, 3 Pin 5 Amps, 230 Volts on independent board complete all as specified and directed
24
-
-
All as per Srl item No.149 here-in-before but for one three pin socket outlet 5 Amp on the same board with other switches complete all as specified and directed
16
-
-
All as per Srl item No 149 here-in-before but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire complete all as specified and directed
18
-
-
S&F modular type switch, one way 6 Amps , 1 module complete all as specifieds and directed .
150
-
-
S&F modular type socket 3 pin, 6 Amps, 2 module complete all as specifieds and directed .
40
-
-
S&F modular type switch, one way, 16 Amps, 1 module complete all as specifieds and directed .
18
-
-
S&F modular type socket 3 pin, 6 A/16 Amps, 2 module complete all as specifieds and directed .
18
-
-
S&F modular type fan regulator, step down 120 Watt, 2 module complete all as specifieds and directed.
5
-
-
S&F ceiling rose, surface backelite, three terminal, 240 volts complete all as specifieds and directed .
62
-
-
S&F LED light fitting 1 x 18Watt, 220V, Integrated batten type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose with all fixing arrengenment complete all as specifieds and directed . . Note:- The LED batten and LED tube rod shall be of same make.
44
-
-
S&F lamp holder,PVC /Polycarbonate type with back plate for batten fittings complete all as specifieds and directed . .
24
-
-
S&F LED lamp of capacity 10 Watt suitable for B22 holder complete all as specifieds and directed . . .
24
-
-
S&F energy saving new generation 10W LED bulk head luminaire with opal diffuser, IP 65 and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 Hz complete all as specified and directed.
8
-
-
S&F LED luminaire 600 mm x 600mm, 35/36 watt, 220 V,AC, Recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed
16
-
-
S&F Sheet metal enclosure for DBs,TPN, double door,IP-43 protected, 230 Volts,4 ways with 100 amps rated copper bus bar complete all as specified and directed
1
-
-
S&F MCB SPN, 32 Amp, 240 Volts with rupturing capacity 10 KA, 'C' series, complete all as specifieds and directed .
4
-
-
S&F Sheet metal enclosure for DBs,SPN, double door,IP-43 protected, 230 Volts,8 ways with 100 amps rated copper bus bar complete all as specified and directed
4
-
-
S&F MCB TPN, 40 to 100 Amp, 415 Volts with rupturing capacity 10 KA, 'C' curve, complete all as specifieds and directed .
1
-
-
S&F MCB Single pole, 6 to 32 Amp, 240 Volts with rupturing capacity 10 KA, 'C' series, complete all as specifieds and directed .
30
-
-
Taking down existing ceiling fan of any size/sweep including oiling, greasing, cleaning and applying two coats of synthetic enamel paint after preparation of surface and refixing the same complete all as specified and directed .
5
-
-
S&F Submain wiring with two runs of single core PVC FRLSH unsheathed, insulated, copper cable of 4 Sqmm size, multi stranded, 1100 volts grade with PVC insulated,unsheathed FRLSH copper wire 4 Sqmm for continous earth wire drawn into and including concealed PVC conduit of suitable size complete all as specified and directed . Note :- Two runs of 4 Sqmm copper cable and one run of 4 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length)
89
-
-
S&F Submain wiring with two runs of single core PVC FRLSH unsheathed, insulated, copper cable of 6 Sqmm size, multi stranded, 1100 volts grade with PVC insulated,unsheathed FRLSH copper wire 6 Sqmm for continous earth wire drawn into and including concealed PVC conduit of suitable size complete all as specified and directed . Note :- Two runs of 6 Sqmm copper cable and one run of 6 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length)
80
-
-
S&F Sheet metal enclosure for DBs,SPN, double door,IP-43 protected, 230 Volts,2 ways with 100 amps rated copper bus bar complete all as specified and directed
4
-
-
S&F exhaust fan, steel body, AC single phase. 230 V of size 300 m sweep with, blades and frame and louvers, hanging on wall with 4 Nos steel fasterners 10mm dia & 100mm long including wall hole and making good the disturbed surfaces as per existing complete all as specified & directed
13
-
-
S&F electric water heater of capacity 25 litres,BEE 5 Star rated,storage type, steel body vertical type with glass lined /porcelain enamel coated steel inner tank and glass line double ceramic heating element upto 2 KW complete with all accessories such as safety valve,thermostate NRV,connection piece etc and fixing with 04 Nos nut bolt grouting in wall in PCC(1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed
2
-
-
S&F in replacement fancy type LED fitting 1 x 7 watts, E27 LED light, frosted glass with chrome finishing wall lamp fixture height 250mm complete all as specified and directed.
12
-
-
M&L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, precast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh ,15mm dia light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specifieds and directed ..
2
-
-
Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 50 Sqmm, 3.5 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete including taking out old cable & bricks all as specified and directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.
60
-
-
Excavation in trenches in any type of soil, not exceeding 1.5m deep and 1.5m wide for foundation etc or manholes, piers , shafts etc not exceeding 10 Sqm on plan & not exceeding 1.5m in depth and getting out complete all as specified and directed.
8.25
-
-
Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed
4.5
-
-
Removing excavated material to a distance n. exc 50m & depositing whrere directed at a level n exc 1.5 m above the starting point complete all as specified and directed.
3.75
-
-
M&L for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.
3.75
-
-
M&L for factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.
300
-
-
S&F Galvanised steeI tubing, light grade, 40mm bore, for cable protection, fixed to pole/wall with MS clamps, nuts, bolts etc or laid under floor/road/pavement complete all as specified and directed.
6
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%