Military Engineer Services Tender

18-20 mm thick single piece granite (of any type) work (table rubbed and polished) in steps, stair case, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and polishing over and including 20 mm thick screed bedding/ backing layer in CM 1:4, complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortor 1:4 complete all as specified and as direceted.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like peeple tree etc) scrubbing down with water complete, all as specified and as directed.

15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement, complete all as specified and as directed

Preparing newly plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of cement base primer, complete all as specified and as directed.

Dismantling timber fillets under 40 sq. cm in section, as in unframed work, complete all as specified and as directed.

Rolled mild steel in roof trusses (framed) , trussed , purlins,crane gantries , rails and fastening and heavy bracket framing ( beam, tee, angle, channel or flat section) including distance pieces conforming to Fe 410-W, Gde E-250 Quality 'A', complete all as specified and as directed.

Plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete, all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridges, all as directed complete all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

6mm ACP sheet prelaminated both side with decorative choice lamination with frame work, complete all as specified and as directed.

Complete removal of existing treatment of wall and preparation of surfaces incl rubbing and washing down and applying wall texture paint and finished (superfine/ domasco/ rustic type) over and incl two coats of wall care putty as per manufractures instruction, complete all as specified and as directed.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

75mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base to floor, complete all as specified and as directed.

Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

Machine pressed / vibro mechenically floated glossy finish interlocking cement paver block ISI marked, any shape and size conforming to IS 15658-2006 of 40mm thickness, M-40 Grade, with topping of cement mixed with imported pigment. Shape shall be approved by Engr-in-Charge.

Plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in steps, seismic and other similar bands, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, cills, lintels upto 1.50 metre clear span, copings etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works, complete, all as specified and directed.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/zink chrome primer complete, complete all as specified and as directed.

Preparation of new concrete surfaces apply two coats of synthetic enamel paint over a coat of priming paint coat, complete all as specified and as directed.

Point wiring with 1.5 Sqmm PVC insulated, unsheathed (FRLS) cable with multi stranded copper conductor wiring in and including PVC concealed conduit (ISI marked) 20mm dia and over, wall thickness not less than 2.00 mm thick and all accessories for one light / fan controlled by one switch with 1.25mm thick pressed GI terminal boxes (modular type) of required modules concealed on walls including inner and outer sheet for fixing of modular switches/socket/regulator etc along with PVC insulated and unsheathed FRLS 1.5 Sqmm multistrand copper conductor earth wire connected to common earth and earth dolly complete including cutting, chasing the surface and then making good the same in CM 1:3, complete all as specified & directed.

Modular switch single pole, one way, 5/6 Amps, 1 module, complete all as specified and as directed.

Ceiling rose, surface bakelite 65x 50mm three terminals fixed on PVC Round Block, complete all as specified and as directed.

S&F in replacement of focus light and aesthetic, polyster coated aluminium housed in ground/bush light, offers safe and bibrant parking areas, pathway and garden, with high illumination 8 watt, complete making all connections using 1.5 sqmm copper multi stranded two core flexible cable with flexible PVC pipe from ceiling rose to fittings, complete all as specified & directed.

S&F in replacement of LED Decorative wall light, gold finish fixture with white glass diffuser suitable for 9 Watt LED filament lamp E27 base including of 1 No of 9 W LED Lamp complete with internally prewired and connecting up with twin core flexible copper conductor cable of suitable size complete all as specified & directed.

Supply and fix in repair decorative LED gate light fitting of 30/40 watt , 240 volts diecast aluminum housing in pure polyster powder coated gray finish top maintainable product with opening die cast cover , anti corrossive stainless steel screws & silicon gasket HET PMMA diffuser IP65 protection driver duly prewired up to terminal on firms to IS 10322 part 5 / sec, 1:1987 suitable for pole of dia 40-75 mm in-built electronic driver complete including taking down old / unserviceable gate light fitting, complete all as specified and as directed.

MCB SPN DB IP 43 metalic Distribution Boards suitable for MCB as incomer, 6 way, 240 Volts AC, double door type of sheet steel phosphotised powder painted with 200 Amps, neutral bars earth bar concealed flush in wall fixed in replacement, complete all as specified and as directed.

MCB SPN, 40 Amps, 240 Volts, rupturing capacity 10 KA "C" Series including providing aluminuium thimbles for outgoing cable, complete all as specified and as directed.

MCB SP, 6 to 32 Amps,240 Volts, rupturing capacity 10 KA "C" Series including providing aluminuium thimbles for outgoing cable, complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground, (Earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to and including 4mm dia galvanized iron wire lead by means of bolts, nuts, check nuts and washers of galvanized standard iron or steel all as specified or indicated in electrical plate No 3 of MES Part-I, including testing on completion including the material and labour and taking out old unserviceable earthing of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI 20 mm nominal bore medium grade and copper lugs etc all as specified.

Srl item No 35 Contd … (e) 15 mm nominal bore light grade GI protection pipe 7.5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of earthing. Note : On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-Charge.

XLPE insulated sheathed armored heavy duty LT 1100 Volts grade cable with aluminum conductors laid in trenches/pipe, fixed to poles, walls of size 10 sqmm 2 core including taking up/down old unserviceable cables. complete all as specified and as directed.

GI tubing light grade 40mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles, complete all as specified and as directed.

Taking down carefully copper /aluminium, point wiring (light, fan, socket or power) complete including fittings and fixtures such as light fittings, switches, ceiling roses, pendants, regulators, sockets etc. and making good disturbed surfaces of wall, ceiling, floors etc, complete all as specified and as directed.

Taking down serviceable/unserviceable MCB DB/ AC's box including MCCB/MCBs of any size/rating, complete all as specified and as directed.