Military Engineer Services Tender

Schedule 'A' Part-III (Internal Electrification Work) carried forward from pre-priced Schedule.

Schedule 'A' Part-IV (INTERNAL WATER SUPPLY) carried forward from pre-priced Schedule.

Schedule 'A' Part-V (SEWAGE WORK) carried forward from pre-priced Schedule.

Schedule 'A' Part-VI (PLUMBING WORK) carried forward from pre-priced Schedule.

Schedule 'A' Part-VII (HARD STANDING WORK) carried forward from pre-priced Schedule.

Schedule 'A' Part-VIII (FENCING WORKS) carried forward from pre-priced Schedule.

Schedule 'A' Part-IX (ADDITON/ALTERATION WORKS) carried forward from pre-priced Schedule.

Schedule 'A' Part-X (External Electrification Work) carried forward from pre-priced Schedule.

Schedule 'A' Part-XI (Miscellaneous Items for B/R & E/M Rate Schedule) This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under Col. 5 signifies this fact only.

S&F for factory made steel windows conforming to IS-1038 with side hung shutters including box type hinges with 02 Nos MS 100 mm size barrel tower bolt for each leaf and Z section handle and steel peg stay, complete with glazing bars, dovetailed or welded incl one shop coat of red oxide zinc chromate primer complete all as specified and directed by Engr-in-charge.

S&F for factory made steel windows conforming to IS-1038 with side hung shutters including box type hinges with 02 Nos MS 100 mm size barrel tower bolt for each leaf and Z section handle and steel peg stay, complete without glazing bars, dovetailed or welded incl one shop coat of red oxide zinc chromate primer complete all as specified and directed by Engr-in-charge.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples, including and fixed necessary beading etc., incl applying one coat of light blue colour paint all as specified & directed.

S&F White cover plate with frame suitable for 1 module complete all as specified and directed by Engr-in-charge.

S&F White cover plate with frame suitable for 2 module complete all as specified and directed by Engr-in-charge.

S&F White cover plate with frame suitable for 3 module complete all as specified and directed by Engr-in-charge.

S&F White cover plate with frame suitable for 4 module complete all as specified and directed by Engr-in-charge.

S&F White cover plate with frame suitable for 6 module complete all as specified and directed by Engr-in-charge.

S&F White cover plate with frame suitable for 8 module complete all as specified and directed by Engr-in-charge.

S&F White cover plate with frame suitable for 12 module complete all as specified and directed by Engr-in-charge.

S&F White cover plate with frame suitable for 18 module complete all as specified and directed by Engr-in-charge.

S & F modular flush box for mounting of modular cover plates 1 or 2 modules complete all as specified and directed by Engr-in-charge.

S & F modular flush box for mounting of modular cover plates 3 modules complete all as specified and directed by Engr-in-charge.

S & F modular flush box for mounting of modular cover plates 4 modules complete all as specified and directed by Engr-in-charge.

S & F modular flush box for mounting of modular cover plates 6 modules complete all as specified and directed by Engr-in-charge.

S & F modular flush box for mounting of modular cover plates 8 modules complete all as specified and directed by Engr-in-charge.

S & F modular flush box for mounting of modular cover plates 12 modules complete all as specified and directed by Engr-in-charge.

S & F modular flush box for mounting of modular cover plates 18 modules complete all as specified and directed by Engr-in-charge.

Encolsure complete with 32 Amp Motor starter complete all as specified and directed by Engr-in-charge.

Supply and fixing distribution board iron clad TPN DB, double door with IP-43 1K-09 protection suitable for fixing of MCCB 4 pole 415 Volts 160 Amps rating as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar complete , including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge. (Note: MCB's and MCCB will be measured and paid seperately under relevent items)

Supply and fixing MCB SP 6 to 32 Amp, 240 volts, 50Hz, C series of breaking capacity 10 KA, complete all as specified and directed.

Supply and fixing MCB SPN 6 to 32 Amp, 240 volts, 50Hz, C series of breaking capacity 10 KA, complete all as specified and directed.

Supply and fixing MCCB TPN 160 Amps, 25 KA, Thermal megnatic released, adjustable type.

Supply and fixing ceiling fan 1200mm sweep complete with out fan regulator 230 volts (single phase) and provisioning of flexible copper cord of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan for giving connection complete all as specified and as directed by Engineer-in-Charge.

Supply, installation, testing and commissioning of tower type units in door/outdoor complete with cordless remote control unit and with in built Heating and Cooling arrangement and Digital Inverter twin rotary compressor, single phase units 220V - 240V, 50 Hz of capacity 2.0 Ton including necessary connection,complete all as specified and directed by Engr-in-charge.

S&F ultra slim LED panels with inbuilt driver in PVC body Premium aesthetics with stepped ring bezel.10W, 6000K, suitable for Ceiling cutout ø 125 mm, height 25 mm with drivers, flexible copper wire twin core, brass connectors and all accessories, complete all as specified and directed by Engineer-in-Charge

S&F ultra slim LED panels with inbuilt driver in PVC body Premium aesthetics with stepped ring bezel.15W, 6000K, suitable for Ceiling cutout ø125 mm, height 25 mm with drivers, flexible copper wire twin core, brass connectors and all accessories, complete all as specified and directed by Engineer-In-Charge.

S & F Decorative ultra slim square profile LED 20W, 6500K, lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack.suitable for 120 volts to 270 volts of system efficacy not less then 90 lumen/watt, with all accessories, pre-wired, including lamp and providing flexible copper wire, twin core cable complete all as specified and directed by Engineer-in-Charge.

S & F Flexible led strips in 24Watt in RGB colour, 10Mtr Length with Constant Voltage 12V, 3A Driver, remote control, suitable for uniform light distribution and long lasting adhesive for perfect cove lighting solution, complete all as specified and directed by Engineer-in-Charge.

S&F LED Step light 5W, complete all as specified and directed by Engineer-in-Charge.

S&F Decorative wall light, gold finish fixture with cognac hammered glass diffuser suitable for 7.5 W LED filament lamp complete all as specified and directed by Engineer-in-Charge.

Supply and fix LED post top lantern light fitting 25 watt complete all as specified and directed by Engineer-in-Charge.

S&F building security light LED 20W with mounting bracket made up of GI pipe light grade 32mm bent to shape, clamps and aceesories complete all as specified and directed by Engineer-in-Charge.

Taking down existing electrical cables of any size and capacity and shifing to new location and refixing with provison of new thimbles, clamps etc all as specified and as directed

Supply installation testing and commissioning of LT feeder pillar box (KIOSK) type totally enclosed made of CRCA sheet 3.15mm, outdoor type, CPRI Approved, powder coated, weather proof having sloping canopy with locking arrangement both side openable complete with and painting (factory made) of following.:- INCOMING (a) 4 pole MCCB 400 Amp, 50 Hz,415 V with rupturing capacity 36 KA-01No. OUTGOING: (a) 4 pole MCCB 260 Amp,50Hz,415V with rupturing capacity 36KA-03Nos. (b) 4 pole MCCB 160 Amp,50Hz,415V with rupturing capacity 36KA-03Nos. (c) Busbar aluminium 700 Amps with air insulated for TPN-one set. (d) Indicator lamp LED type-3Nos. (e) 3 Phase Energy meter (KWH Meter) single dual source meter (4040 series) for energy monitoring of Electricity Board (EB) and DG sets. showing parameters V, A, F, kW, KVA, PF, On hours, kWh (EB and DG), Accuracy class 1 as per IEC 62053-21 & class 0.5 as per 62053-22, 0 to 250A (f) Digital voltmeter and ammeter with CTs and PTs (g) Panel wiring with 2.5 sqmm copper cable PVC single core-Each Job (h) PCC platform with foundation in PCC 1:2:4 = Each Job (j) Change over switch 400 Amp 01 No (k) MCB TPN 63 Amp 03 Nos

Supply installation testing and commissioning of LT feeder pillar box (KIOSK) type totally enclosed made of MS sheet 3.15 mm thick outdoor type , weather proof having sloping canopy with locking arrangement both side openable complete with and painting (factory made) of following. INCOMING (a) 4 pole MCCB 250 Amp, 50 Hz,415 V with rupturing capacity 36 KA-01No. OUTGOING: (a) 4 pole MCCB 160 Amp,50Hz,415V with rupturing capacity 36KA-06Nos. (b) Busbar aluminium 400 Amps with air insulated for TPN-one set. (c) Indicator lamp LED type-3Nos. (d) Panel wiring with 2.5 sqmm copper cable PVC single core-each Job (e) PCC plateform with foundation in PCC 1:2:4 = Each Job (f) MCB TPN 63 Amp 03 Nos (g) Digital panel meter for voltage and current with necessary CTs & PTs

Supply, install, testing and commissioning of outdoor type factory assembled diesel driven generating set with silent (acoustic) enclosure with fully wired alternator AC for ambient conditions at Jammu (at site) to give output of 100 KVA (80 KW) continuous rating at power factor 0.8, 415 volts + 2.5% AC 3 phase, 4 wire, 50 Hz + 1 %, 1500 rpm directly coupled with diesel engine water cooled mounted on common base frame placed on & including PCC platform with floor mounted Fuel Tank of adequate capacity with fuel lines, anti vibration pads, standard control & AMF panels and other accessories etc complete all as specified & directed consisting of following :- (Note:- The capacity of generating set shall be net after accounting derating factors as per relevant ISI design.)

(A) Prime Mover (Diesel Engine) :- Adequate capacity diesel engine of standard design consist of direct injection type, turbo charged four stroke, liquid cooled technology conforming to BS 5514 and IS 10000 suitable for prime duty generating set 100 KVA / 80 KW of suitable BHP @ 1500 RPM with multi cylinders to drive independently alternator and considering derating as per site condition after generating and reducing power consumed by accessories, directly coupled through coupling having overload capacity of 10% for one hour in every 12 Hrs continuous running mounted on base frame with following salient features and standard accessories for safe handling & operation of engine as under:-

(a) The gen set should have capacity to run continously in variable load condition for unlimited hours and should also have a 110% load capacity of 01 hour in every 12 hours of operation. (b) Air System - Inlet & Exhaust comprising (i) Dry-type paper element air Cleaner (ii) Restriction Indicator / Vacuum Indicator (iii) Optimised Turbocharger (iv) Intake Manifold (v) Exhaust Manifold (vi) Silencer muffler and (vii) Stainless steel Exhaust Flexible coupling (c) Cooling System comprising (i) Radiator to suit ambient conditions (ii) Cooling system piping (iii) Thermostat (iv) Pressure cap (v) Coolant Inhibitor and (vi) Engine Driven Fan (d) Fuel System comprising (i) Fuel pump -Low pressure type (ii) Injectors (iii) Cartridge paper filters primary and secondary for Fuel (e) Governor :- Engine Electronic Governor for A1 governing of engine speed from No load to full load. (f) Lub Oil System :- (i) Plate Type lub oil cooler (ii) filters-lubrication oil.

(g) Electric Starting system comprising (i) Electrical starter - 12 Volts (ii) Engine driven battery charging alternator (iii) Cut Out and (iv) One No of 12 volts of 150 AH maintenance free battery with suitable connection terminals and leads for proper battery connection (h) Engine Monitoring, Protection and Diagnostics relay suitable to display following (i) Lub oil Pressure (ii) Coolant Temperature (iii) Engine Speed (iv) Hours Run (v) Battery Voltage, Battery charging voltage (vi) Fuel level in percentage, (vii) AC Voltage 3 phase (viii) Current RYB 3 phase (ix) Power Factor (x) Frequency (xi) KVA (xii) Kilowatt and suitable for (i) Start and Stop (ii) Common Shutdown (iii) High coolant temp warning and shutdown (iv) Low lube oil pressure warning and shutdown (v) Low fuel level shutdown (vi) Overspeed shutdown (vii) Alternator Protection (viii) Over voltage (ix) Under voltage (x) Over and under frequency (xi) Over current (j) Engine fitted with low lube oil pressure (LLOP) & high water temperature (HWT) Safety devices and also fitted with requisite temperature and pressure gauges. (k) Misc Accessories i.e - (i) Flywheel Housing (ii) Flywheel (iii) Anti-vibration pads (iv) Emergency stop push button etc all as required for smooth operation of DG set as recommended by manufactrurer.

(B) ALTERNATOR :- Self excited, self regulated screen protected drip proof type with Class 'H' Insulation Salient pole revolving field and electronic Automatic Voltage Regulator for voltage regulation of + 0.5% from No load to full load, standard enclosure 415 Volt 50 HZ 4 pole 100 KVA cap complete as per IS-13364-2 and conf to IS-4722 or BS 2613-1970 all as required or recommended by manufactrurer. (C) BASE FRAME :- Made of ISMC fabricated and welded construction channel duly painted for mounting Engine and Alternator all as per manufacturer's design along with specially designed in built vibration pads.

(D)Control & AMF Panel:- AMF panel board free standing floor mounted factory made outdoor type made out of CRCA sheet 2mm thick totally enclosed, weather dust and vermin proof with front opening, 440 volts 3 phase 4 wire 50 Hz having aluminium bus bar of suitable capacity for three phases and neutral duly powder coated with coloured heat shrinkable PVC sheelves, Multi-colour Status indicator, Multifunctional digital controler relay for AMF operation and display of electrical parameters, manual/ auto Start/Stop facility, Two Nos Electrically operated modular contactor 4 pole of suitable capacity for DG set and Main supply (auto shifting of electrical load is required), 250 Amps MCCB FP -01 No for load, and provision of Overload protection relay, Phase sequance and Single phase prevention, High voltage and under voltage protection arrangements for Contactors complete all as specified, with on/off controller indicator, Phase Indicators, engine start push button, engine stop push button and fault accept / reset push button including battery charger comprising transformer, rectifier, resistance, DC volt meter DC Amp meter and charge rate selector switch, all accessories prewired with suitable size copper conductor cable or strip all as required or recommended by manufacturer.

(E) Acoustic Enclosure (CANOPY) :- Aesthetically enhanced canopy and Shall conform to Central Pollution Control Board (CPCB) norms of 75 dBA at one metre under free field conditions, having air inlet louvers specially designed to operate at rated load even at ambient conditions on air inlet temperature,powder coated for long lasting service life and superior finish with UV resistant powder coating to with stand extreme environments, designed to have minimum ease for unloading & shifting , i.e with central lifting facility, rust free hardware made of stainless steel, Insulation material to meet IS:8183 specifications.

(F) Fuel Tank :- Draw out type integral fuel tank made of MS sheet (duly painted) of capacity min 200 ltrs or as recommended by manufacturer with level indicator in ltrs, provided with drain plug and air vent / breather and inlet and outlet connections. (G) Foundation :- Size and type of PCC platform for mounting DG Set and AMF Panel required to be constructed as per manufacturer's specification or as recommeded by Engr - in - Charge. (H) Genset Complete shall have inbuilt remote Monitoring system with android application and enabled with QR code. (J) Arrangement of POL for testing of DG Set done by the contractor and rates deemed to be included in quoted rate. (k) Two years Maintenance Spares and tools for basic maintenance shall be provided by the contracter as specified in PS

Sub Total i.e. Total of Schedule 'A' Part-XVI i.e. Serial Item No 11.01 to 11.44