Military Engineer Services Tender

All as per srl item No 2 above but for 3 pin 5 amps independent board complete all as specified and directed.

All as per srl item No 2 above but for 3 pin 5 amps on the same board with other switch complete all as specified and directed.

M & L for point wiring for one light/one fan controlled by one switch with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) with in and including PVC concealed conduit having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box and thickness not less than 2mm , including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash /colour wash to matching with the existing colour and all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)

S & F for switch piano flush type one way 5 amps SP complete all as specified and directed.

Supply and fix bell push flush type with indicator 6 Amps complete all as specified and directed.

S & F for switch piano flush type one way 15 amps SP complete all as specified and directed.

M & L for socket 2 in 1,3 pin, 6 and 16 Amp flush type universal complete all as specified and directed.

M & L for socket 2 in 1,3 pin, 6 Amp flush type universal complete all as specified and directed.

M & L for ceiling rose 65 x 50mm three terminals complete all as specified and directed.

Supply and fixing electronic bell ding-dong AC 230 Volts single pole complete all as specified and diercted.

Supply and fixing ceiling fan regulator electronic type 5 stage speed variation,socket type is size, ISI marked complete all as specified and directed.

S & F for lamp holder/batton holder/angle holder insulated body with back bakelite plate suitable for batten fittings complete all as specified and directed.

M & L for Inverter LED batten with square profile and polycarbonate channel,lithium Ion battery with charging time 8 hours to 10 hours and back up time upto 4 hours of capacity 20 watt 230 volt,complete with all accessories internally pre wired and including connecting up with three core twisted flexible copper conductor cable with suitable size mounting on rectangular PVC black complete all as specified and directed,

S&F LED Tube Light 20 watt LUMILINE Basic all purpose surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver. complete inicluding taking down old one complete all as specified and directed.

Supply & fixing LED Bulk head Sirius Series 10 W LED light .

S & F of sheet metal enclosures distribution boards, double door ,VTPN, 415 volts 4 ways (one incoming three phase & twelve out goings single phase )for MCCB & MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following a) MCCB FOUR POLE 100 AMPS AC 415 VOLTS 16 KA=01 NO (for incoming ) (b) MCB SP 63 amps = 04 Nos (for outgoings) complete all as specified and directed. ( Note :- (i)The DB shall be VTPN series. (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble properly crimped.(iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. (vi) cutting chasing shall be part of job at no extra cost .

Supply and fixing sheet metal enclousre for TPN DBs 4 way when MCB to be used double door powder coated factory made flush fixed complete with 200 amps rated bus bar 240 volts three pahse and neuton 4 way complete all as specified and directed,

Supply and fixing sheet metal enclousre for DBs when MCB to be used double door powder coated factory made flush fixed complete with 200 amps rated bus bar 240 volts single phase 12 ways complete all as specified and directed.

Supply and fixing sheet metal enclousre for DBs when MCB to be used double door powder coated factory made flush fixed complete with 200 amps rated bus bar 240 volts single phase 08 ways complete all as specified and directed.

Supply and fixing for MCB TPN 63 amps 240 Volt 'B' series complete all as specified and directed.

Supply and fixing for MCB SPN 63 amps 240 Volt 'B' series complete all as specified and directed.

Supply and fixing for MCB SPN 6 to 32 amps 240 Volt 'C' series complete all as specified and directed.

Supply and fixing for MCB SP 6 to 32 amps 240 Volt 'B' series complete all as specified and directed.

Taking down the unservicable /brunt sub main wiring from wooden batten and S & F for submain wiring in and including PVC conduit 1.8 mm thick ,25 mm dia with two run of PVC insulated, unsheathed multistranded copper conductor of 6 sqmm(FRLS) and one run of PVC insulated,unsheathed multistranded copper conductor 6 sqmm (green in colour) for earth continuity conductor and connected to common earth dolly with thimble etc, complete all as specified and directed. (Two run of 6 sqmm plus one run 6 sqmm of earth wire will be measured as 1RM) Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green).

Taking down the unservicable /burnt sub main wiring from wooden batten and Supply & fixing for submain wiring in and including PVC conduit 1.8 mm thick ,32 mm dia with two run of PVC insulated, unsheathed multistranded copper conductor of 10 sqmm(FRLS) and one run of PVC insulated,unsheathed multistranded copper conductor 10 sqmm (green in colour) for earth continuity conductor and connected to common earth dolly with thimble etc, complete all as specified and directed. (Two run of 10 sqmm plus one run 10 sqmm of earth wire will be measured as 1RM) Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green)

Earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15mm bore light grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as directed. Notes: 1. Earth lead & protection pipes length upto & including 7.50 metre is included in the quoted rate. 2. Soil should be free from stone, boulders, aggregate, gravels etc.

S & F in repair Recess mounting LED 2X2 luminaire light fitting complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of 1.5 Sq mm with suitable size of 36 watt complete as specified and directed.

S & F in repair surface mounting LED downlighter with white power coaled aluminium housing with integrated electronic driver 15 watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of 1.5 Sq mm with suitable size of 40/42 watt complete as specified and directed.

S & F in repair Round shape 18 watts 220 volts AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S & F of street light fitting made up of pressure die cast aluminium housing with IP65 protection of 35 watts LED Cool Daylight complete fitted on bldg with suitable dia of GI pipe medium grade 1.5 in length long with suitable size of 2 nos MS flat clamps FI 25 x 3 mm including nuts,bolts including connecting up with PVC copper conductor wire 1.5 sqmm s/c from security light to ceiling rose etc, complete all as specified and directed Note: (i) Contractor shall produce LM 79 & LM 80 test report form OEM owned NABL accredited laboraory. (ii) Contractor shall give gurantee of complete fitting/ fixtures for minimum of 2 years form the date of completion. (iii) Contractor shall conduct the inspection of company representative at site before installation of fittings/fixtures at no extra cost. (iv) Contractor shall arrange 70% material at site for approval of GE before incorporation in the work.

Supply and Replacement of MCCB 4 pole 440 volt 125 Amp rating capacity in 36 KA complete all as specified and directed.

Supply and Replacement of MCCB 4 pole 440 volt 160 Amp rating capacity in 36 KA complete all as specified and directed.

supply and fixing 1100 volts grade PVC insulated heavy duty armoured multistranded aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire,one twin core cable flat or circular 10sqmm 2 core, complete all as specified and directed.

Supply and fixing switch modular 6amps 230 volts one way switch.

S&F socket 6Amps AC 230 VOLTS 2/3 pin combined 2 modular type complete all as specified and directed.

S&F socket 6A/16Amps AC 230 VOLTS 2/3 pin combined 2 modular type complete all as specified and directed.

Supply and fixing switch modular 16amps AC 230 volts one way switch complete all as specified and directed.

Supply and fixing Modular white cover plate with frame 2 module and metal flush box 2 module complete all as specified and directed.

Supply and fixing socket modular 16amps AC 230 volts /3 pin combined 2 moule complete all as specified and directed.

Supply and fixing modular fan regulator step type120W-2module

Supply and fixing Modular white cover plate with frame 2 module and metal flush box 1/2 module complete all as specified and directed.

Supply and fixing Modular white cover plate with frame 3 module and metal flush box 3 module complete all as specified and directed.

Supply and fixing Modular white cover plate with frame 4 module and metal flush box 4 module complete all as specified and directed.

Supply and fixing Modular white cover plate with frame 6 module and metal flush box 6 module complete all as specified and directed.

Supply and fixing Modular white cover plate with frame 8 module and metal flush box 8 module complete all as specified and directed.

Supply and fixing modular Bell push 6amps 230 volts 1 module

Note :- The contract sum shall be arrived at after deduction of amount of sch of credit