Military Engineer Services Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date10 May 2023
Closing Date15 Feb 2025
Tender Amount₹ 13,14,00,000
Costs
EMD
₹ 9,82,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_594188_1Tender No
87908-A/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolition of brick work or stonework or precast concrete articles and precast concrete block walling ,built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings ,dressed stonework and precast concrete articles and stacking the serviceable materials within 100m and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.
337
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
3.5
-
-
... More
Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified and directed.
945
-
-
... More
Removing demolished building materials etc to a distance exceeding 1 Km beyond the lead already included in the respective items including
loading, unloading and stacking at the destination complete all as specified and directed.
2007
-
-
... More
Surface dressing not exceeding 15 cm deep in any type of soil complete all as specified and directed.
10564
-
-
... More
Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.
4478
-
-
... More
Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in any type of soil, complete all as specified and directed.
5824
-
-
... More
Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard rock, complete all as specified and directed.
673.5
-
-
... More
Excavation in trenches, not exceeding 1.5 mtr wide and exceeding 1.5 mtr and not exceeding 3 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard rock, complete all as specified and directed.
298
-
-
... More
Excavation over areas, n.exc 1.5m deep and getting out in any type of soil complete all as specified and directed.
4997.5
-
-
... More
Excavation over areas, exc 1.5m deep but not exc 3m deep and getting out in any type of soil complete all as specified and directed.
3873.5
-
-
... More
Excavation over areas, exc 3m deep but not exc 4.5m deep and getting out in any type of soil complete all as specified and directed.
1373
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25Cm, complete all as specified and directed.
8527
-
-
... More
Forming embankments including raising (or lowering) earth, spreading in layers n exc 30 cm thick; watering, ramming/ rolling and finishing to required size, shape, etc, n exc 1.5 m high from base complete all as specified and directed.
1061
-
-
... More
Removing excavated materials/ soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed.
4647.5
-
-
... More
Removing excavated materials/ soils, exceeding 250mtrs not exceeding 500mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed.
1839
-
-
... More
Removing excavated materials/ soils, exceeding 1Km but not exceeding 1.5Km and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed.
3463
-
-
... More
Hard core of broken stone or boulders of gauge not exc 63 mm deposited, spread and leveled in layer not exc 15 cm thick complete all as specified and directed.
103.5
-
-
... More
Hand packing (any thickness) of broken stone or boulders at back of walls over arches etc. and raising (or lowering) to the required level complete all as specified and directed.
365
-
-
... More
Treating the backfill in contact with sides of columns below ground level @ 7.5 litres of emulsion /Sqm of vertical surface complete all as specified and directed.
29.6
-
-
... More
Treating the backfill in contact with wall @ 7.5 litres of emulsion /Sqm of vertical surface complete all as specified and directed.
23
-
-
... More
Treating the bottom & sides of excavation, under sub base and plinth protection @ 5 litres of emulsion/Sqm of surface area complete all as specified and directed.
110
-
-
... More
Treating the soil along with external perimeter of building @ 2.25 litre of emulsion/metre of the perimeter wall complete all as specified and directed.
41.5
-
-
... More
50mm dia high density polyethylean pipe (HDPE) and pressure rating 6kgf/cm2 as weep hole (retaining walls) ( complete all as specified.
117
-
-
... More
PCC 1:5:10 (nominal mix) type E-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.
4
-
-
... More
PCC 1:4:8 (nominal mix) type D-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.
1197.25
-
-
... More
PCC 1:3:6 (nominal mix) type C-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.
39
-
-
... More
PCC 1:2:4 (nominal mix) type B-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.
5
-
-
... More
Extra for forming fair finished drain or channel n.exc 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped ends etc complete all as specified and directed.
1950
-
-
... More
Providing precast cement concrete type B1 1:2:4 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes, drain etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles and set in cement mortar 1:4 all as specified.
0.75
-
-
... More
Providing cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in roof kerbs or mud stops rounded or chamfered on edges in lintels upto 1.50m clear span cills steps seismic and other similar nads plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height , coping , kneelers, apex stones bed plates,water troughs and the like including weathering slightly rounded or chamfered angles and throating as directed complete including necessary formwork where required complete all as specified.
126.5
-
-
... More
RCC (M-25 design mix) (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all specified.
95
-
-
... More
RCC (M-25 design mix) (using 20mm graded crushed stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all specified.
226
-
-
... More
RCC (M-35 design mix) (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all specified.
2003
-
-
... More
RCC M-35 (Design mix) (using 20 mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed.
1032.5
-
-
... More
RCC M-35 (Design mix) (using 20 mm graded crushed stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
632
-
-
... More
RCC M-35 (Design mix) (using 20 mm graded crushed stone aggregates) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.
463.5
-
-
... More
RCC M-35 (Design mix) (using 20 mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
98.5
-
-
... More
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc for rough finished surfaces of concrete flat all as specified
2085.89
-
-
... More
Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressumers, lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc for fair finished surfaces of concrete flat complete all as specified.
2444
-
-
... More
Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressumers, lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc for rough finished surfaces of concrete flat complete all as specified.
1314
-
-
... More
Formwork to square, rectangular or polygonal sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces of concrete complete all as specified.
4711.08
-
-
... More
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc: vertical or to batter; fair finished surfaces of concrete flat all as specified.
5171
-
-
... More
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc: vertical or to batter; rough finished surfaces of concrete flat all as specified.
491
-
-
... More
Form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete flat, complete all as specified & directed.
57.5
-
-
... More
Form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete flat, complete all as specified & directed.
287
-
-
... More
Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished surfaces of concrete, complete all as specified & directed.
163.5
-
-
... More
Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified.
2980
-
-
... More
Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.
70.5
-
-
... More
Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 and pointed flush in the same mortar as the work proceeds complete all as specified.
9.5
-
-
... More
Brick work with fly ash bricks (old size), straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 for cable ducts complete all as specified.
80
-
-
... More
Factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing on page No 180 of MES SSR 2020 Part-II complete all as specified and directed.
10
-
-
... More
Pressed steel frame using 1.25 mm thick PBI sheet (size of frame 125 x 60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock/ strike plate etc and filling with PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in back of chowkats complete all as specified.
10.5
-
-
... More
35mm thick second class hardwood (Sal/Hollock) factory made plain framed panelled shutter (two panel) with lock rails & panel of 9 mm B.W.P commercial ply wood or 12 mm thick veneered particle board with commercial veneering on both side. The size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.
3.9
-
-
... More
35 mm thick 2nd class hard wood (Sal/Hollock)) glazed & skeleton factory made shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass, etc, sizes of members of door shutters as specified in SSR- 2009 Part-I Section 8.24(a) complete all as specified and directed.
3.9
-
-
... More
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of 5 mm thick plain coloured PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, drawing on page No 176 of MES SSR 2020 Part-II complete all as specified and directed.
2.9
-
-
... More
Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed skeleton shutter, jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc complete all as shown on drawing No. CEUZ/TD/1302/09 sheet 1/3 to 3/3 amended upto 02/06/12 and including necessary iron mongery, glazing, wire gaugecomplete all as specified and directed.
2.9
-
-
... More
250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
4
-
-
... More
Aluminium handles cast type anodized of size 150 mm complete all as specified and directed.
12
-
-
... More
Aluminium anodized barrel tower bolt of extruded section of size 200 mm and fixed complete all as specified and directed.
12
-
-
... More
Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate all as specified.
2
-
-
... More
Floor door stopper of 140mm long of alluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed.
4
-
-
... More
Mild steel butt hinges of size 100 mm heavy weight cold rolled complete all as specified and directed.
1287
-
-
... More
Butt hinge of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
6
-
-
... More
Cast iorn ward rope hooks / Peg set of three (50mm to 60 mm) complete all as specified and directed.
2
-
-
... More
Galvanished mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanished wire staples complete all as specified and directed.
3
-
-
... More
Sheet glass 3 mm thick ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm each pane complete all as specified and directed.
1
-
-
... More
3 mm thick, figured glass pin head type and glazing with oil putty in squares n.exc 0.5 sqm each pane complete all as specified and directed.
0.5
-
-
... More
Mild steel framed work such as grills,gratings, manhole cover frames etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.
40446
-
-
... More
TMT steel bars 6 to 8mm dia as in reinforcement for concrete, cut to length, bent to shape requuired, including cranking, bending spirally for hooping for columns, hooping endand binding with MS wire (annealed) not less than 0.9 mm dia, complete all as specified
23308.5
-
-
... More
TMT steel bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape requuired, including cranking, bending spirally for hooping for columns, hooping endand binding with MS wire (annealed) not less than 0.9 mm dia, complete all as specified
538590
-
-
... More
All as per Srl item No 74 above but 5mm dia and over upto and including 10mm in stirrups, spacers and binders complete all as specified
78888
-
-
... More
Plain cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregates), 50mm thick as in plinth protection etc., surface finished even and fair without using extra cement all as specified.
37
-
-
... More
Non - skid Ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick bedding layer in cement mortar (1:4) complete all as specified and directed.
6.5
-
-
... More
Glazed ceramic coloured tiles of size 300mm x 200mm x 7 mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement plaster in cement mortar 1:4 complete all as specified and directed.
27
-
-
... More
Machine cut kota stone slab flooring 20-25 mm thick of size not less than 550 mm X 550 mm, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:4,; cutting, rubbing, grinding and polishing to achieve mirror finish complete, all as specified.
52
-
-
... More
Machine cut kota stone slab flooring 20-25 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in riser of steps, skirting, dado and pillar, laid over and including 15mm thick cement plaster in cement mortar 1:4,; cutting, rubbing, grinding and polishing to achieve mirror finish complete, all as specified.
8
-
-
... More
Rendering cement plaster 15mm thick in cement mortar 1:4 on fair faces of brick wall or on concrete surfaces, mixed with water proofing compound as per manufacturer's instructions, trowelled to even and smooth finish without using extra cement complete all as specified. (Note:- WPC will be measured and paid separately)
26.5
-
-
... More
Rendering cement plaster 20mm thick in cement mortar 1:3 on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified.
2080
-
-
... More
Rendering cement plaster 10mm thick in cement mortar 1:4 on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified.
692
-
-
... More
Rendering cement plaster 15mm thick in cement mortar 1:4 on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified.
8339.5
-
-
... More
Rendering cement plaster 15mm thick in cement mortar 1:6 on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified.
241
-
-
... More
5 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling surface finished even & smooth without using extra cement complete all as specified and directed .
86
-
-
... More
Supplying only Integral waterproofing compound
163.5
-
-
... More
Flush pointing to brick walls in cement mortar 1:3, complete all as specified.
37.5
-
-
... More
Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:3) on roof surface, finished even and smooth without using extra cement complete all as specified and directed.
338
-
-
... More
Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces of roof complete all as specified and directed.
338
-
-
... More
APP membrane minimum weighing 3 kg /sqm and minimum 3 mm thick reinforced with polyester non wove fabric( wt not less than 150 gm/sqm ) land on primed surface by forced application compete all as per manufacture instruction and as directed.
338
-
-
... More
Wire brusing & cleaning top surface of cement concrete, including flashings & junction of parapets, etc., & surface painting, with a layer of blown bitumen of any penetration applied hot @ 1.7 kg per sq. m. blinded with grit or pea size gravel @ 0.006 cu. m per sq. m, & lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and directed.
338
-
-
... More
Preparation of roof surface and applying two coats of aluminium paint over a coat of primer complete all as specified and directed.
338
-
-
... More
Preparation of wooden surfaces of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
16.5
-
-
... More
Preparation of steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
779
-
-
... More
Preparation of steel hidden surfaces of any description and applying two coats of red oxide primer complete all as specified and directed.
23
-
-
... More
Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
114
-
-
... More
Preparation of plastered or unplastered surface of ceiling and applying three coats of white wash complete all as specified and directed.
287
-
-
... More
Preparation of plastered or unplastered surface of walls and applying three coats of white wash complete all as specified and directed.
26
-
-
... More
Preparation of plastered or unplastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.
16093
-
-
... More
G I tubing medium grade of 15 mm bore with all fittings and fixtures fixed to wall and ceiling or laid in floor/trenches complete all as specified and directed.
20
-
-
... More
G I tubing medium grade of 20 mm bore with all fittings and fixtures fixed to wall and ceiling or laid in floor /trenches complete all as specified and directed.
12
-
-
... More
Wash basins, Vitreous China (Flat white type) size 630mmx450mm, crystal white with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with PTMT coupling nuts at both ends, trap, grating and Union for discharge pipe, waste, chain and plug and porcelain stopper, waste pipe of polythylene of low or high density or PVC of 32mm dia including 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed, complete all as specified.
2
-
-
... More
Pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe of bore 15 mm complete all as specified and directed
2
-
-
... More
Stop valves/ angle valve/ concealed valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure , screwed both ends for 15mm bore iron pipe or for unions and fixed complete, all as specified. Type of valve approved by the GE.
4
-
-
... More
Bib tap, cast copper alloy ,chromium plated, fancy type , screwed for iron pipe or for brass ferrule of 15 mm bore complete all as specified and directed.
2
-
-
... More
Gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed bore dia of pipe 20 mm complete all as specified and directed.
4
-
-
... More
Soap dish, Vitreous China white, approximate size 160x160x90mm complete all as specified.
2
-
-
... More
15mm bore, chromium plated, self cleaning water jet (Health Fuset) for EWC complete all as specified.
2
-
-
... More
PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.
4
-
-
... More
Grating doom 100mm size of PTMT (Minimum weight 25gms) complete all as specified and directed.
2
-
-
... More
Vitreous China wash down water closet (pedestal pattern), white including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC white seat cover and chromium plated jet including PVC connection, fixed complete all as specified.
2
-
-
... More
PVC valve less, crystal white, syphonic action type flushing cistern 10 litre capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long and 15 mm dia 600 mm long PVC connection with CP brass coupling nuts and PVC washers at both ends fixed all as specified.
2
-
-
... More
Cast iron 100mm bore Spun cast soil, waste pipes, in any length with or without ears with lead joints, laid in trenches or in floors complete all as specified and directed.
10
-
-
... More
Cast iron 75 mm bore Spun cast soil, waste pipes, in any length with or without ears with lead joints, laid in trenches or in floors complete all as specified and directed.
10
-
-
... More
Bend 100mm bore (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
2
-
-
... More
Cast iron floor trap 75 mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4 using 20mm graded crushed stone aggregate complete all as specified and directed.
4
-
-
... More
Rotational moulded polyethylene water storage tank 250 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line complete all as specified.
2
-
-
... More
Rolling and consolidating of formation surfaces in cutting with power roller 8 to 12 tonne capacity complete all as specified and as directed.
167
-
-
... More
Soling (or sub base) 150mm thick (spread thickness) with broken stone boulders or quarred stone, interstices filled, surface formed and rolled and consolidated with 8 to 10 tonne power roller to reqd gradient and camber complete all as specified and as directed.
167
-
-
... More
150mm thick (compacted thickness) in two equal layers of 75 mm thick each) water bound macadum with coarse aggregate (Granite, trap, Basalt) of grading 2 (63 to 40mm Size) spread, watered, rolled with 8 to 12 tones power roller to required gradient and camber complete all as specified and as directed.
167
-
-
... More
Preparation of unsurfaced WBM surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with power compressor to remove all loose dirt etc. complete all as specified and applying evenly a priming/tack coat with faving bituminous cold emulsion 10 Kg per 10 sqm of road surface and, laying Bituminous premix semi dence asphaltic concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix,laid with self propelling mechanical paver, rolled and compacted to required camber and gradient complete all as specified and as directed.
167
-
-
... More
75mm thick, PCC 1:3:6 type C-2, using 40mm graded crushed stone aggregate as in path, finished surface even and fair complete all as specified and directed.
1000
-
-
... More
Continuous brick edging with burnt clay bricks of sub class 'B' bricks laid dry on end vertically old size bricks complete all as specified and directed.
830
-
-
... More
Reinforced cement concrete pipe class NP-2 laid and jonted complete, bore of pipe 600mm complete all as specified and directed.
6
-
-
... More
Chequered cement concrete coloured tiles, homogenious texture glossy finished, chemically coated machine pressed 20 cm x 20cm x 25mm thick set, jointed and pointed in near cement slurry in floor with gray cement and pigment and including 15 mm thick cement screed in cement mortar 1:4 complete all as specified and directed.
1000
-
-
... More
Concrete bed to drain pipes laid to falls including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) for 300mm bore pipe complete all as specified and directed.
150
-
-
... More
Concrete bed to drain pipes laid to falls including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) for 150mm bore pipe complete all as specified and directed.
35
-
-
... More
Salt glazed stone ware (SGSW) grade 'A' drain pipes 300mm bore laid and jointed on concrete bed complete including testing complete all as specified and directed.
145
-
-
... More
Salt glazed stone ware (SGSW) grade 'A' drain pipes 150mm bore laid and jointed on concrete bed complete including testing complete all as specified and directed.
33
-
-
... More
LLDPE septic tank designed to carry sewage and sludge water, comprising earth work , excevation, returning filling, disposal of surplus spoils to a distance not exc 50 mtr from starting point in any type of soil, PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in foundation, 200 mm thick, vent shaft, connections etc.for 25 users (4000liter capacity) including all fittings, fixtures, testing on completion complete all as specified.
1
-
-
... More
Construction of soakage well 3.00 meter internal dia x 4.50 meter effective depth including earth work in any type of soil, foundation in PCC 1:3:6, brick wall of honey combed with top ring of M-25 (Design Mix) using 20mm graded crushed stone aggregate concrete, form work, reinforcement including intercepting chamber and screen chamber made of brick masonary in CM (1:4) , RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC pipes, bends and fittings Complete, filled with brick bats complete all as shown on drgs,specified and directed .
1
-
-
... More
Point wiring with 1.5 Sqmm copper conductor FRLS (Multistrand) PVC insulated unsheathed cable in and including PVC concealed conduit not less than 20mm dia and 2mm thick, medium grade with IS 9537 (Part-III) 1983 marking with all fittings/ accessories as specified in preamble 1 (a) to (q) of Section 19 of SSR Part-II, under heading point wiring and also including PVC insulated unsheathed 1.5 Sqmm copper multistranded conductor FLRS as earth wire (green colour) connected to common earth dolly and including pressed steel terminal boxes made out of 1.20 mm thick mild steel sheet duly painted with one coat of red oxide primer for mounting of switches, sockets, fan regulators, light fittings etc. covered with 3mm thick plastic laminated sheet (ISI marked) for one light point or one fan point or one fan point through regulator or one bell point, controlled by one way switch/ push button complete all as specified and directed.
6
-
-
... More
All as per serial item No '133' above, but for one 3 pin 5 Amps socket outlet on the same board all as specified and directed.
23
-
-
... More
Switch piano flush type, single pole, one way, 5 Amps, all as specified.
29
-
-
... More
Switch piano flush type, single pole, one way, 15 Amps, all as specified.
7
-
-
... More
Socket outlet two and three pin, 5 Pin, 5/16 Amp flush type controlled by one switch, all as specified.
7
-
-
... More
MCB SPN 6 to 32 Amp, 240 Volts, 10 KA all as specified.
6
-
-
... More
MCB SP 6 to 40 Amp, 240 Volts, 10 KA all as specified.
40
-
-
... More
Sub main wiring with two single core PVC insulated cable 1100 volts grade with copper stranded FRLS conductor of size 1.5 Sqmm (2 single run) with one continuous FRLS copper earthing lead wire of size 1.5 Sqmm and drawn in and including 25 mm dia PVC conduit having wall thickeness not less than 2 mm thick concealed type medium grade with all accessories and connected to common earth dolly complete and as directed. Note :- Two run (each run of 1 RM) of 1.5 sqmm copper conductor and one RM of earth wire of 1.5 Sqmm, shall be measured as one RM).
120
-
-
... More
Sub main wiring with two single core PVC insulated cable 1100 volts grade with copper stranded FRLS conductor of size 4 Sqmm (2 single run) with one continuous FRLS copper earthing lead wire of size 4 Sqmm and drawn in and including 25 mm dia PVC conduit having wall thickeness not less than 2 mm thick concealed type medium grade with all accessories and connected to common earth dolly complete and as directed. Note :- Two run (each run of 1 RM) of 4 sqmm copper conductor and one RM of earth wire of 4 Sqmm, shall be measured as one RM).
30
-
-
... More
LED tube lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
18
-
-
... More
LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.
4
-
-
... More
LED light fitting 1x9W/1X10W bulkhead luminaires (6500k) including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. all as specified.
23
-
-
... More
Exhaust fan steel body 300 mm sweep with double bearing AC 230/240 Volts heavy duty 900 RPM complete with louvers, shutters, arrangement for wall mounting including grounting, holding down bolts, nuts, washers & provision of flaxible copper conductor cable three core 23/0.0076 size from ceiling rose to fan and PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) grounting complete all as specified
2
-
-
... More
Ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor with provision of cable 3 core flexible copper conductor 23/0.0076 from ceiling rose to ceiling fan including fixing and connecting up of fan regulator complete all as specified.
4
-
-
... More
Flush type, step fan speed controller suitable for 1200/ 1400 mm sweep ceiling fan complete all as specified and directed.
4
-
-
... More
MCB DB sheet metal enclosure single pole and neutral 12 way, 240V with 200 Amp bus bar and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated Acrylic double door complete confirming to IP 42 complete all as specified and directed.
3
-
-
... More
MCB DB sheet metal enclosure single pole and neutral 8 way, 240V with 200 Amp bus bar and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated Acrylic double door complete confirming to IP 42 complete all as specified and directed.
1
-
-
... More
MCB DB sheet metal enclosure single pole and neutral 4 way 240V with 200 Amp bus bar and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated Acrylic double door complete confirming to IP 42 complete all as specified and directed.
2
-
-
... More
Supply, laying ,jointing and testing, laid in trenches/road crossing/under floor/on walls/on poles including clamps or passing through pipes 1100 volts grade XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor of cross sectional area 300 Sqmm,3.5core complete all as specified and directed.
35
-
-
... More
Supply, laying ,jointing and testing, laid in trenches/road crossing/under floor/on walls/on poles including clamps or passing through pipes 1100 volts grade XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor of cross sectional area 70 Sqmm,3.5core complete all as specified and directed.
350
-
-
... More
Supply, laying ,jointing and testing, laid in trenches/road crossing/under floor/on walls/on poles including clamps or passing through pipes 1100 volts grade XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor of cross sectional area 50 Sqmm,3.5core complete all as specified and directed.
850
-
-
... More
Supply, laying ,jointing and testing, laid in trenches/road crossing/under floor/on walls/on poles including clamps or passing through pipes 1100 volts grade XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor of cross sectional area 25 Sqmm,2core complete all as specified and directed.
100
-
-
... More
Supply, laying ,jointing and testing, laid in trenches/road crossing/under floor/on walls/on poles including clamps or passing through pipes 1100 volts grade XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor of cross sectional area 10 Sqmm,2core complete all as specified and directed.
1200
-
-
... More
Supply, laying ,jointing and testing, laid in trenches/road crossing/under floor/on walls/on poles including clamps or passing through pipes 1100 volts grade XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor of cross sectional area 6 Sqmm, 2core complete all as specified and directed.
600
-
-
... More
GI Light grade pipe of size 80mm bore dia galvanized with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.
10
-
-
... More
GI Light grade pipe of size 50mm bore dia galvanized with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.
50
-
-
... More
Sand cushioning for underground cable 8cm before laying the cable and 15cm after laying and stretching the cable and pulling down to 18cm for measurement complete all as specified and as directed.
230
-
-
... More
Sub class 'B' bricks, well burnt as in mechanical protection to cable, laid dry, flat with width equal to the length of brick complete all as specified and directed.
22720
-
-
... More
Earthing complete with galvanised steel earth plate electrode 600mmx600mmx6mm thick buried directed in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level) connected to and including galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts nuts, check nuts and washers of galvanised iron including PCC 1:2:4 in pit, angle iron 25x25x3mm frame work with precast RCC 1:2:4 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12 mm dia MS fabricated handle, medium grade GI watering ipe 20mm bore with funnel, wire mesh and light grade GI protection pipe 40mm bore upto 5m length for drawing in earth lead wire, salt, charcoal, etc. Including excavation and earth work in any type of soil, removal of surplus spoil to a distance not exc. 50m complete all as shown in electrical plate No 3 of MES schedule 2009 (Pt-I) and connected to main control board all as specified including testing on completion.
2
-
-
... More
Earthing complete with galvanised steel earth plate electrode 600mmx600mmx6mm thick buried directed in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level) connected to and including galvanised strip 32x6mm by means of bolts, nuts, check nuts nuts, check nuts and washers of galvanised iron including PCC 1:2:4 in pit, angle iron 25x25x3mm frame work with precast RCC 1:2:4 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12 mm dia MS fabricated handle, medium grade GI watering ipe 20mm bore with funnel, wire mesh and light grade GI protection pipe 40mm bore upto 5m length for drawing in earth lead wire, salt, charcoal, etc. Including excavation and earth work in any type of soil, removal of surplus spoil to a distance not exc. 50m complete all as shown in electrical plate No 3 of MES schedule 2009 (Pt-I) and connected to main control board all as specified including testing on completion.
10
-
-
... More
Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including making necessary connection with suitable copper cable complete all as specified and directed.
18
-
-
... More
GI tubing bracket of 40 mm dia, light grade 1.2 mtr long having 120 degree angle and fixed on pole including clamps, nut, bolts and washer for fixing of security light complete all as specified and directed.
18
-
-
... More
Supply and fixing LED flood light 170 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp including making necessary connection with suitable copper cable complete all as specified and directed.
6
-
-
... More
Supply and fix glass fiber reinforced UV protected poly carbonate junction box IP-66/67 dust/water proof, with knockouts for cable entry of size 10-16 sqmm cable to mounting on the street light pole of size 155mm x 210mm x 92mm complete with 01 No MCB SP 10 Amps and four no Al bus bar with provison of cable glands and necessary clamps to fix on tubluar pole all as specified and directed.
18
-
-
... More
Supply & installation, testing and commisioning of LT panel board outdoor type floor mounted having independent compartment for bus bar incoming feeder and each out going feeders, dust and vermin proof factory made , fabricated outdoor type of 3.15 mm thick CRCA sheet suitbale for 3 phase , 415 volts 50 Hz AC supply, bus bar chamber with aluminium bus bar 600 Amp rating for 3 phase and 4 wire system duly insulated with heat shrinkable type sleeves as per colour code comprising of folowing:-
(a) MCCB 4 pole 350 Amps, 415 Volt, 50 Hz, 35 KA-01 Nos. (Incoming)
(b) MCCB 3 pole 250 Amps, 415 Volt, 50 Hz, 25 KA-01Nos. (Outging) (c) MCCB 3 pole 100 Amps, 415 Volt, 50 Hz, 16 KA-01Nos. (Outging)
(d) Digital Voltmeter 0-500 V with selector switch-01 Nos.
(e) Digital ammeter with selector switch 0-500 Ams & CT ratio 400/5 Amps -01 Nos.
(f) RYB indicating LED lamp for main supply 03 Nos-01 set.
Note: (i) The panel shall be front operated with cable entry from te bottom with cable glands. The faul with standing capacity shall be 50 KA & earth bus shall be part of the LT panel.
(ii) Fabrication of panel box to be done by CPRI approved manufactrer.
(iii) Cost of earth work and construction of platform for panel, brick masonary in cement mortar 1:6 withfoundation PCC 1:4:8 type D-2 including plaster work, PCC coping 1:2:4 (20mm thick curshed stone aggregate), deemed to be included in this item rate.
1
-
-
... More
Supply & installation, testing and commisioning of LT panel board outdoor type floor mounted having independent compartment for bus bar incoming feeder and each out going feeders, dust and vermin proof factory made , fabricated outdoor type of 3.15 mm thick CRA sheet suitbale for 3 phase , 415 volts 50 Hz AC supply, bus bar chamber with aluminium bus bar 200 Amp rating for 3 phase and 4 wire system duly insulated with heat shrinkable type sleeves as per colour code and proper vantilation comprising of folowing:-
(a) MCB TPN 16 Amp, 415 Volt , 50 Hz, 16 KA-01 Nos. (Incoming)
(b) MCB SPN 20 Amp, 230 Volt, 10 KA -04 Nos (outgoing). (c) Digital ammeter with CT ration 200/5 Amps with selector switch-01 No.
(d) Digital voltmeter 0-500 V with selector switch-01 No.
(e) LED indicator lamp with holder 03 Nos-01 set.
(f) Timer switch with contactor 16 AMps-01 set.
(g) Connector with suitable size bus bar
Note: (i) The panel shall be front operated with cable entry from te bottom with cable glands. (ii) Fabrication of panel box to be done by CPRI approved manufactrer.
(iii) Cost of earth work and construction of platform for panel, brick masonary in cement mortar 1:6 withfoundation PCC 1:4:8 type D-2 including plaster work, PCC coping 1:2:4 (20mm thick curshed stone aggregate), deemed to be included in this item rate.
1
-
-
... More
Supply & installation, testing and commisioning of LT panel board outdoor type floor mounted having independent compartment for bus bar incoming feeder and each out going feeders, dust and vermin proof factory made , fabricated outdoor type of 3.15 mm thick CRA sheet suitbale for 3 phase , 415 volts 50 Hz AC supply, bus bar chamber with aluminium bus bar 200 Amp rating for 3 phase and 4 wire system duly insulated with heat shrinkable type sleeves as per colour code and proper vantilation comprising of folowing:-
(a) MCB TPN 16 Amp, 415 Volt , 50 Hz, 16 KA-01 Nos. (Incoming)
(b) MCB SPN 20 Amp, 230 Volt, 10 KA -03 Nos (outgoing). (c) MCB SPN 63 Amp, 230V, 10KA - 01 No (Otgoing)
(c) Digital ammeter with CT ration 200/5 Amps with selector switch-01 No.
(d) Digital voltmeter 0-500 V with selector switch-01 No.
(e) LED indicator lamp with holder 03 Nos-01 set.
(f) Timer switch with contactor 16 AMps-01 set.
(g) Connector with suitable size bus bar
Note: (i) The panel shall be front operated with cable entry from te bottom with cable glands. (ii) Fabrication of panel box to be done by CPRI approved manufactrer.
(iii) Cost of earth work and construction of platform for panel, brick masonary in cement mortar 1:6 withfoundation PCC 1:4:8 type D-2 including plaster work, PCC coping 1:2:4 (20mm thick curshed stone aggregate), deemed to be included in this item rate.
1
-
-
... More
Supply, erecting and fixing steel tubular swaged poles type 410 SP-31, 09meter long, complete with cast iron base plate, final taper plug, bolts, nuts and screws as specified including painting with two coats of aluminium paint over one coat of red oxide primer and 06 Nos bands/ straps with white and red post office box colour (30 cm wide each) synthetic enamel paint at a distance 30 cm from plinth block and numbering of poles with black synthetic enamel paint in 2.5 cm height including black bitumineous paint two coats on steel surface embedded in concrete foundation complete all as specified and directed. (Excavation and earth work, PCC foundation concrete shall be measured and paid separately)
18
-
-
... More
Supply, laying and testing Steel water tubing "medium grade" Galvanized with screwed and socket joints, with all fittings such as tees, bends, unions, elbows, reducers etc laid in trenches of bore 80 mm, complete, all as specified.
26
-
-
... More
Supply, laying and testing Steel water tubing "medium grade" Galvanized with screwed and socket joints, with all fittings such as tees, bends, unions, elbows, reducers etc laid in trenches of bore 50 mm, complete, all as specified.
100
-
-
... More
Supply, laying and testing Steel water tubing "medium grade" Galvanized with screwed and socket joints, with all fittings such as tees, bends, unions, elbows, reducers etc laid in trenches of bore 25 mm, complete, all as specified.
50
-
-
... More
Construction of brick masonery valve pits of size 900x900x900 mm (internal diamension) with brick work in cement mortar (1:4), plastering all wall surfaces internally and flush pointing to brickwork externally as the work proceess complete including excavation and earth work, concrete work, including angle iron 50x50x6mm frame, MS sheet cover 3.15 thick with 12mm dia handle, locking arrangement and painting with two coas of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as shown on drg No CEUZ/TD/1500/15 amended upto date complete as specified and directed.
1
-
-
... More
Construction of brick masonery valve pits of size 600x600x600 mm (internal diamension) with brick work in cement mortar (1:4), plastering all wall surfaces internally and flush pointing to brickwork externally as the work proceess complete including excavation and earth work, concrete work, including angle iron 50x50x6mm frame, MS sheet cover 3.15 thick with 12mm dia handle, locking arrangement and painting with two coas of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as shown on drg No CEUZ/TD/1500/15 amended upto date complete as specified and directed.
3
-
-
... More
Rotational moulded polyethylene water storage tank 10000 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with PVC float valve of suitable diaa with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections complete all as specified.
1
-
-
... More
Supply, installing, commisioning & testing of Diesel Engine driven Generator set of 20 KVA with AMF panel complete with suitable acoustic enclosures all as per central pollution control board guide lines, 50 cycle per second with 0.8 power factor, engine as per IS-10001/10002 and alternator as per IS-13364 complete. The alternator of rating 20 KVA of Generator set shall be directly coupled with Diesel Engine mounted on common base plate with alternator and all as specified and comprising of the following:-
1
-
-
... More
A. Engine
Inline type, 4 cylinder diesel engine of of suitable BHP rating at 1500 RPM as per ISO 3046/BS-5514/649 or 10002 direct injection type with turbo charger & water cooled engine electric starting system, arrangement of starting and the engine shall be capable of running 12 hours continiously and with 10% of overloading for one hours in each 12 hpurs running. The engine recommendations. Engine shall be directly coupled with alternator mounted on common base plate with the following:-
(a) 1 Nos 12 volts 100 AH batteries with battery charger. The battery charger shall be able to charge the battery at all time whenever electric supply is given to battery charger through control panel.
(b) Heavy duty industrial silencer.
(c) Fly wheel with coupling bolts.
(d) Lub oil filter.
(e) Instrument panel comprising of microprocessor based controller for measuring paramenters like coolent temperature, Running hours, lubricating oil pressure etc.
(f) Engine speed mechanical /easy governor class A, Governing as per BS 5514 (g) Air filter (Dry type)
(h) Turbocharger of suitable capacity
(i) Gear pump for forced feed lubrication
(j) Fuel injection Pump
(k) Fuel filter double bowl
-
-
-
... More
(l) Raditors
(m) Flexible rubber coupling
(n) Set of fuel pipes of suitable length
(o) Base plate
(p) Fuel tank capacity as per manufacturer design with all connecting pipe & fabricated MS stand including level gauge.
(q) Anti vibrating pads& mounting for the genertors set, Engine and alternator
(r) Legging of exhaust manifold with asbestos rope to exposed pipes
(s) Flexible exhaust pipe with end flanged of suitable size.
-
-
-
... More
B. Alternator Alternator of rating capacity (20 KVA) & capable to take 10% extra load at every 12 hours interval for one hours, 3 phase, 4 wire, 50 Hz, 415 volts, 0.8 power factors. 1500 RPM self excited self regulated required to be coupled with above engine. The alternators shall be comforming to IS-4722 & IS-4728 as per following specification.
(a) Type: Sailent poles, single bearing brushess type suitable for direct coupling to engine.
(b) Rating: Guaranted to deliver required output at the ambient temp conditions. Suitable for an over load of 10% 1 hour in every 12 hours operations.
(c) Voltage Regulation: Provided with fast response thyristors type electronics automatic voltage regulators, which holds output voltage with in desired limits. (+/-1%)
(d) Self excited- self regulated
(e) Alternator loading: Suitable for taking rated load immediately after machines reaches rated voltage and speed.
(f) Vibration: Suitable for direct coupling with engine and mounted on common MS Channel base frame.
(g) Enclousures: Screen protected drip proof enclosure with IP-23 Degree of protection.
(h) Cooling: Liquid cooled type.
(j) Control panel shall be provided with suitable PC controller and digital display for measuring of line/phase voltage/currents, frequency etc.
C. AMF Panel (i) Standard control panel for DG set shall be made of fabricated sheet cubical type with front hinged cover, wtih microporcessor based controller with folllowing features:-
-
-
-
... More
(a) State of the art compact microposseor based fully configurable technology.
(b) Integration of all engine and alternator parameters.
(c) For ease of viewing, high performance graphical LCD and prominent display.
(d) Event logging history for easy of maintenance/service.
(e) Capability of with standingwide range of operating temp.
(f) Individual touch bottons for manual, auto and test mode.
(g) LED indications for genset status and alarms.
(h) Battery conditins monitoring.
(j) Statistical cumulative counters like, No of starts, Engine run Hrs, Kwh.
(j) Setting provision for different parameters on front panel.
(k) Two nos microprocessors based, MCCB 63 Amps, 16 KA breaking capacity, one for main supply and other for DG set supply.
(l) Two nos contractors of suitable capacity for main & DG.
(m) AI bus bars of 400 Amps capacity provided with termination. (ii) Display Parameters
(a) Electrical parameters: Phase voltage, line current, frequency, average voltage, average current, KW, KWH, KVA, KVAR, Power factor, earth fault current.
(b) Mechanical Parameters: Lube oil pressure coolant, Temp, Engine speed, Fuel status, Engine run hours, Battery Voltage.
(iii) Protection:
(a) Electrical protections: Under/over voltage,under/over frequency, phase failure. Phase seqencer reverse, over current, over KW.
-
-
-
... More
(b) Mechaical protections: Under/over spped, low lube oil pressure, High engine coolant temp, Low fuel level alarm, start/stop fail, charging alternator fail.
(c) Cable entry gland plate without cable glands.
D. Foundation
DG Set shall be installed on new foundation block as per manufactures recommendations including excavation works PCC etc for foundations, provision of cable ducts, making good any damage to existing structure, fuel piping from fuel tank to generator set with medium grade GI tubing and cold water piping system (Medium grade GI tubiing from nearest water point to radiator of engine with brass tap and stop cocks and fittings complete connecting the existing earthing strips to control panel, DG set and generator.
-
-
-
... More
Supply, installation, commissioning of Water cooler fully stainless steel, electric driven single phase having storage capacity of 80 litre and nominal cooling capacity of 40 Litres per hour complete all as specified and directed.
1
-
-
... More
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2 KVA complete all as specified and directed.
1
-
-
... More
FICS (Fiber Impregnated in Concrete Slurry) panels of size 1m x 2m x 0.08m (thick), each panel in three parts as specified, fixed using chemical mortar cartridges ( Make TRUTEK/HILTI/FISHER) and chemical anchor bolts SS304, 350mm long with M24 or above with TCM 400 PE ( Make TRUTEK/HILTI/FISHER), all as shown in drawing(s) and/as specified complete including testing of 2 No. panels from TBRL Chandigarh. FICS panels shall be as per Baffle Ranges Manual, 2020 and shall meet all the test requirements mentioned therein. NOTE:- The quantity of panels as incorporated in the work only shall be measured & paid. The cost of 2 panels, their packing, transportation & testing as specified shall be deemed included in the unit rate quoted against this item.
389
-
-
... More
Supply and fix 5mm thick aluminium sheet including necessary fixing arrangement complete all as directed.
235
-
-
... More
Supply and filling gravel of size exceeding 9mm but not exceeding 20mm complete all as directed.
493
-
-
... More
Supply and fix rubber lining , 10 to 12mm thick self sealing rubber complete all as per Baffle Range Manual, 2020 and TBRL Chandigarh instruction and shall meet the test requirements mentioned therein.
8571
-
-
... More
Supply of farm yard manure (FYM), sand and good soil (Quantity of FYM 40 kg per pit, sand 5 Kg per pit and soil as required per pit as per direction of Horticulture Deptt Kangra at Dharamshala) complete all as directed.
Note:- (i) Density of manure considered at 500 Kg/Cum (ii) Density of sand considered at 1600 Kg/Cum
210
-
-
... More
Supplying of insecticides Chloropyriphos 8ml/Ltr water i.e. 40 ml/Ltr water per pit as per direction of Horiculture Deptt Kangra at Dharamshala complete all as directed.
108
-
-
... More
Mixing of sand, farm yard manure, earth and insecticide diluted with water and returning filling, ramming the mix into pit including levelling and well ramming complete all as directed .
329
-
-
... More
Supply and plantation of doob grass with salexon No 1 grass by dibbling root method all as detailed below and as specified and maintenance of the ground till the grass forms a thick lawn face from weeds and fit for
Note:- (a) Ploughing of whole site in soft /ordinary soil up to depth of 20 cm and revoving all the unwanted material such as
(b) Dressing and levelling the soil (i) Manure: Old cow dung or okhla sludge at the rate of 2.25 cubic feet for 10 Sqm. (ii) Fertilizers :- (aa) Neem kholi @ 2 kg per 10 Sqm (bb) Benemeal @ 1 kg for 10 Sqm (iii) DA (16.42) @ 0.15 kg for 10 Sqm (iv) BHC dust 10% or pin dance dust @ 0.15 kg for 10 Sqm (v) Weedicide @ 0.01 for 10 Sqm Note:- The manure and fertilizers to a required to be mised evenly upto maximum depth of 15 cm. (c) Fine dressing of tup soil after mixing of manure and fertilizers to a required slope.
(d) Watering of the area after fine dressing of soil after putting water upto 10 to 15 cm deep,
(e) Final dressing of top surface of soil to required slope and gradient towards th manholes.
10781
-
-
... More
Deduction to be made from BOQ for Sch 'A' Part-II (Schedule of credit) Amont of Rs. 34,96,580.00 during AOC.
Note: Tenderers shall not quote for this schedule.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%