Military Engineer Services Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Military Engineer Services - MES Tender
Electrical and Electronics
Eprocure
Opening Date7 Feb 2024
Closing Date4 Mar 2024
Tender Amount₹ 49,00,000
Costs
EMD
₹ 98,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_641107_1Bid Award Id
ViewTender No
GEN-8579E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
S&F pressed steel frame for door with two rebate incl necessary fixing lugs,hings,lock strike plate complete al as specified of size 125x60mm. Complete all as specified and as directed.
80
-
-
S&F 2nd class hard wood, 40 mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitterd to chowkhets. Complete all as specified and as directed.
33
-
-
S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc with sash bars, edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) , supplied and fitted to chowkats etc Complete all as specified and as directed.
16
-
-
S & F Box type Steel windows/vent with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS complete all as specified and directed by Engr-in-Charge.
52
-
-
S & F Steel door including projecting type hinges, steel handle, complete,
with glazing bars, dovetailed or welded complete all as specified and as directed.
8
-
-
S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.
63.6
-
-
S & F factory made solid panel PVC door shutter with wood free EPS 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification. Complete all as specified and as directed.
15.34
-
-
S&F Steel ventilators with top hung shutter including hinges,steel pegstay complete all as specifid and directed
9
-
-
M & L for 3mm thick sheet glass, ordinary qaulity,in sqaures n exc 0.5 sqm Each panes etccomplete all as specified & directed
45
-
-
3mm thick pin head glass, ordinary qaulity,in sqaures n exc 0.5 sqm Each panes etccomplete all as specified & directed
5.5
-
-
S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etccomplete all as specified & directed
75.8
-
-
S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed. Complete all as specified and as directed.
72
-
-
S&F 100mm long aluminium anodised barrel tower bolt of extruded section and fixed. Complete all as specified and as directed.
40
-
-
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed Complete all as specified and as directed..
24
-
-
S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed. Complete all as specified and as directed.
114
-
-
S&F 75mm mild steel butt hinges, medium weight, cold rolled and fixed. Complete all as specified and as directed.
36
-
-
S&F 150mm long aluminium handles cast type, anodised and fitted. Complete all as specified and as directed.
72
-
-
S&F 100mm long aluminium handles cast type, anodised and fitted. Complete all as specified and as directed.
28
-
-
S&F 300mm long ordinary MS rat tail rod pattern springs incl roller and roller plate Complete all as specified and as directed.
18
-
-
M&L two coats of synathetic enamel paint over a coat of pink primer on new wood or wood surfaces, over 10 cms width or girth incl preparation of surfaces. Complete all as specified and as directed.
160
-
-
S&F in repair 20 mm bore harrison rails, mild steel, chromium plated with fixing brackets, stops, roller etc Complete all as specified and as directed.
100
-
-
Demolition of brickwork or stone buolder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed
6.3
-
-
Brick work with sub-class `B' bricks, straight or curved on plan with modular bricks exceeding 6 M mean radius built in cement mortar 1:6 Complete all as specified and as directed.
6.3
-
-
Taking down cement plaster on brick or stone walls, etc .including raking out joints, hacking for key, scrubing down with water etc Complete all as specified and as directed.
1740
-
-
M & L for rendering 5mm thick in cm (1:3) as in ceiling , soffit of chajja etc.complete all as specified & directed
230
-
-
M & L for preparing new plastered surfaces of ceiling chajjas facia etc. and applying three coats of white wash Complete all as specified and as directed.
230
-
-
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 without using extra cement complete all as specified & directed
810
-
-
M&L for rendering 15mm thick on unfair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified & directed
700
-
-
M & L for Preparing new plastered surfaces of wall and applying two coats of cement based paint Complete all as specified and as directed.
700
-
-
M & L for Preparing new plastered surfaces of wall and applying two coats of oil bound distemper over 3mm thick wall care puttyover a coat of chalk whitening preparatory to distempering on walls etc Complete all as specified and as directed.
810
-
-
M & L for Preparing old plastered surfaces of wall and applying one coat of cement based paint all as specified .
100
-
-
M & L for Preparing old plastered surfaces of wall and applying one coat of oil bound distemper etc Complete all as specified and as directed.
150
-
-
M & L for Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spots etc and applying one coat of white wash on walls after filling any hole with putty Complete all as specified and as directed.
50
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etccomplete all as specified & directed
688
-
-
Demolition of unreinforced cement concrete of any description and in any position Complete all as specified and as directed..
19.11
-
-
M & L for PCC 1:3:6 type C2 (75 mm thick as in plinth protection & finishing the surface even & fair W/o using extra cement complete all as specified and directed.
48
-
-
M & L for 25 mm thick PCC 1:2:4 type B-0 as a sub base to receive topping layer finished even and rough complete all as specified and as directed.
125
-
-
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and mixed with pigment to match the shade of the slab including rubbing and polishing Complete all as specified and as directed.
22
-
-
M&L for machine cut kota stone 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and mixed with pigment to match the shade of the slab includingrubbing and polishing Complete all as specified and as directed.
2
-
-
M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of Each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Complete all as specified and as directed.
393
-
-
M&L for non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of Each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm , in floors etc . Set and jointed in neat cement slurry and pointed in while or coloured cement to match etc complete all as specified & directed
65
-
-
M&L glazed, coloured, ceramic, tiles of size (450mm x 350 mm) x 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed.
230
-
-
M/L Cement concrete in ,sub base flooring, filling and mass concrete typeE2, 1:5:10 (using 40 mm graded granite stone aggregate) Complete all as specified and as directed.
18.75
-
-
M&L for Sand filling under floors or in foundations including watering and consolidation all as specified and as directed
7.5
-
-
M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and pigment, M-40 Grade etc complete all as specified & directed
150
-
-
M&L for 20mm thick screed bed or bedding in CM 1:4 layer of mortar for laying of floor finishes etc Complete all as specified and as directed..
15
-
-
M&L for screed bed or bedding layer of mortar 1:6 15mm thick for laying floor finishes etccomplete all as specified & directed
480
-
-
M&L for 10mm thick rendering in cement moratr 1:4 as in backing coat for skirting/dados etccomplete all as specified & directed
232
-
-
S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white, excluding flushing cistern & flush pipe Complete all as specified and as directed.
8
-
-
S&F in repairs, self cleaning water jet, chromium plated, (HEALTHFUSET)15 mm bore with all accessories complete suitable for EWC as approved Complete all as specified and as directed..
8
-
-
S& F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle including brackets (10 ltr) including mild steel tube 32mm dia flush pipe Complete all as specified and as directed..
8
-
-
S&F in repair vitreous china wash basin agle back, size 600x480 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified and as directed .
8
-
-
S&F in the wall soap dish, vitrious china white, approximate size 160x160x90 in repairs Complete all as specified and as directed.
8
-
-
Taking up or down 15mm bore steel tubing and connections,including cleaning for refixing or removal to store. Complete all as specified and as directed.
100
-
-
S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors. Complete all as specified and as directed.
100
-
-
M & L for Cutting chases, pinning in, making good to facing where rerquired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels,etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick walls
70
-
-
Taking up or down 20mm bore steel tubing and connections,including cleaning for refixing or removal to store. Complete all as specified and as directed.
65
-
-
S & F 20mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors Complete all as specified and as directed..
65
-
-
S & F in repair 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe Complete all as specified and as directed.
10
-
-
S & F in repair 15mm bore Bib taps, chromium plated fancy type with crutch or butterfly handle, screwed down screwed for brass ferrule and fixed. Complete all as specified and as directed.
26
-
-
S & F in repair 15 mm bore pillar taps fancy type cast copper alloy chrominium plated fancy typewith capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe Complete all as specified and as directed..
6
-
-
S&F in repair 15mm bore Stop valve fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed bath ends for iron pipe or fixed union and fixed.
36
-
-
S&F in repairs gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
8
-
-
S&F in repair Glass corner Shelf of 300mm long Complete all as specified and as directed.
8
-
-
M&L for 75mm dia cast iron Nahani Trap, with grating including jointing to waste pipe fixed in concrete type B1(1:2:4) Complete all as specified and as directed.
17
-
-
M&L for PVC SWR gully trap 125/110mm, setting and jointing with solvent cement with grating including jointing to waste pipe fixed in concrete type B1(1:2:4) Complete all as specified and as directed.
8
-
-
M & L for Grating doom round 140mm size of PTMT (minimum weight 50gms)Complete all as specified and as directed.
25
-
-
S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers Complete all as specified and as directed..
8
-
-
S&F in repairs brass chromium plated tubular towel rail,20mm dia, D type, 60cm long between flange Complete all as specified and as directed..
8
-
-
PVC connection 15mm size with PTMT nuts of length 600mm Complete all as specified and as directed.
16
-
-
Dismantling of water tanks and removing to store of capacity exc 250 Ltr & N exc 500 ltr etccomplete all as specified & directed
12
-
-
S&F 500 ltr capacity Rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in positioncomplete all as specified & directed
12
-
-
S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule Complete all as specified and as directed..
12
-
-
Dismantling wrought iron or mild steel works of any description not otherwise provided for Complete all as specified and as directed..
7
-
-
M & L for Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) complete all as specified and directed by Engineer-in-charge.
700
-
-
M & L for Preparing new steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide complete all as specified and directed.
63
-
-
M&L preparation of new steel and iron surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.
2
-
-
Preparing old steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
35
-
-
Demolition of cement concrete (unreinforced) as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.
17.64
-
-
M&L Providing, cement concrete 1:2:4 type B-0 (12.5mm graded aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges or as in padding concrete complete all as specified and as directed.
14
-
-
M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified
Note:- WPC shall be mesured and Paid for Separately.
280
-
-
Supply only for Integral water proofing compound. Complete all as specified and as directed.
154.12
-
-
M & L for Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces Complete all as specified and as directed.
280
-
-
M & L for Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm. Complete all as specified and as directed.
280
-
-
M & L for One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions
(ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions
(iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd). NOTE : S&F of APP based polimeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units asper relevent IS.
280
-
-
M & L for Applying one coat of aluminium paint on top of APP membrane.complete all as specified and directed by Engr-in-Charge
280
-
-
Removing old tarfelt or polythene film including taking down plaster of sunken floor , roughening and cleaning by brushing with wire brush to remove all dirt and apply a coat of cement slurry with 3.00 Kg of cement per sqm and Rendering 15mm thick in CM 1:3 using WPC finished rough (sunken floor/wall) and then applying two course treatment as follow :-(i) Applying bitumen primer @ 0.40Kg/Sqm
(ii) Laying APP (Atactic polypropylene) modified membrance 3mm thick and weighting not less than 3 Kg/Sqm with 100 GSM/Sqm non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap. The membrane has to be laid with LPG torch and over lap sealed and finished neat.
15
-
-
M & L for Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or ¼ section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 150mm dia of pipe completecomplete all as specified & directed
2
-
-
S&F in repair kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 915mm x 460mm x203mm, with bowl of size 405mm x 354mm x 203mm incl fixing cantilever brackets and connecting union to waste pipe complete all as specified and directed by Engr-in-Charge
7
-
-
S&F in repair Stainless steel plate rack made out of 0.63mm thick sheet wall mounted type with 5/6 partition of size 60 cms x 90 cms x 25 cm fixed on wooden gutties complete all as directed by Engr-in-Charge.
7
-
-
M & L for 62 cm wide Udaypur green stone 15 to 18 mm thick. (table rubbed and polished) as in cooking plateform of size not less than 2 m in length, incl cutting for sink over 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match complete all as specified and as directed.
16.99
-
-
S&F Cast Iron soil Waste and Vent pipe in any length with or without ears with cement joints laid in in floors/wall of 100mm bore all as specified complete all as specified and fixed in repair all as directed
52
-
-
All as per item 95 above but fixed to floor/wall of 75mm bore pipe
48
-
-
M & L for Bends ( any radius ) with duck foot or heal rest for 100 mm bore pipe fixed in repair including taking out old fittings complete all as specified & directed
13
-
-
All as per srl item No 97 above but 75mm bore pipe
12
-
-
M & L for CI branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type ) or with parallel branches for 100mm bore pipe fixed in repair including taking out old fitting complete all as directed with oval access door fixed in repairs.complete all as specified & directed
12
-
-
All as per item 99 above but 75mm bore pipe.
8
-
-
S&F 110mm dia PVC pipe single socketed in any length with rubber ring joints, fixed to walll and in trenches or in floors, fixed in repairs.complete all as specified & directed
72
-
-
S&F in repairs Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 100 mm borecomplete all as specified and directed.
36
-
-
S & F Factory made 18 mm thick celuka PVC ply of density 600kg/cbm for KICTHEN CABINETS and drawers including all Hettic fittings like Hydraulic channels, slowmotion hinges,Hydraulic shockers and 300 mm stainless steel handles as per site reqirements and manufacturer test certificate is required at the time of PAYMENT.
MAKE:- RAJSHRI PLASTIWOOD,ECOCEL BY ECHON.
NOTE:-1. WORK SHALL BE EXECUTED BY COMPANY REPRESENTIVES ONLY WITH GUARANTEE CERTIFICATE.
2.PVC ADHESIVE SHALL BE USED FOR PASTING THE PLY APPROVED BY MANUFACTURER
3. ONLY FRONT ELEVATION SHALL BE CONSIDERED FOR MEASUREMENT PURPOSE
12
-
-
M & L for Anodised aluminium window frame powder coated double rebated(16 gauge aluminium section ISI marked, weighing not less than 0.55 Kg/RM ,size of frame 100mm ) incl side hung /sliding glazed shutter and wire gauged window shutter, 5 mm thick tinted sheet glass selected quality of any colour, wire gauge ,hinges, necessary jointing cleat, glazing clips, rubber packing, aluminium handle etc, . and including opening of AC complete, including taking down old window of any type (Design/pattern of the frame as approved by Engineer in Charge all as specified and directed.)
10.25
-
-
Supply fabricate & fixing in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc including taking down or and making good of disturbed surface all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596)
(e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370).
10.8
-
-
SCHEDULE A PART II Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit all as specified and as directed by Engr-in-Charge
260
-
-
Taking down ceiling fan/Exhaust fan any sweep, removing blades ,cleaning the fan completely for dust and dirt, oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete, all as specified and directed by Engr-In-Charge.
29
-
-
Taking down existing energy meters, keeping aside safely & refixing the same in its original position after making functional & after completion of point wiring/sub main wiring, complete, all as specified and directed by Engr-In-Charge. Note:- Small items required for fixing the electric energy meter at site shall be provided by the contractor and cost for the same shall be deemed to be included in the quoted rates.
6
-
-
Taking down existing electric water heater, keeping aside safely & refixing the same to its original position after servicing of the whole geyser/making functional and after completion of wiring work, complete, all as specified and directed by Engr-In-Charge.
Note: If any part found unserviceable during the refixing of water heater at site shall be provided by the contractor and cost for the same shall be deemed to be included in the quoted rates.
6
-
-
M&L for Concealed Point wiring using FRLSH PVC insulated unsheathed multi strand copper conductor cable 1100 volt garde 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor earth wire drawnIN and including PVC conduit medium grade ISI marked not less than 20 mm dia concealed in wall & surface on ceiling with all conduit fittings etc terminated in and incl concealed pressed steel sunken box readily available ( having wall thickness not less than 1.22 mm upto 200 x 300 mm box size & having wall thickness not less than 1.63 mm beyond 200 x 300 mm ) duly covered with 3 mm thick bakelite sheet cover for fixing switches , sockets , fan regulators etc incl testing and making good to disturbed surface to match existing surface for one light/fan/bell point complete all as specified and directed.
171
-
-
All as per Srl item N0 110 above but for one socket out let 5Amp controlled by one switch on same board with other switch .
16
-
-
All as per Srl item N0 110 above for one socket out let 5 Amp controlled by one switch on independent board with other switch .
24
-
-
All as per Srl item N0 110 above but for One light point controlled by two, 2way switchs 5 Amp
6
-
-
All as per item No 110 here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board.
43
-
-
All as per item No 110 here in before but point wiring with 4 sqmm FRLS multi stranded copper conductor cable for main circuit and 4 sqmm cable as earth continuity conductor for controlled by two pin and earth plug and socket complete with one single pole MCB 20 amp 240V complete all as specified and directed.
2
-
-
S&F switch piano flush type 5 Amps single pole one way complete all as specified and directed.
43
-
-
S&F socket outlet 5 pin, 5 Amp flush type complete all as specified and directed.
4
-
-
S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.
12
-
-
S&F switch socket combination 2 in 1 5 pin 5 /15 Amps flush type complete all as specified and directed.
13
-
-
S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified.
156
-
-
S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified
30
-
-
S & F Modular socket 2/3 pin 5/6 Amps suitable for 2 Module complete all as specified.
36
-
-
S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified.
30
-
-
S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated boly complete all as specified and directed.
64
-
-
S & F Modular white cover plate incl Modular base frame for complete 8 module complete all as specified.
18
-
-
S & F Modular white cover plate incl Modular base frame for complete 6 module complete all as specified.
12
-
-
All as per Item No-126 above but 2 module complete all as specified.
6
-
-
All as per Item No-126 above but 3 module complete all as specified.
54
-
-
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specified and directed.
21
-
-
Supply and fixing LED lights fitting 1x 18 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
12
-
-
Supply and fixing LED lights fitting CRCA Channel 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
30
-
-
S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
48
-
-
S&F for LED bulb 7 watt complete all as specified and directed.
48
-
-
S&F Modular bell push piano type 5 Amps complete all as specified and directed.
6
-
-
S&F electric bell ding dong 230 volt AC complete all as specified and directed.
6
-
-
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed..
23
-
-
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
8
-
-
Supply & fixing heavy duty Metal body Exhaust fan 300 mm sweep single phase AC 230/240V complete with louvers complete all as specified and directed.
2
-
-
S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete all as specified and directed.
6
-
-
S&F MCB SPN 40 A to 63 A 10 KA 240 volts "C" series complete all as specified and directed.
12
-
-
S&F MCB single pole 5 to 32 Amps 10 KA 240 volts "C" series complete all as specified and directed.
72
-
-
S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link Vertical TPN 4 way suitable for MCCBas incomer, 100 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar including 100 A MCCB as incomer 16 KA complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking out of exsing UNSV DB with MCBs.(Note: MCCB 100 Amp 4 pole should be measured and paid seperately ) complete all as specified and directed.
1
-
-
S&F MCCB 100A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal setting complete.
1
-
-
S&F building security light luminaries eenergy saving and envirnment friendly long life LED light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistanve of IK07, including MS Bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and suitable size nuts, bolts and washers etc including taking down of existing light fitting complete all as specified and directed.
3
-
-
S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link TPN 4 way suitable for MCCBas incomer, 125 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down out of exsing UNSV DB with MCBs.complete all as specified and directed.
1
-
-
S&F MCCB 125A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal setting complete all as specified and directed.
1
-
-
M&L for sheet steel box fabricated out of 2 mm thick CRCA sheet powder coated of size 60x60x25 cm duly compartmentalized suitable to accommodate 4 Nos Energy Meter independently. Each compartment shall be provided with suitable door and 2 Nos fancy lock, complete, all as specified and directed by Engr-In-Charge incl taking out existing wooden meter box complete all as specified and directed..
2
-
-
M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 sq mm as earth continuity conductor connected to commen earth and earth dolly complete incl taking out existing UNSV service connections.complete all as specified and directed.
70
-
-
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete all as specified and directed.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements