Military Engineer Services Tender

Dismantling ceiling boards,fibre pulb insulation etc or insulation boards/slabs/blankets,any thickness, including cover and MS Tee grid,complete all as specified and as directed by Engr-in-charge

S&F false ceiling with Everest Fibre Cement Designer tile Ivory/white painted (High Pressure Steam Cured) of 4mm thickness (as per IS-14862) of size 595mmx595mm and any one of the design (occeanic , lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanised @120 gms, both sides inclusive) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0..30mm thick sheet and cross T of size 15x32mm made of 0.30mm sheet spaced between main T at 600mm c/c from a grid of 600x600mm and wall angle of size 15x20mm made of 0.30mm thick sheet and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers grils, light suspended from ceiling using GI soffit cleats fixed to existing rafters, purlin etc with dash fastners GI adjustable rods of 3mm dia wit galvanised butterfly level clips, spaced at 1200mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centre black pre-painted with polyester painnt and having a load bearingcapacity of 12 kg/sqm and refixed all exesting electric wiring and fixture all complete at all heights as per directed

S & F for 5mm thick lnsulated PVC Wall Lining honeycombed consisting of PVC Insulated Panels with approved colour and design printed PVC sheet used colour PVC sheet duly fitted into the wall including PVC sheet in strips feathered at the edges including removing and refixing electric switch boards & plates and covered with PVC stripes or beading after fixing wall panelling as per specifications Complete all as specified.

Demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and as directed by Engr-in-charge

M&L Brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified.

ditto but except bricks only complete all as specified and as directed by Engr-in-charge

Providing plain cement concrete 1:2:4, type B-0 using 12.5 mm graded crushed stone aggregates as in cills, steps, seismic and other similar bands, parapets and railings up to 60 cm in height, coping, kneelers, apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engr-in-charge

M&L for rendering 15 mm thick in cement mortor 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

M&L peparation of new surfaces and applying two coats of cement base paint on external wall surface over one coat of exterior primer and applying putty as required complete all as specified.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. of any size in section complete all as specified.

S&F Steel work in tubular Post/ trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed by Engr-in-charge

S & F of roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including Chequered plates and plain plastes of any thickness and distance pieces, cleats etc conforming to Fe-410- W(Gde-E-250) quality- B complete all as specified and directed

Preparation of steel surfaces of any description over 10cm width or girth not other wise describe, two coat of synthetic enamel paint and over one coat of red oxide primer complete all as specified and as directed by Engr-in-charge

Roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3.50 Kg/ sqm including 10mm thick plastering in CM (1:3) finished even and smooth mixed with water proofing compound and the sand used for the same will be clean and free from any silt, organic matter and impurities. RCC and plastered surface will be wet cured for minimum period laid down in IS 456 & then allowed to dry and leakage checked by pointed test atleast 72 hrs. After checking of leakages on dry surfaces applying bituminous primer on roof surfaces @ 0.40 kgs/sqm on plastered surface on sunny day. After the primed surface has dried and apply a coat of hot blown 85/25 penetration grade blown bitumen confirming to IS-702 @ 1.20 kg/sqm on the surface provided APP (Atactic Polypropylene polymer) modified polymeric five layered membrane with central core 100 micron high molecular high density film. Minimum weight of membrane will be 3.00kg /sqm. APP membrane will be laid across the slope from lowest line slopping roof towards ridge with minimum end lap of 150mm & side lap of 75mm bonded with hot blown bitumen. Over the membrane apply semi hot blown 85/25 penetration grade bitumen 1.2kg/sqm and blinded with fine sand in dry condition 0.5kg/sqm dusted over the bitumen coat complete all as specified. Note :- The laying of the membrane shall be got done by authorized applicator of the membrane manufacturer.

Supply only water prrofing compund complete all as specified and as directed by Engr-in-charge

Preparation of new surface and Applying two coat of Aluminium paint and over one coat of aluminium primer over bitumen membrane complete all as specified.

Demolition of plain cement concrete below or above ground level n exc 15 cm thickness and removal of soil to outside MD land complete all as specified and as directed by Engr-in-charge.

M&L 75mm thick Plain cement concrete 1:3:6 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring etc, complete all as specified and as directed by Engr-in-charge.

Demolition Stone slabs and tiles laid dry or dry beded or pointed of any description or thickness in floors, aprons etc complete all as specified and as directed by Engr-in-charge

M&L plain cement concrete tiles coloured designer interlocking paver of 60mm thick having glossy finish, colour and pattern as approved by Engr-in-charge strength not less than 350 Kg/Sqcm (tested as per IS 1237-1980) laid over and including 50mm thick dry river sand cushioning and voids filled with dry sand and surface compacted with surface vibrator complete all as per manufacturer instructions, specified and as directed by Engr-in-charge.

S&F factory made heavy duty full body digital matt finish, paving coloured tiles of size300mm x 300mm x 10mm thick for external use laid over and including 15mm thick screed bed or bedding layer in CM 1:4 including jointed with neat cement slurry and pointed in coloured tile epoxy grout to match the shade of tiles complete all as specified.

S&F in repair GI bend 15mm dia