Military Engineer Services Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Military Engineer Services - MES Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date22 Jan 2025
Closing Date12 Feb 2025
Tender Amount₹ 1,45,00,000
Costs
EMD
₹ 2,20,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_694354_1Tender No
CWE/JP-77/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Removing excavated surplus soils not exceeding 50 m and deposited where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
400
-
-
... More
Welding /cutting work for MS pipe of dia 80 to 150 mm to leaking pipe and replacing the pipe with new pipe of existing dia and welding the both side joints with required length of MS pipe to restore the water supply complete all as specified and as directed.
Note :- Rates are deemed to be including heiring of T&P required at site.
50
-
-
... More
Cast iron rising sluice valve both ends flanged class PN 1.6 conforming to IS-14846-2000 with iron wheel head and brass spindle including necessary joint with nuts bolt, washer, rubber or fiber board gasket, etc and testing complete all as specified and as directed. including taking down old one complete suitable for the following bore of pipes :-
-
-
-
... More
(a) 100 mm bore
10
-
-
... More
(b) 150 mm bore
20
-
-
... More
Cast iron non return valve both ends flanged and fixed to the existing pipe line including joint with nut bolt, washers, rubber or fiber board gasket, etc testing complete all as specified and as directed. including taking down old one complete suitable for the following bore of pipes :-
-
-
-
... More
(a) 100 mm bore
4
-
-
... More
(b) 150 mm bore
6
-
-
... More
Cast iron Double orifice Air release valve ISI marked IS 14845 type DS2 in PN 1.0 flanged ends with provision for inbuilt isolating valve to the existing pipe line including jointing with necessary fittings as required at site , testing complete all as specified and directed including taking down old one complete suitable for the following bore of pipes :-
-
-
-
... More
(a) 80 mm dia
4
-
-
... More
(b) 100 mm dia
8
-
-
... More
(c) 150 mm dia
4
-
-
... More
Repair/rectification of leakage of underground CI/DI pipe line of size 80 to 150 mm bore dia in position complete with excavation of size approximetaly 1.5X1.5X1.5 mtr around the leakage, returning filling in,removal,cutting/dismentaling of leakage complete with and including caulking of existing lead joint,filling new lead joint burning and taking out existing lead joint as per site requirement and restore the water supply.
Note: (Fitting replaced shall be measured and paid seperatly)
100
-
-
... More
Taking up CI/DI water mains (including all fittings) of dia 80 mm with spigot and socket ends with lead joints including burning out joints or flanged ends including disconnecting pipes and fittings complete all as specified and as directed.
300
-
-
... More
Taking up CI/DI water mains (including all fittings) of dia 100 mm with spigot and socket ends with lead joints including burning out joints or flanged ends including disconnecting pipes and fittings complete all as specified and as directed.
200
-
-
... More
Taking up CI/DI water mains (including all fittings) of dia 150 mm with spigot and socket ends with lead joints including burning out joints or flanged ends including disconnecting pipes and fittings complete all as specified and as directed.
200
-
-
... More
MS Black pipe flanged ends ISI marked conforming to IS 1239 PART -1 (2004) of 80 mm dia bore medium grade (B Class) with flanged joints at both ends as per site requirement in trenches,on ground or on the support above ground level by continuous welding joints 15mm thick flange joint , nuts & bolts and gaskets and testing complete, duly painted with two coats of bituminous paint externally complete all as specified and as directed.
300
-
-
... More
MS Black pipe flangd ends ISI marked conforming to IS 1239 PART -1 (2004) of 100 mm dia bore medium grade (B Class) with flanged joints at both ends as per site requirement in trenches,on ground or on the support above ground level by continuous welding joints 15mm thick flange joint , nuts & bolts and gaskets and testing complete, duly painted with two coats of bituminous paint externally complete all as specified and as directed.
200
-
-
... More
MS Black pipe flanged ends ISI marked conforming to IS 1239 PART -1 (2004) of 150 mm dia bore medium grade (B Class) with flanged joints at both ends as per site requirement in trenches,on ground or on the support above ground level by continuous welding joints 15mm thick flange joint , nuts & bolts and gaskets and testing complete, duly painted with two coats of bituminous paint externally complete all as specified and as directed.
200
-
-
... More
Replacement of tubing GI medium grade of size 80 mm dia with flanged ends and all fittings like nuts & bolts and gaskets laid in floor or borewells or trenches including taking out old UNSV pipe of size 80 mm dia complete all as specified and as directed.
400
-
-
... More
Replacement of tubing GI medium grade of size 100 mm dia with flanged ends and all fittings like nuts & bolts and gaskets laid in floor or borewells or trenches including taking out old UNSV pipe of size 100 mm dia complete all as specified and as directed.
300
-
-
... More
Tubing GI medium grade of size 150 mm dia with flanged ends and all fittings like nuts & bolts and gaskets laid in floor or borewells or trenches including taking out old UNSV pipe of size 150 mm dia complete all as specified and as directed.
300
-
-
... More
Mild Steel /CI/DI specials for spigot & socketed/flanged CI/DI pipes 150mm dia, such as bends(any type, radious and angle) Tapers any type (straight bends, increasing, decreasing or double socket etc) tee, pieces, single branches "Y" junction, double branches cross(all sockets or socket and spigot) collars, caps and plugs , including taking out old UNSV complete all as specified and as directed.
300
-
-
... More
Mild Steel /CI/DI specials for spigot & socketed/flanged CI/DI pipes 150mm dia, such as connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth, including taking out old UNSV specials etc. complete all as specified and as directed.
200
-
-
... More
Submersible motor rotor for 20 to 30 HP motor complete with bearing upper/lower bearing housing, sleeves, tee bolts and bush complete all as specified and as directed.
2
-
-
... More
Submersible motor stater for capacity 20 to 30 HP complete with thrust plate, thrust bearing with housing, studs, water seal, sand guard, rubber diaphragam with plate, sealing bush complete all as specified and as directed.
2
-
-
... More
Submersible motor rotor for 50 to 60 HP motor complete with bearing upper/lower bearing housing, sleeves, tee bolts and bush complete all as specified and as directed.
2
-
-
... More
Submersible motor stater for capacity 50 to 60 HP complete with thrust plate, thrust bearing with housing, studes, water seal, sand guard, rubber diaphragam with plate, sealing bush complete all as specified and as directed.
2
-
-
... More
Replacement of fully automatic star delta starter 3 phase, 415 volt, 50 Hz, suitable for submersible pumping set heavy duty with overload relay range suitable for 30 HP MU-G30 model L&T complete with provn of power contactor volt/Amp meter, push ON/OFF switch, selector switch, indicator etc complete all as specified and as directed.
2
-
-
... More
Replacement of fully automatic star delta starter 3 phase, 415 volt, 50 Hz, suitable for submersible pumping set heavy duty with overload relay range suitable for 40 HP MU-G40 model L&T complete with provn of power contactor volt/Amp meter, push ON/OFF switch, selector switch, indicator etc complete all as specified and as directed.
2
-
-
... More
Replacement of fully automatic star delta starter 3 phase, 415 volt, 50 Hz, suitable for submersible pumping set heavy duty with overload relay range suitable for 50 HP MU-G50 model L&T complete with provn of power contactor volt/Amp meter, push ON/OFF switch, selector switch, indicator etc complete all as specified and as directed.
2
-
-
... More
Replacement of fully automatic star delta starter 3 phase, 415 volt, 50 Hz, suitable for submersible pumping set heavy duty with overload relay range suitable for 75 HP MU-G75 model L&T complete with provn of power contactor volt/Amp meter, push ON/OFF switch, selector switch, indicator etc complete all as specified and as directed.
2
-
-
... More
Transporting air compressor and other allied equipment/material at site of tube well and installation of complete machinery for re-development of tube well complete all as specified and as directed.
3
-
-
... More
Re- development of tube well with air compressor of adequate capacity (not less than 250 Cfm) as per specification till the availability of sand free clear water, subject to minimum of 60 hrs of operation of air compressor (60 x 4500) complete all as specified and as directed.
3
-
-
... More
Providing of pea shaped gravel as per specification and gravel shrouding in annular space between well and liner assembly required during re-development complete all as specified and as directed.
3
-
-
... More
Disconnecting all incoming / outgoing electric connection from LT panel / starter / electric motor carefully including dismantling / opening nut, bolt of discharge head and taking out submersible / VT/ Monoblock motor pumping set complete with MS column pipe having capacity 10 to 50 HP and shifting in workshop for repair / servicing of pumping set and re-assembling / electric connection and testing at site on full load complete all as specified and as directed.
16
-
-
... More
LT Panel size (1.5 X 1.2 X 0.6 mtr) out door type having thickness of 3.15mm and inner shell made out of 2mm thick MS sheet and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 platform 45 cm above and 45 cm below the ground level, frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able by Keys having chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93, incl taking down of old unsv panels from site complete all as specified and as directed.
4
-
-
... More
Incoming :- (a) MCCB , 200 Amps, 4P, 415V,25KA - 01 Each, Al busbar of capacity 250 Amps - Set of three.
-
-
-
... More
Outgoing :- (a) MCCB , 100 Amps, 4P, 415V,16KA - 03 Each, (b) Automatic star delta starter 40 to 63 Amps with SPP,OV,UV,PR,etc.. - 02 Set (01 Standby).
-
-
-
... More
a) Digital Ammeter 0-250 A of size 96sqmm with selector switch-01 No.
Make -Schneider/Legrand/ABB/hager
-
-
-
... More
b) Digital Volt meter 0-500 V of size 96sqmm with selector switch-01 No
Make Schneider/Legrand/AE
-
-
-
... More
c) Indicator Lamp RYB 22.5mm dia LED type 240 volts AC with incoming includin back up protection by 2 Amp MCB RYB with holder-01 set of three. Make Schneider/Legrand/ABB
-
-
-
... More
d) CT Coils of suitable ratio -01 Set. Make -AE
-
-
-
... More
LT Panel size (1.5 X 1.2 X 0.6 mtr) out door type having thickness of 3.15mm and inner shell made out of 2mm thick MS sheet and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 platform 45 cm above and 45 cm below the ground level, frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able by Keys having chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93, incl taking down of old unsv panels from site complete all as specified and as directed.
4
-
-
... More
Incoming :- (a) MCCB , 250 Amps, 4P, 415V,25KA - 01 Each, Al busbar of capacity 315 Amps - Set of three.
-
-
-
... More
Outgoing :- (a) MCCB , 160 Amps, 4P, 415V,16KA - 03 Each, (b) Automatic star delta starter 63 to 100 Amps with SPP,OV,UV,PR,etc.. - 02 Set (01 Standby).
-
-
-
... More
a) Digital Ammeter 0-400 A of size 96sqmm with selector switch-01 No.
Make -Schneider/Legrand/ABB/hager
-
-
-
... More
b) Digital Volt meter 0-500 V of size 96sqmm with selector switch-01 No
-
-
-
... More
c) Indicator Lamp RYB 22.5mm dia LED type 240 volts AC with incoming includin back up protection by 2 Amp MCB RYB with holder-01 set of three. d) CT Coils of suitable ratio -01 Set.
-
-
-
... More
LT feeder piller box size (1.20X1.20X0.6 mtr) outdoor having thickness of 3.15mm and inner shell made out of 2mm thick MS sheet and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 platform 60 cm above and 45 cm below the ground level, frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able by Keys having chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI factory fabricated followed by powder coat painting with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93. Details of MCCB/MCBs are as follows :- Incomming :- (a) MCCB , 250 Amps, 4P, 415V,25KA - 01 Each, Al busbar of capacity 315 Amps - Set of three. Outgoing :- (b) MCCB , 100 Amps, 4P, 415V,10KA - 03 Each. (c) Digital Ammeter 0-400 A of size 96sqmm with selector switch-01 No. (d) Digital Volt meter 0-500 V of size 96sqmm with selector switch-01 No. (e) Indicator Lamp RYB 22.5mm dia LED type 240 volts AC (f) CT Coils of suitable ratio -01 Set complete all as specified and as directed.
4
-
-
... More
LT feeder piller box size (1.0X1.0X0.6 mtr) out door type having thickness of 3.15mm and inner shell made out of 2mm thick MS sheet and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 platform 60 cm above and 45 cm below the ground level, frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able by Keys having chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI factory fabricated followed by powder coat painting with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93. Details of MCCB/MCBs are as follows :- Incomming :- (a) MCCB , 160 Amps, 4P, 415V,16KA - 01 Each, Al busbar of capacity 200 Amps - Set of three. Outgoing :- (b) MCCB , 63 Amps, 4P, 415V,10KA - 03 Each. (c) Digital Ammeter 0-400 A of size 96sqmm with selector switch-01 No. (d) Digital Volt meter 0-500 V of size 96sqmm with selector switch-01 No. (e) Indicator Lamp RYB 22.5mm dia LED type 240 volts AC (f) CT Coils of suitable ratio -01 Set complete all as specified and as directed.
4
-
-
... More
MCCB TPN 400 Amps , 415 Volts, 36 KA ,4 POLE, Ics=100% Icu , overload adjustable short circuit adjustable type incl complete connection complete all as specified and as directed.
4
-
-
... More
MCCB TPN 250 Amps , 415 Volts, 25 KA ,4 POLE, Ics=100% Icu , overload adjustable short circuit adjustable type incl complete connection complete all as specified and as directed.
4
-
-
... More
MCCB TPN 200 Amps , 415 Volts, 25 KA ,4 POLE, Ics=100% Icu , overload adjustable short circuit adjustable type incl complete connection complete all as specified and as directed.
4
-
-
... More
MCCB TPN 160 Amps , 415 Volts, 16 KA ,4 POLE, Ics=100% Icu , overload adjustable short circuit fixed type incl complete connection complete all as specified and as directed.
4
-
-
... More
MCCB TPN 100 Amps , 415 Volts, 16 KA ,4 POLE, Ics=100% Icu , overload adjustable short circuit fixed type incl complete connection complete all as specified and as directed.
4
-
-
... More
PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate for coping of pole and stay assembly complete all as specified and as directed.
9.07
-
-
... More
PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate for stay assembly complete all as specified and as directed.
24.1
-
-
... More
PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate for pole foundation complete all as specified and as directed.
4.53
-
-
... More
Steel tubular swaged poles Erecting in truly vertical position 410 SP-55 (11.00 mtrs long) complete with 300 x300x 6 mm thick MS base plate continuously welded at bottom of pole and MS sheet 2 mm thick plug welded at top, bolts, nuts & screws including one shop coat of red oxide primer and internally bituminous painted including painting with two coats of aluminium paint and black and white strips 30 cm upto 1.5mtr height from top of coping in strips including taking out old/unserviceable poles complete all as specified and as directed.
12
-
-
... More
Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to GI strip 32 x 6 mm (up to 7.5 m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 40 mm dia light grade for protection of earth electrode 20 mm dia for watering and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and also removal of excavated soil not less than 50 mtr from the earthing place complete all as specified and as directed.
20
-
-
... More
Earthing complete with galvanized steel plate earth electrode 60cm x 60cm x 6mm thick buried in ground vertically to a depth not less than 1.5 mtr below normal ground level connected to galvanized iron wire of 4 mm dia earth lead by means of bolts nuts and washers made of galvanized iron protected by 40mm bore light grade GI pipe up 7.5 Rm with 4mm earth lead and connected for body earthing of feeder pillar box all as specified and including PCC (1:3:6) type C2 pit and precast RCC (1:11/2:3) type A1 pit cover slab of size 300x300x50mm with handle as shown in drawing funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal and salt in alternate layers including necessary earth work and excavation in hard/ dense soil and removal etc, complete all as specified and as directed. in electrical plate No 3 of SSR Part I 2009.
50
-
-
... More
Replacement of aluminium strip of size 25x3 mm with saddles and fixing screws on porcelain insulator/spacer fixed at every 1 mtr length as lightening conductor for lightening arresters on HT poles/Transformer incl necessary nut & bolts complete all as specified and as directed.
50
-
-
... More
Disconnecting & taking out defective underground cable any size and any type from trenches, pole, pipe, floor, wall etc complete all as specified and as directed.
1700
-
-
... More
Voltage stabilizer for automatic operation, three phase, copper wound, naturally oil cooled, outdoor type & designed for input variation between 300 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 30 KVA complete all as specified and as directed.
1
-
-
... More
Voltage stabilizer for automatic operation, three phase, copper wound, naturally oil cooled, outdoor type & designed for input variation between 300 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 50 KVA complete all as specified and as directed.
1
-
-
... More
BEE star rated ISI marked submersible pump set to IS 8034 : 2002 with Amdt No 1 (with upto date ammendments) suitable for bore size 200/300 mm,20 HP motor & pump set in 6 stage construction with radial or mixed flow impellers coupled with water filled squirrel cage induction motor 3 phase 415 volts stainless steel motor casing pump impellers made of bronze (material of main parts of pump set shall be as per clause 6.2 of IS 8034-2002 with upto date ammendments for use in borewells for handling clear water, 2900 rpm synchronous suitable for 415 volts +/- 6% 3 phase AC supply. The motor shall be provided with suitable size 3 mtr length PVC copper submersible cable flexible insulated and PVC sheathed 3 core flat type of ISI marked supplied by OEM including providing suitable MS clamp made from 10 mm thick MS plate of 50 mm width total length of MS clamp shall be 375 to 425 mm approx with suitable drill holes two nos on each side alongwith suitable nuts/bolts/washers etc as required at site complete all as specified and as directed.
1
-
-
... More
BEE star rated ISI marked submersible pump set to IS 8034 : 2002 with Amdt No 1 (with upto date ammendments) suitable for bore size 200/300 mm,20 HP motor & pump set in 10 stage construction with radial or mixed flow impellers coupled with water filled squirrel cage induction motor 3 phase 415 volts stainless steel motor casing pump impellers made of bronze (material of main parts of pump set shall be as per clause 6.2 of IS 8034-2002 with upto date ammendments for use in borewells for handling clear water, 2900 rpm synchronous suitable for 415 volts +/- 6% 3 phase AC supply. The motor shall be provided with suitable size 3 mtr length PVC copper submersible cable flexible insulated and PVC sheathed 3 core flat type of ISI marked supplied by OEM including providing suitable MS clamp made from 10 mm thick MS plate of 50 mm width total length of MS clamp shall be 375 to 425 mm approx with suitable drill holes two nos on each side alongwith suitable nuts/bolts/washers etc as required at site complete all as specified and as directed.
2
-
-
... More
BEE star rated ISI marked submersible pump set to IS 8034 : 2002 with Amdt No 1 (with upto date ammendments) suitable for bore size 200/300 mm,17.50 HP motor & pump set in 6 stage construction with radial or mixed flow impellers coupled with water filled squirrel cage induction motor 3 phase 415 volts stainless steel motor casing pump impellers made of bronze (material of main parts of pump set shall be as per clause 6.2 of IS 8034-2002 with upto date ammendments for use in borewells for handling clear water, 2900 rpm synchronous suitable for 415 volts +/- 6% 3 phase AC supply. The motor shall be provided with suitable size 3 mtr length PVC copper submersible cable flexible insulated and PVC sheathed 3 core flat type of ISI marked supplied by OEM including providing suitable MS clamp made from 10 mm thick MS plate of 50 mm width total length of MS clamp shall be 375 to 425 mm approx with suitable drill holes two nos on each side alongwith suitable nuts/bolts/washers etc as required at site complete all as specified and as directed.
1
-
-
... More
BEE star rated ISI marked submersible pump set to IS 8034 : 2002 with Amdt No 1 (with upto date ammendments) suitable for bore size 200/300 mm,12.50 HP motor & pump set in 6 stage construction with radial or mixed flow impellers coupled with water filled squirrel cage induction motor 3 phase 415 volts stainless steel motor casing pump impellers made of bronze (material of main parts of pump set shall be as per clause 6.2 of IS 8034-2002 with upto date ammendments for use in borewells for handling clear water, 2900 rpm synchronous suitable for 415 volts +/- 6% 3 phase AC supply. The motor shall be provided with suitable size 3 mtr length PVC copper submersible cable flexible insulated and PVC sheathed 3 core flat type of ISI marked supplied by OEM including providing suitable MS clamp made from 10 mm thick MS plate of 50 mm width total length of MS clamp shall be 375 to 425 mm approx with suitable drill holes two nos on each side alongwith suitable nuts/bolts/washers etc as required at site complete all as specified and as directed.
1
-
-
... More
BEE star rated ISI marked submersible pump set to IS 8034 : 2002 with Amdt No 1 (with upto date ammendments) suitable for bore size 200/300 mm,40 HP motor & pump set in 6 stage construction with radial or mixed flow impellers coupled with water filled squirrel cage induction motor 3 phase 415 volts stainless steel motor casing pump impellers made of bronze (material of main parts of pump set shall be as per clause 6.2 of IS 8034-2002 with upto date ammendments for use in borewells for handling clear water, 2900 rpm synchronous suitable for 415 volts +/- 6% 3 phase AC supply. The motor shall be provided with suitable size 3 mtr length PVC copper submersible cable flexible insulated and PVC sheathed 3 core flat type of ISI marked supplied by OEM including providing suitable MS clamp made from 10 mm thick MS plate of 50 mm width total length of MS clamp shall be 375 to 425 mm approx with suitable drill holes two nos on each side alongwith suitable nuts/bolts/washers etc as required at site complete all as specified and as directed.
1
-
-
... More
Un-reinforced precast concrete cable cover, class HVP, type 1 with pek size 300 mm x 180 mm x 40 mm complete all as specified and as directed.
3888
-
-
... More
Bricks common burnt clay sub class 'B' old size for cable protection complete all as specified and as directed.
24000
-
-
... More
Dry river sand laid in trenches as cable cushioning and covering all as directed.Sand cushioning to under ground electric cable 8cm before laying and 15cm after laying the cable intrenches complete all as specified and as directed.
299.7
-
-
... More
HT underground cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire aromoured electric power cables (heavy duty) with aluminium stranded condutor served with an inner sheathing of PVC tape armoured with galvanized steel strip and overall PVC sheathed 11000 volts grade (earthed) of cross sectional area of size 95 Sqmm 3 core incl taking down of old unsv cable from trenches complete all as specified and as directed.
530
-
-
... More
HT underground cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire aromoured electric power cables (heavy duty) with aluminium stranded condutor served with an inner sheathing of PVC tape armoured with galvanized steel strip and overall PVC sheathed 11000 volts grade (earthed) of cross sectional area of size 120 Sqmm 3 core incl taking down of old unsv cable from trenches complete all as specified and as directed.
270
-
-
... More
HT underground cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire aromoured electric power cables (heavy duty) with aluminium stranded condutor served with an inner sheathing of PVC tape armoured with galvanized steel strip and overall PVC sheathed 11000 volts grade (earthed) of cross sectional area of size 185 Sqmm 3 core incl taking down of old unsv cable from trenches complete all as specified and as directed.
100
-
-
... More
Replacement of Cable jointing end kit for 11000 Volts grade (E) cable outdoor termination heat shrinkable end type joint complete with jointing material suitable for 3 core XLPE armoured aluminium joint conductor cable of size 95 Sqmm and jointing materails for making joints and complete all as specified and as directed.
20
-
-
... More
Cable jointing end kit for 11000 Volts grade (E) cable outdoor termination heat shrinkable end type joint complete with jointing material suitable for 3 core XLPE armoured aluminium joint conductor cable of size 120 to 185 Sqmm and jointing materails for making joints and testing complete all as specified and as directed.
10
-
-
... More
Cable jointing end kit for 11000 Volts grade (E) cable outdoor termination heat shrinkable end type joint complete with jointing material suitable for 3 core XLPE armoured aluminium joint conductor cable of size 240 to 300 Sqmm and jointing materails for making joints and testing complete all as specified and as directed.
2
-
-
... More
Cable jointing kit for 11000 Volts grade (E) cable outdoor termination heat shrinkable straight through joint complete with jointing material suitable for 3 core XLPE armoured aluminium joint conductor cable of size 95 Sqmm and jointing materails for making joints and testing complete all as specified and as directed.
11
-
-
... More
Cable jointing kit for 11000 Volts grade (E) cable outdoor termination heat shrinkable straight through joint complete with jointing material suitable for 3 core XLPE armoured aluminium joint conductor cable of size 120 to 185 Sqmm and jointing materails for making joints and testing complete all as specified and as directed.
4
-
-
... More
Steel tubular swaged poles Erecting in truly vertical position 410 SP-55 (11.00 mtrs long) complete with 300 x300x 6 mm thick MS base plate continuously welded at bottom of pole and MS sheet 2 mm thick plug welded at top, bolts, nuts & screws including one shop coat of red oxide primer and internally bituminous painted including painting with two coats of aluminium paint and black and white strips 30 cm upto 1.5mtr height from top of coping in strips including taking out old/unserviceable poles complete all as specified and as directed.
12
-
-
... More
Replacement of lightning arrestor expulsion type complete with all fittings, transmission class, discharge capacity 65 kilo amp suitable for 11 KV complete all as specified and as directed.
10
-
-
... More
Replacement of lightning arresters station heavy duty metal oxide gap less complete with all fittings, transmission class, discharge and capacity are as per exist LA at yard & suitable for 33 KV complete all as specified and as directed.
1
-
-
... More
Replacement of 11 KV single phase in door PT of ratio 11 KV/rt 3/110V/rt 3/110V/rt 3 Class 0.5, Burden 50 VA – 50 VA insulation level 12 KV, complete all as specified and as directed.
1
-
-
... More
Replacement of 11 KV single phase in door Resin cast CT of ratio 400/5-5A class 1.0 – 5P10 burden 15VA – 15 VA insulation level 28 KV/75 KV as per IS-2705 complete all as specified and as directed.
2
-
-
... More
Replacement of 11 KV single phase in door Resin cast CT of ratio 200/5-5A class 1.0 – 5P10 burden 15VA – 15 VA insulation level 28 KV/75 KV as per IS-2705 complete all as specified and as directed.
2
-
-
... More
Replacement of GI pipe light grade 100 mm dia for road crossing along with pole/culvert /drainage for mechanical protection of cable complete all as specified and as directed.
80
-
-
... More
Replacement of GI pipe light grade 80 mm dia for road crossing along with pole/culvert /drainage for mechanical protection of cable complete all as specified and as directed.
80
-
-
... More
Replacement of danger notice board/plate of 1.6mm thick mild steel sheet , vitreous enameled white with letters, figures , and conventional skull and bone in signal red colour and fixed with MS clamps bolts approved size ofr HT 25cmx20 cm complete all as specified and as directed.
100
-
-
... More
HT OC/EF numerical protection relay for 11 KV VCB panel , 3 phase, ADR 131A, Make : Ashida, incl dismantling of old unsv protection relay and necessary setting of new relay with all connected tripping mechanism/power transformer control relays and submit necessary test report complete all as specified and as directed.
3
-
-
... More
Flag relay 30 volt DC, Model No AVAJH13-AM-011-03-01-05-00-00-00, Make Ashida as suitable in existing VCBs incl dismantling of old unsv relay complete all as specified and as directed.
4
-
-
... More
HT OC protection relay for 33/11 KV transformer control panel , 3 phase, In-1A/5A, fn : 50 Hz, Vx : 18-135 V DC, Model MIT103, Make : ERL, Genesis, incl dismantling of old unsv protection relay and necessary setting of new relay with all connected tripping mechanism/power transformer control relays and submit necessary test report complete all as specified and as directed.
2
-
-
... More
Steel tubular swaged poles exected in truly vertical position complete with cast iron base plate, finial taper plug, bolts,nuts and screws as specified type 410 SP 31 , 9 meter long including providing synthetic enamel aluminium paint over one coat of red oxide and black and white strips with synthetic enamel paint 30 cm each alternatively upto 1.5 mtr above the coping of pole starting with black strip complete all as specified and as directed.
30
-
-
... More
Disconnecting & taking out defective underground cable any size and any type from trenches, pole, pipe, floor, wall etc complete all as specified and as directed.
7560
-
-
... More
XLPE underground cable insulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 16 Sqmm 4.0 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc. complete all as specified and as directed. Note: (i) Earth work, sand, bricks , removing, returning filling Aluminium thimbles/lugs will be paid separately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates. (iii) All equipments , machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.
700
-
-
... More
All as per description Srl Item No 85 here in before but for 3.5 core 25 Sqmm. complete all as specified and as directed.
800
-
-
... More
All as per description Srl Item No 85 here in before but for 3.5 core 35 Sqmm complete all as specified and as directed.
1300
-
-
... More
All as per description Srl Item No 85 here in before but for 3.5 core 50 Sqmm complete all as specified and as directed.
1300
-
-
... More
All as per description Srl Item No 85 here in before but for 3.5 core 70 Sqmm.
1000
-
-
... More
All as per description Srl Item No 85 here in before but for 3.5 core 95 Sqmm complete all as specified and as directed.
1100
-
-
... More
All as per description Srl Item No 85 here in before but for 3.5 core 120 Sqmm complete all as specified and as directed.
500
-
-
... More
All as per description Srl Item No 85 here in before but for 3.5 core 150 Sqmm complete all as specified and as directed.
400
-
-
... More
All as per description Srl Item No 85 here in before but for 3.5 core 185 Sqmm complete all as specified and as directed.
460
-
-
... More
Replacement of LED street light fittings of 60 watt, suitable for upto 50 mm OD holder fixed on existing pole, system wattage and high preesure die cast aluminium housing with sealed toughened glass cover, silicon gasket for IP-66,TOP opening separate driver compartment with frame, suitable for pole mounting SMD led array with lense, cool white 6500 K, LED efficacy 120 lm/W and system efficacy 110 lm/W , 240 Volts AC, 50 Hz, CRI70% operating voltage range 160 V-270 V, Power factor 0.95, working temperature range -20ºC to 60ºC,built in surge protection more than 10kV with facility of power supply including dismentling old unserviceable street light fitting complete all as specified and as directed.
30
-
-
... More
Un-reinforced precast concrete cable cover, class HVP, type 1 with pek size 300 mm x 180 mm x 40 mm complete all as specified and as directed.
3888
-
-
... More
Bricks common burnt clay sub class 'B' old size for cable protection complete all as specified and as directed.
24000
-
-
... More
Dry river sand laid in trenches as cable cushioning and covering all as directed.Sand cushioning to under ground electric cable 8cm before laying and 15cm after laying the cable intrenches complete all as specified and as directed.
299.7
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%