Jammu And Kashmir State Industrial Development Corporation Tender

Supplying/Errection/Testing/ Commissioning of 250 KVA Distribution Substation

S/E/T/C of 250 KVA Distribution substation in the premises of CFC Building at Industrial Growth Centre Samba Phase-III a)250 KVA Distribution Transformer 11/433 KVA Level-2 copper wound with filling of fresh T-oil as required -1No b)P/F of steel tubular pole 410-SP-33 the pole shall be amount which shall be painted with red oxide & two coats of simmer paint cemented upto 5 feet in the ratio of 1:3:6 with 1 feet of Muff above the grand level with surface plastering etc. as required - 2 Nos. c)Gapless surge arrester 9 KV, 10KV L.A with polymer/ porcelain Housing station type- 1Set d)11 KV G.O AB Switch 3 3 pole 400A – 1 Set e)11 KV DO fuse 3 phase 400 Amp – 1 Set f) 11 KV Disc insulators (Polymer/ Porcelain) complete with fitting (45 KN) – 3 No. g) GI Chanel/ Angle/ Flat of size including damps – 200 Kg. h)11 KV Pin insulators (polymer/porcelain) with pins (5 KN) – 3 No. i) Galvanized stay set with 50 x8 mm stay clamp, guy insulator (2 Nos)

Anchor plate ( 200x 200 x 6 mm) Nut Bolts 2 No. turn Buckles 1.8m long 16 mm Dia meter solid GS stay rod 2 7/3.15 mm Dia GI stranded wire complete -2 Set. j) Wedge connector/ PG clamps – 6 Nos. k) P/F of 1x 240 unarmored Aluminum cable with thumbing to end terminals – 15 Mtr. l) Galvanized Nut & Bolts – 8 Kg. m)Danger plate with clamp – 1 No. n) G.I Barbed wire for Anti climbing- 15 Kg. o) 3 Phase & 4 wire trivector meter with C.T/P.T for metering – 1 Job. p) P/F of 0.05 ACSR Conductor – 10 Mtr q) P/L of Chemical earthing with Main Holes -3nos r) P/F of 25 x 5 mm G.I strip on surface or in recess for connection etc as required. s) Sundry items like Aluminium lugs, Jumpess Binding tape etc - LS t) P/F of fuse link Bus Bar on Angle iron for protection of transformer – 1 No. u)Tapping point for 250KVA Distribution Substation comparing of insulator conductor, Disc and all allied accessories – 1 No