Military Engineer Services Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date6 Feb 2025
Closing Date27 Feb 2025
Tender Amount₹ 29,30,000
Costs
EMD
₹ 58,600Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_696655_1Tender No
GE/BAS-65/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Special repair of building No NP-01 and NP-05 at Thimayya enclave at Basoli under GE Basoli
Special repair of building No NP-01 and NP-05 at Thimayya enclave at Basoli under GE Basoli
Special repair of building No NP-01 and NP-05 at Thimayya enclave at Basoli under GE Basoli
BOQ Items
... More
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, in any type of soil getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified.
4
-
-
... More
M&L Reinforced cement concrete M-20 (Nominal mix) using 20mm graded crushed stone aggregates as in slabs/shelves, supported on walls, beam and columns in floors and in shelves and the like complete all as specified and directed.
1.25
-
-
... More
M&L TMT bars 8 to10mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
150
-
-
... More
Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.
21
-
-
... More
Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed.
18
-
-
... More
Taking down Shutters of any description exc 1.00 sqm but n exc 2 Sqm, complete all as specified and directed
2
-
-
... More
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete of frame size 105 x 60 mm complete all as specified and directed.
19
-
-
... More
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete of frame size 125 x 60 mm complete all as specified and directed.
24
-
-
... More
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete of frame size 60 x 40 mm complete all as specified and directed.
5
-
-
... More
M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed .
0.3
-
-
... More
S&F 2nd class hard wood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
22
-
-
... More
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm PVC Ultra Violet chemical, glossymate finish 100% termite/water proof, fire retrandent eco friendly, PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing
9
-
-
... More
S&F factory made solid panel PVC Mounlded door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS Frames shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail: Paneling of wood grain printed PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with 5mm x 15mm wide PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.
3
-
-
... More
S&F For Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with sash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a) complete all as specified and directed.
13
-
-
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
5
-
-
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter decorative type, of 30 mm size comprising of virgin polymer of K value 58-60 ,calcium carbonate and natural fibre and non toxic additives minimum compressive strenth 50 N/ mm2 ,modulas of elasticity 850 n/ mm2 and resistance to spred of flame of Class A cateegory with property of being termite /borer proof ,water /moisture proof and fire retardant . WPC to be Laminated with PVC foil of minimum 14 microns thick of approval design pasted with hot melt adhesive on both faces of shutter and fixing with stainless butt hinges of required size with neccessary full body threated star headed counter sunk s.s screw shall , all as per direction of enginner In charge.
2
-
-
... More
M&L for Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. , complete all as specified and directed.
175
-
-
... More
M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
15
-
-
... More
S&F for powder coating aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections as mentioned below weighing 0.55 kg/m and glazed/ gauged with glass pans/ stainless steel fly proofing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) American suitable handle (1 no.) of size 75mm, tower bolt 100mm long(2 Nos) etc complete all as specified. size of rail and style 83-84mm/ 44-45mm complete all as specified and directed.
10
-
-
... More
Repair/ easing of wooden door incl taking down and refixing any type, glazed or panelled, by trimming the side of door shutter where rubbing with chowkhat, unscrew the hinges screws and lift the door and fix with screws, tightening of wire mesh etc, complete all as specified and directed.
2
-
-
... More
Material and labour for repairing aluminium shutters ( Door/ Window) including taking down, refixing, tightening and making good with using rubber/beads and others small fixtures/fittings if required and making serviceable, complete all as specified and directed.
5
-
-
... More
S&F for 12 mm Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required and fixing the same with metal panel pins., complete all as specified and directed.
50
-
-
... More
S & F in repair/new Anodised aluminium grills, 6mm dia size 100x100mm fixed to aluminium windows and thickness of powder coating not less than 50 micron complete all as specified and directed.
27
-
-
... More
Supply and fix in repair/new Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed.
30
-
-
... More
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
34
-
-
... More
S&F 3 mm thick figured glass sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
3
-
-
... More
S&F for 100 mm butt hinges, Stainless steel complete all as specified and directed complete all as specified and directed.
18
-
-
... More
S&F stainless steel barrel tower bolts 200 mm long of extruded section fixed with stainless steel screws, ISI marked, complete all as specified and directed.
25
-
-
... More
S& F in repair mild steel Peg set of four hooks size 50mm to 60mm complete all as specified and directed.
2
-
-
... More
Supply & fixing 100mm hasp and staple aluminium anodised, including bolt to hinge plate and fixed with screwscomplete all as specified and directed.
15
-
-
... More
S&F aluminium handle, cast type, anodised,100 mm size. complete all as specified and directed.
28
-
-
... More
S&F aluminium alloy, anodised, sliding door with hasp and size 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and directed.
13
-
-
... More
S&F in repair/new aluminium hanging floor door stopper,Twin rubber stopper,size 100mm , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and directed.
8
-
-
... More
S&F in repair/new Door Seal. complete all as specified and directed.
5
-
-
... More
S & F 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and directed.
5
-
-
... More
Supply & fixing 100mm hasp and staple aluminium anodised, including bolt to hinge plate and fixed with screws, complete all as specified and directed.
10
-
-
... More
S&F continous (piano) hinges mild steel, 40mm width of flaps (when open), bright finish or electrogalvanised complete all as specified and directed.
8
-
-
... More
M&L magnet catcher for kitchen cabnet complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej, Harrison or equivalent make.complete all as specified and directed.
29
-
-
... More
M&L for steel fancy handle 200 mm size for kitchen cabnet complete all as specified and as per sample kept in GE office. Make:-Hettich, Godrej Harrison or equivalent make.complete all as specified and directed.
29
-
-
... More
S&F in repair Brass Mortice lock for Aluminium doors with fittings , 4 lever concelead type, size 100 mm including complete accessories complete all as specified and directed.
5
-
-
... More
Supply and fixing in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.
2
-
-
... More
M&L for crank hinges for kitchen cupboard/ almiraha. Any size any type for md offrs accn complete all as specified and as per sample kept in GE office.Make:-Hettich,Godrej Harrison or eequivalent make complete all as specified and directed.
7
-
-
... More
S&F in repair for 18-20 mm thick PVC Ultra Violet chemical, glossymate finish 100% termite/water proof, fire retrandent eco friendly soild board one side decorative choice laminate and other side balancing white of weight not less than 8Kg/Sqm as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc including dismantling dismantling of of board, complete all as specified and directed.
45
-
-
... More
M&L for Writing letters or figures (Block, Roman. Italic or Indian) n.exc 30cm high of any description n.exc 0.2 Sqm with paint as per direction of Engr-in-charge complete all as specified Such as NP-02, P-101, T-104
2
-
-
... More
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
50
-
-
... More
S&F in Repair /Replacement Pre-painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.47-0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws Iincluding dismantling, asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc complete all as specified and directed.
45
-
-
... More
S&F in Repair /Replacement Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.47-0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws Iincluding dismantling , asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc complete all as specified and directed.
6
-
-
... More
M&L steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed.
11
-
-
... More
M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
5
-
-
... More
M&L for preparation of old wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed .
12
-
-
... More
M&L for preparation of new wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over and including of one coat of pink primer complete all as specified and directed .
48
-
-
... More
M&L for preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed .
5
-
-
... More
M & L for Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coat of oil bound distemper on walls, pillars, cornices surface including making good uneven surface/holes and smoothening of surface with birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed.
310
-
-
... More
Preparation of new plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. and applying two coat of weather proof exterior emulsion paint (APEX) of Alkali & fungal resistance,dirt resistance qualities in same shade and color as approved over a coat of primer using smart periodical techniques etc (up to 2nd storey with necessary scaffolding) complete all as specified and directed.
580
-
-
... More
Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of distempered and painted surfaces including preparation of old plastered surfaces of walls and applying two coats of interior emulsion over and including one coat of primer over two coats of Birla wall care putty 1 to 2 mm thick on plastered surfaces, preparatory to distempering. complete all as specified and directed.
60
-
-
... More
Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of painted surfaces including preparation of old plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. and applying two coat of weather proof exterior emulsion of Alkali & fungal resistance,dirt resistance qualities, after making good uneven surface/holes with Birla wall care putty coloured in same shade where ever required using smart periodical techniques etc (up to 2nd storey with necessary scaffolding) complete all as specified and directed.
560
-
-
... More
M&L For Polycarbonate Acrylic sheet 1.5 mm thick of any colour/shade as in roof covering /clading to wall fixed with self taping screw as specified and as directed.(Sample as approved & Kept in GE's sample room)
2
-
-
... More
S&F Framed work such as grills,gratings, etc.. with ends of bars
shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
50
-
-
... More
Material and labour for plain cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
5
-
-
... More
Removing of existing roof treatment complete all as specified and directed.
500
-
-
... More
M&L of roof treatment with the following specification - Applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished all as specified and as directed.
NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE. complete all as specified and directed.
500
-
-
... More
M&L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate), top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed.
20
-
-
... More
S&F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed.
5
-
-
... More
S&F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed.
5
-
-
... More
S&F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.
12
-
-
... More
S&F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.
3
-
-
... More
S&F PVC (SWR) Bends in any radius 110 mm bore in repair complete all as specified and directed.
2
-
-
... More
S&F PVC (SWR) Bends in any radius 75 mm bore in repair complete all as specified and directed.
3
-
-
... More
S&F PVC (SWR) Bends in any radius 110 mm bore with access door in repair complete all as specified and directed.
1
-
-
... More
S&F PVC (SWR) Bends in any radius 75 mm bore with access door in repair complete all as specified and directed.
1
-
-
... More
S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
4
-
-
... More
S&F PVC (SWR) branch piece junction single (single T) equal or unequalprovided 110 mm bore complete all as specified and directed.
2
-
-
... More
S&F PVC (SWR) branch piecejunction single (single T) equal or unequal provided 75 mm bore complete all as specified and directed.
3
-
-
... More
S&F PVC (SWR) reducer 110mm bore complete all as specified and directed.
1
-
-
... More
S&F in repairs for 110mm bore PVC (SWR) P trap plain complete all as specified and directed
2
-
-
... More
S&F PVC (SWR) Vent cowl 75 mm bore in repair..complete all as specified and directed.
1
-
-
... More
S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
6
-
-
... More
S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
2
-
-
... More
Demolition of Wall panelling/ Boards/ sheets any type (Fibre, pulp, insulation, etc.) incl cover fillets complete all as specified and directed.
50
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
0.5
-
-
... More
S&F Plates (plain or chequered)channels, square cut or notched (ordinary and counter sunk) with riveted, bolted or welded attachment complete all as specified and directed.
20
-
-
... More
M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 at grade st 240.complete all as specified and directed.
70
-
-
... More
S&F Rolled sections as in main and cross beam, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plate using Fe 410-W (Gde E-250) quality'A'., complete all as specified and directed.
250
-
-
... More
M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down old complete all as specified and directed.
2
-
-
... More
M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down old complete all as specified and directed.
2
-
-
... More
S&F in repair 15mm bore chromium plated cast copper alloy bib taps fancy type long body with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all complete all as specified and directed.
11
-
-
... More
S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe and fixed complete all as specified and directed.
1
-
-
... More
S&F in repair 5mm thick frame less beveled plain mirror for dressing , bathroom, living room and entrance fixed with chromium plated brass screws and cup washers on wall of size as approved/required complete all as specified and directed .
1.5
-
-
... More
S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges complete all as specified and directed.
2
-
-
... More
S&F in repair brass chromium plated towel ring complete all as specified and directed.
2
-
-
... More
S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.
2
-
-
... More
S&F in repair Vitreous China, Counter top Hand wash basin any colour , size 600x400x150 mm including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. Complete all as specified and directed
2
-
-
... More
S&F in repair Single lever tall body with 150 mm extension Body Basin Mixer without Popup Waste System with 600 mm Long Braided Hoses complete all as specified and directed
2
-
-
... More
S&F in repair Vitreous China urinals sensor type, bowl type (back or corner wall type) , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and urinal spreader with integrated wash basin and sensor tap Complete all as specified and directed. Make: Cera, Jaquar, Hindware.
2
-
-
... More
Repair of Vitreous China urinals sensor type bowl type including replacing of batteries/refixing/replacement of unserviceable parts Complete all as specified and directed.
1
-
-
... More
S&F in repair 15 mm bore CP jet spray for Pedestal pattern WC all complete all as specified and directed.
1
-
-
... More
S&F flush pipe of polyethylene of low or high density or PVC 32 mm dia, for wash hand basin / sink complete all as specified and directed.
2
-
-
... More
S&F waste coupling of (half or full threaded), (32/40mm dia, minimum weight 45 gms) for WHB complete all as specified and directed.
2
-
-
... More
S&F in repair wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe and CP jet spray, etc complete all as specified and directed.
1
-
-
... More
S&F in repair under counter basin white colour with fixing accessories set, size: 560 x 470x190, Oval shape, including CP Waste Coupling and PVC waste pipe complete all as specified. and directed
1
-
-
... More
S&F in repair PVC valveless,syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and directed
1
-
-
... More
S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed
35
-
-
... More
Refixing of 15mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed.
15
-
-
... More
S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed
15
-
-
... More
Refixing of 20mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed
5
-
-
... More
M&L for demolition of Concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
4.5
-
-
... More
S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. (Including necessary fittings) complete all as specified and directed.
50
-
-
... More
Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick above or below ground level. complete all as specified and directed.
5.25
-
-
... More
M&L for cement concrete type B-0 1:2:4 using (12.5 mm graded stone aggregates) 25 mm thick in flooring complete all as specified and directed.
80.5
-
-
... More
M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.
266
-
-
... More
M&L for 10mm thick rendering/screeding on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed.
109
-
-
... More
M&L 4mm thick designer ceiling board in ceiling fixed in ceiling laid over and including hot dipped galvanised iron grid (powder coated ) with 24 mm wide T section exposed flange . The frame work shall comprise of main runner made from 0.33mm thick galvanised steel sheet spacing at 600X600 mm and perimeter wall angle shall be of size 19X19mm complete incl taking down old ceiling,complete all as specified and directed.
20
-
-
... More
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
310
-
-
... More
M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
294
-
-
... More
Material and labour Vitrified Ceramic(Double Charged) edge cut joint free coloured or printed any shade tiles (square/ rectangular) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match .(Sample as approved & Kept in GE's sample room) complete all as specified and directed.
65
-
-
... More
Material and labour Vitrified Ceramic(Double Charged) edge cut joint free coloured or printed any shade tiles (square/ rectangular) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm , in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match .(Sample as approved & Kept in GE's sample room) complete all as specified and directed.
5
-
-
... More
Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface . (sample as approved & kept in GE's sample room) complete all as specified and directed.
80
-
-
... More
Material and labour glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface (sample as approved & kept in GE's sample room) complete all as specified and directed.
65
-
-
... More
M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
121
-
-
... More
M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
15
-
-
... More
M&L for rendering 10mm thick in cement mortar 1:6, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, preparation of new plastered surfaces of walls and applying 3mm thick wall care putty and two coat oil emulsion distemper on walls complete all as specified and directed.
390
-
-
... More
M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps ( tread/ riser) in single piece , jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 complete all as specified and directed
18
-
-
... More
M&L 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado or in vertical surfaces otherwise specified and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick rendering 1:4, grinding and polishing complete all as specified and directed
15
-
-
... More
Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform , and other similar situations etc. complete all as specified and directed
19.5
-
-
... More
M & L for Durastone / Endura heavy duty virtified tiles of size 300mmX300mmX 10-12mm mm thick set jointed and pointed in neat cement slurry in floors with grey cement over 15 mm thick screed bed of 1:4 cement mortar finished cemnt concrete surface fair & even without using extra cement complete all as specified and directed.
30
-
-
... More
Taking down cement plaster on brick or concrete surface of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
769
-
-
... More
S&F in repair Corner Glass Shelf (with Bracket) complete all as specified and directed
1
-
-
... More
S&F in repair Fancy type health faucet with 8mm dia 1mtr long flexible tube (back flow preventer), chromium plated of 15mm bore, all as specified and directed.
3
-
-
... More
S&F in repair Curtain rod 20mm dia of Stainless steel with including PVC/SS brackets , Stops, rollers etc. Complete all as specified and directed.
15
-
-
... More
S & F in repair Gun metal,globe or gate valve screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 20 mm,. complete all as specified and directed .
5
-
-
... More
S & F in repair Gun metal,globe or gate valve screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm,. complete all as specified and directed .
3
-
-
... More
S&F in repair/new stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe. complete all as specified and directed .
5
-
-
... More
S&F in repair chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed.
1
-
-
... More
S&F in repair Wall mixer, Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed with15 mm bore pipe including all necessary fixing arrangement complete all as specified and directed.
2
-
-
... More
S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 4 mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dig GI bar hangers from the purlins of the roof with butter fly clips incl dismantling of old false ceiling complete all as specified and directed.
25
-
-
... More
M&L Cement concrete M-15 (Nominal mix),type B-2, 1:2:4, (using 40 mm graded crushed stone aggregates) in foundation filling and mass concrete, post holes etc complete all as specified and directed.
0.5
-
-
... More
Demolition of brickwork built in cement mortar including all quions, arches, pillar complete all as specified and directed
9
-
-
... More
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 , complete all as specified and directed
5
-
-
... More
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 , complete all as specified and directed
23
-
-
... More
All as per item No above, but except brick , complete all as specified and directed
3
-
-
... More
Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying two coat of white wash on ceiling, complete all as specified and directed.
145
-
-
... More
M & L for Half thick Brick wall work curved on plan in any radius with old size bricks built in cement mortar 1:4 and external pointed flush in same mortar as the work proceeds. complete all as specified and directed
2
-
-
... More
M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement mixed with liquid water proofing compound complete all as specified and directed
430
-
-
... More
M&L 75 mm thick PCC, type C-2, 1:3:6, ( using 40mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without nusing extra cement. complete all as specified and directed
135
-
-
... More
M&L for rendering 5 mm thick in CM (1:3) finished surface even and smooth w/o using extra cement in ceiling. and applying three coats of white wash on ceiling complete all as specified and directed
74
-
-
... More
Supply only integral Water Proofing Compound. complete all as specified and directed
20
-
-
... More
Taking down ,dismantling of broken/loose portion of chajja ,facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork /scffolding and matching with existing surface of facia (including white wash /colour wash or cement base paint )chajja upto 2nd floor complete all as specified and directed.
150
-
-
... More
S & F in repair Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size (30"x36"x10") fixed with steel fastners or steel screw complete all as specified and directed.
1
-
-
... More
S&F in repair stainless steel lock grating plain/hole size 100 mm dia including embeding in tiles with white cement.complete all as specified and directed.
5
-
-
... More
S&F in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm & bowl size 410mm x 355mm x 200mm complete with CP waste coupling & PVC waste pipe complete all as specified and directed.
1
-
-
... More
Taking down old damaged SGSW pipes including necessary excavation, supply and jointing of PVC underground drainage pipe (UDS) type 'B' 160mm dia with thickness 4mm (min) and pressure rating SN4 as per IS-15328, jointed in cement solvent solution complete including testing, haunching against the sides of pipes in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including returning, filling in and disposal of surplus soil to a distance n.exc. 50m complete all as specified and directed.
18
-
-
... More
M&L precast Reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in man hole covers set in cement mortar 1:6 incl necessary form work. complete all as specified and directed Note: Steel reinforcement shall be measured and paid for separately under respective items
0.25
-
-
... More
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 2 core including taking down existing cable complete all as specified and directed
55
-
-
... More
Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed.
68
-
-
... More
M&L for point wiring for light point/fan/exhaust fan point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) in and including PVC concealed conduit having thickers 1.8mm with all fittings, pressed sunken box thickness of sheet not less than 2mm thick suitable for modular switches and socket including 1.5 sqmm copper conductor (FRLS) as earth continuty conductor connected to comman earth dolly in and including cutting chiseling for concealed piping as required and making good disturbed surface area and white wash/ colour wash to matching with the existing colour complete all as secified and directed. NOTE :- (a) Insulation test of point wiring (i) colour coding is to be mainted (Pjh-red, N-black, half-yellow, Earth-green). Make of wire: L&T, plaza & Finolex and Conduit Make : Finolex, plaza & kamplast.
(b) Rate for cutting chases for conduit and finishing metal boxes including making good the distrubed surface deemed included in quoted rates
(c) Modular switch, socket, cover plate and all connected acessores shall be paid seperately in respective items.
42
-
-
... More
All as per item No 158 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed.
9
-
-
... More
All as per item No 158 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed.
9
-
-
... More
M&L for point wiring for light point/fan/exhaust fan point controlled by one switch with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) in and including PVC concealed conduit having thickers 1.8mm with all fittings, pressed sunken box thickness of sheet not less than 2mm thick suitable for modular switches and socket including 2.5 sqmm copper conductor (FRLS) as earth continuty conductor connected to comman earth dolly in and including cutting chiseling for concealed piping as required and making good disturbed surface area and white wash/ colour wash to matching with the existing colour complete all as secified and directed. NOTE :- (a) Insulation test of point wiring (i) colour coding is to be mainted (Pjh-red, N-black, half-yellow, Earth-green). Make of wire: L&T, plaza & Finolex and Conduit Make : Finolex, plaza & kamplast.
(b) Rate for cutting chases for conduit and finishing metal boxes including making good the distrubed surface deemed included in quoted rates
(c) Modular switch, socket, cover plate and all connected acessores shall be paid seperately in respective items.
8
-
-
... More
S&F in repair/replacement Modular switch one way 6A,1 Module, complete all as specified and directed .
60
-
-
... More
S&F in repair/replacement Modular socket 6/10A-2/3 pin combined 2 Module complete all as specified and directed .
18
-
-
... More
S&F in repair/replacement Modular switch one way 16A,1 Module, complete all as specified and directed
8
-
-
... More
S&F in repair/replacement Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed.
8
-
-
... More
S&F in repair/replacement Fan step regulator, 120W - 2 module, complete all as specified and directed .
5
-
-
... More
S&F in repair/replacement Modular bell push 6A,1 Module, complete all as specified and directed .
1
-
-
... More
S&F in repair/replacement bell ding dong type, complete all as specified and directed .
1
-
-
... More
S&F modular white cover plate with frame 8 modular complete all as specifed and directed.
4
-
-
... More
S&F modular white cover plate with frame 6 modular complete all as specifed and directed.
2
-
-
... More
S&F modular white cover platewith frame 4 modular complete all as specifed and directed.
5
-
-
... More
S&F modular white cover plate with frame 3 modular complete all as specifed and directed.
19
-
-
... More
S&F modular white cover platewith frame 1 modular complete all as specifed and directed.
3
-
-
... More
S&F for lamp holder/batton holder/angle holder insulated body (Metal ring) with bakelite plate for batten comple all as speciifed and directed
4
-
-
... More
M&L for ceiling rose 65x50mm three terminals including bakelite back plate on back side of ceiling rose complete all as specified and directed.
35
-
-
... More
S&F in replacement LED 20 watt 6000K batten tube light fitting with polycarbonate diffuser, 4 feet fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size. complete all as specified and directed.
8
-
-
... More
S&F Wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver, 20 Watt LED fitting with 100 lumen/watt 6000k, 230Volts, diffused optics etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round block and testing complete all as per specified and directed.
10
-
-
... More
S&F in replacement LED 10 watt, 6000K batten tube light fitting with polycarbonate diffuser, 2 feet fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
4
-
-
... More
Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store in safe custody for minor repairing/painting and after hanging as per direction of Engr-in-charge.
5
-
-
... More
Supply and fixing Exhaust fans AC single phase 230/240 Volts of size 450mm sweep including louvers complete all as specified and directed.
2
-
-
... More
Supply and fixing PVC body exhaust fans AC single phase 230/240 Volts of size 300mm sweep including hole making complete all as specified and directed.
2
-
-
... More
S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (SPN) 8 way fitted with copper bus bar rated 200 Amp (SPN) distribution board for MCB provisions 230Volt, 50Hz AC with neutral link , earth bar complete all as per specified and directed.
1
-
-
... More
S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (SPN) 12 way fitted with copper bus bar rated 200 Amp (SPN) distribution board for MCB provisions 230Volt, 50Hz AC with neutral link , earth bar complete all as per specified and directed.
1
-
-
... More
S&F in replacement LED 36 watt Aesthetically designed LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination 2 x 2 ft size fixed on exting ceiling with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable sizer complete all as specified and directed.
4
-
-
... More
S&F MCB SPN 6-32 Amps with 10KA breaking capacity of 'B' series in distribution board complete all as per specified and directed.
1
-
-
... More
S&F MCB SP 6-32 Amps with 10KA breaking capacity of 'B' series in distribution board complete all as per specified and directed.
16
-
-
... More
S&F MCB SPN 40 Amps with 10KA breaking capacity of 'B' series in distribution board complete all as per specified and directed.
1
-
-
... More
S&F in repair decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base complete all as per specified and directed.
4
-
-
... More
S&F energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with high power LED as lighting source and lens embedded PC cover having IP66 protection and impact resistance of IK08 suitable of 35 watts LED 5700 K complete fitted on bldg with brackets made out of 32mm dia GI pipe medium grade 1.5 in length long with suitable size of 2 Nos MS flat clamps FI 25x3 mm including nuts, bolts including connecting up with PVC copper conductor wire 1.5 sqmm s/c from security light to ceiling rose etc, complete all as specified and directed.
Note: (i) contractor shall produce LM 79 & LM 80 test report form OEM owned NABL accredited laboratory. (ii) Contractor shall give guarantee of complete fitting/fixtures for minimum of 2 years from the date of completion. (iii) Contractor shall conduct the inspection of company representative at site before installation of fittings/fixtures at no extra cost. (iv) Contractor shall arrange 70% material at site for approval of GE before incorporation in the work
2
-
-
... More
M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthling wire .)
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%