Military Engineer Services Tender

Part-III (INTERNAL WATER SUPPLY): 'Lump sum price worked out by the contractor brought forward from serial page No. 25

Part-IV (PLUMBING WORK): 'Lump sum price worked out by the contractor brought forward from serial page No. 27 (R )

Part-V (SEWAGE DISPOSAL): 'Lump sum price worked out by the contractor brought forward from serial page No. 29

Part-VI (AREA DRAINAGE): 'Lump sum price worked out by the contractor brought forward from serial page No. 30

Part-VII (EXTERNAL ELECTRIFICATION): 'Lump sum price worked out by the contractor brought forward from serial page No. 32

Part-VIII (EXTERNAL WATER SUPPLY): 'Lump sum price worked out by the contractor brought forward from serial page No. 33

Part-IX (SITE CLEARANCE): 'Lump sum price worked out by the contractor brought forward from serial page No. 34

SCH 'A' Part-X (MISCELLANEOUS ITEMS): Total amount of Sch A Part-X (Miscellaneous Items) is not prepriced by MES and the Pre priced rates indicates as ₹ '0.00' under Col 6 signifies this fact only.

Supply and fix T Bulb Curve, 12 watt LED base B-22 connector, cool day light, complete all as specified and directed. Make:- Havells, Halonix, PHILIPS, HPL, BAJAJ or equivalent approved make.

Supply and fix LED tube light fitting, 20 watt, indoor decorative high lumen, batten including connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and directed. Make:- Havells, Halonix, PHILIPS, HPL, BAJAJ or equivalent approved make.

Supply and fix LED tube light fitting, 10 watt, indoor decorative high lumen, batten including connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and directed. Make:- Havells, Halonix, PHILIPS, HPL, BAJAJ or equivalent approved make.

Supply and fixing LED street light fitting 1 x60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, all as specified and directed. Make:- Havells, Halonix, PHILIPS, HPL, BAJAJ or equivalent approved make.

Supply and fixing on site LLDPE conventional type septic tank for 25 user, designed to carry sewage and sludge water, including all excavation in any type of soil, returning filling and removal of earth, PCC foundation 1:4:8, type D-2, Vent shaft, complete all as specified and directed. Make:- Sintex, Diplast, Polycon or equivalent as approved by Engineer-In-Charge.

M&L for Soakage wells of size 1.2 M dia X 3 M effective depth, excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M-25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats, complete all as specified and directed. (As per drg No CE/TD-1202/2003, Sheet 1/2)

S&F Junction box water proof out door type made out of SMC external dimensions 250 mm x 200 mm x 100 mm single door type hinged with locking arrangement front operated with one number MCB 06 Amps capacity for housing single phase and neutral bus bar, including connecting the incoming/out going cables including cable glands SMC coated clamps, nuts, bolts etc all as directed and fixed to the existing poles with mild steel flat of size 25 mm x 4 mm, complete all as specified and directed. Make: Sintex or technically and commercially equivalent models of Hensel/Universal switch gear control.

S&F of bracket made out of 40mm dia GI light grade tubing 1.5 metre long and bent to shape at 120 degree angle at one metre from bottom (as per sample), including M&L for MS clamps, back plates fabricated from structural steel section 50 x 6mm , including nuts, bolts, washers, welding cold or hot, drilling of holes for bolts, in any shape or size including two coats of Aluminium paint over a coat of Red oxide primer after preperation of steel surfaces for hoding of GI pipes with RCC wall, complete all as specified and directed.

Supply, fabricating, installation, testing, commissioning of outdoor LT feeder pillar box factory made CPRI approved with 3.15mm thickness of sheet, double door type opening at front and back of size 100x80×50 cm 415 volts porcelain insulators, made from angle of size 50x50×5mm frame,chamber of aluminium bus bar including04 Nos 200 Amp capacity insulated with coloured PVC sleeves, including lifting arrangement and legs duly spray painted internally and externally with two coats synthetic paint after a coat of primer grouted in PCC 1:3:6 type B-2 (40mm graded stone aggregate foundation) duly prewired with suitable size sigle core copper conductor cable PVC sheathed, thimbles, cable glands for incoming/outgoing cable etc complete all as directed by Engineer-in-Charge. (i) MCCB 4 pole 415 Volts of capacity 100 amps thermal magnetic release adjustable type of breaking capacity 16 KA-01 No (incoming). (ii) MCCB 4 pole 415 Volts of capacity 63 amps thermal magnetic release adjustable type of breaking capacity 16 KA-02 Nos (outgoing). (iv) MCB SPN 40 amps rating 10 KA-01 Nos (outgoing). (v) Voltmeter digital type, three phase 0-500 volts with inbuilt selector switch-01 No. (vi) Amp meter digital type, 0-200 amps with selector switch and CT’s of suitable ratio-01 No. (vii) Indicator lamps LED type (RYB) : 01 Set. (viii) Masonary work for installation of panel as required as per site. (ix) Three Phase Energy Meter- 01 Nos. (x) Change Over Switch 100 Amps -01 Nos.