Military Engineer Services Tender

Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' (Part-II Section-II)

S&F 2 way switch 5 Amp flush type complete all as specified and directed

S&F LED smart Lamp, B22 type ,14 watt, complete all as specified and directed

Supply and Install of the electric water heater storage 25 Ltr capacity 5 Star rated of Stainless-Steel body vertical type glass lined of inner tank and heating element and having the wall mounting arrangement, thermostat, indicators and thermally insulated stainless steel tank of glass lined inside the tank and heating element, PTMT connection pipe of 15mm dia and mounting on wall with suitable size of anchor bolts with complete connection of water & testing and all as specified and directed. Make Havells Puro Turbo DX/ Racold / Bajaj Calenta

S&F Distribution board iron clad vertical DB double door with IP-43 protection and mechanical strength as IK-09 suitable for MCCB as incomer an MCB as outgoing 415V 3Phase 50Hz 4 Way complete with appropriate size of copper bus bar and neutral link complete with one MCB TPN 4 Pole 415V 63 Amps rating, 16kA with adjustable thermal and adjustable magnetic release of the same make as of distribution board complete all as specified and directed

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (Earth pit not less than 2.25 metre deep below ground level ) with top edge of the plate not less than '1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as show in in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150 mm, 20mm bore Gl medium grade watering pipe, 15 mm bore light grade earth lead protection pipe up to main board, funnel with wire mesh, 40 mm thick RCC 1.2 4 type B-1 using 20mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including test on completion. (Note - The rate quoted include cost of min 7.5 metre earthing wire)

Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-III brought forward from serial page No. 29.

Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule 'A' (Part-IV Section-I) brought forward from serial page No. 30.

SEWAGE DISPOSAL WORKS Schedule 'A' (Part-IV Section-II)

M&L one set LLDPE septic tank any type of soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6MM plate embeded all arround/fiber reinforced cover with angle iron frame vent shaft and sludge chmber etc complete for 30 users complete all as specified and directed by Engr-in-Charge and show drg CESZ/TD-1080/2011.

Construction of soakage well (brick masonry) of 1.8m internal dia and 3.00m deep below inlet level including necessary earth work filling with brick bats of guage 40 to 60mm, SWG inlet pipe junction 150mm bore including all other relevant works, complete all as specified and shown on drawing CESZ/TD-1078/2011 sh 1/1

Lump sum price worked out by the contractor for ROAD/PATH WORKS as listed in Schedule 'A' Part-V brought forward from serial page No.31

Lump sum price worked out by the contractor for AREA DRAINAGE WORKS listed in Schedule 'A' Part-VI brought forward from serial page No. 32

Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS listed in Schedule 'A' Part-VII brought forward from serial page No. 33

Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS listed in Schedule 'A' Part-VIII brought forward from serial page No. 34

Lump sum price worked out by the contractor for SITE DEVELOPMENT & EARTHWORK as listed in Schedule 'A' Part-IX brought forward from serial page No.35