Jammu And Kashmir State Agro Industries Development Corporation Limited Tender

Performance and Endurance Test Rig for Foot and Rocker Sprayer as Per BIS Standard Mounted on M.S. Structure dully powder coated. The Unit should comprise of Foot or Rocker pump mounted on MS Frame for Testing, Pressure gauge accumulator for reducing damping effect of pressure gauge, Suction pipe & discharge pipe, ½ HP Gear motor for constant stroke speed, Hand valve arrangement for changing pump, Sump & Measuring Tank, Main Switch, Stop clock

Strap Drop and Tank Impact Test rig as per BIS Standard Mounted on M.S. Structure dully powder coated. Unit should Comprises of M. S. Metallic Fabricated Frame, Double Acting pneumatic Cylinder’s 3 No., Canti Leaver Assembly, Belt Assembly, Test Tank Assembly, Limit switch, Pressure gauge, Flow Control Valve, Electro Pneumatic Solenoid Valve Air Compressor

Test Rig for Fatigue on Compression Sprayer as per BIS Standard Mounted on M.S. Structure dully powder coated. The Unit should Comprise of M.S. Fabricated Stand, Air Compressor single cylinder single phase, Air filter, Solenoid Valve, Three way valve, Limit switch, Pneumatic cylinder, Digital counter for stroke measurement with timer, Pressure Gauge, Three separate line for three Nozzle

Test Rig for Trigger Type cut off device (As Per BIS Standard) Mounted on M.S. Structure dully powder coated. The Unit should Comprise of M.S. Fabricated Frame 1000 X 700 X 1500 approx., Air Compressor Single Cylinder Single Ph , Single acting Pragmatic Cylinder, Pressure Regulator, Pressure Gauge, Limit Switch, Electrical Cut Out (6A) Solenoid Switch, Spray Nozzle, Unit Will Powder Coated, STP Pump with Pipe Assembly

Spray Launce Pressure Test Rig (as per BIS Standard) Mounted on M.S. Structure dully powder coated. The Unit should Comprises of M. S. Fabricated Stand Assembly, 1 HP DC Motor, 4 A, DC Dimmer Assembly, Cam and Flange Assembly, Connecting rod Assembly, Electrical Switch, Air Foot Pump

Reciprocating Pump Test Bench (as per BIS Standard) Mounted on M.S. Structure dully powder coated. The Unit should Comprises of Reciprocating Pump of 1 HP single phase 1500 rpm with a 4A dimmer stat, Vacuum Gauge at suction line, Pressure Gauge at Discharge line, Measuring input to elect Motor by Energy meter, Output of Pump performance can be estimated at three different speed by using pulley, Recirculation type unit, M. S. Stand Assembly, Measuring Tank of Size : 500 x 400 x 400mm with FRP Coated, M.S. sump Tank 900 x 600 x 600mm

Test Set Up of Mist Blower Mounted on M.S. Structure dully powder coated Round type duct, Pitot Tube, U Tube manometer, Blower switch, Single phase 3/4 HP centrifugal blower, Orifice meter

Spray Pump Test Rig for Centrifugal Pump Mounted on MS Structure duly powder coated. The unit should consist of Multi stage Centrifugal pump, Vacuum gauge at suction line, Pressure gauge at discharge line, Input measured by three phase energy meter, Output of pump performance can be estimated at 3 difference speed by using V belt pulley, Three HP AC Motor with starter, MS tank of size : 1000 x 800 x 600mm with FRP Coated, Measuring Tank of size : 600 x 500 x 400mm with FRP Coated

Leakage Test For Delivery Line Mounted on M.S. Structure dully powder coated comprises of : 1 HP HTP Pump, • 3 phase 1500 rpm Motor with starter, Air compressor assembly, Air filter, Pressure gauge, regulator with pressure gauge, Pneumatic cylinder, Solenoid Valve, limit switch, Nozzle sprayer assembly, Sum Tank, Hand valve, Separate line for leakage purpose

Hand Arm & Whole Body Human Vibration Meter Including 1/1 & 1/3 Octave Analysis Includes: SC 56 USB cable, 4 x AA batteries, SC 118 integrated connector, 1/1 & 1/3 Octave Analysis, SV 105 Hand-Arm adapter with triaxial accelerometer, SV 38V Whole-Body seat accelerometer, Micro SD card 2GB, CD with instruction and Software and Carrying Case.

Test facility for Chemical composition of Soil engaging of Components (Multi CCD Spectrometer) Spectra Analytical Resolution: 3600 lines/mm and above Focal length: 300mm or above Number of detectors (CCD): 5 or above. Calibration required: Fe base MS/C/LAS & CI/SG iron alloys, SUS Samples Included Online Service Support: Java.net online service Standardization: Single sample, Power Consumption: 30W Standby 800W Sparking or equivalent Items to be included: Grinder for Spectrometer, Argon Regulator, Online UPS 2KVA with 1 Hr Backup and Core i5 complete desktop with suitable OS, 4GB RAM, DVD Writer, 1TB HDD,DVD, Monitor: 21” wide LED TFT, Keyboards, optical mouse, Windows 7/8/8.1 Professional pre-loaded, Preloaded software, Antivirus (latest version), online UPS 2KVA with 1 Hr Backup suitable Licensed Windows 7 or above Software. Ink jet colour printer USB 2.0/3.0 Port Cooling System: 1.5 Ton split AC dual cooling and hot with Installation and 4 KVA Stabilizer

Computerised engine test set-up for testing of engines of self propelled machines Computer based engine test rig for test of various engines used in self propelled agricultural machinery 5-6 hp capacityEngine : 4 stroke single cylinder diesel engine 5 hp and 2 stoke petrol engineDynamometer : The Engine is coupled with matching Eddy current dynamometer and capable to couple with 4 stroke diesel engine and 2 stroke petrol engine with required accessories.Torque Measurement: With Load Cell.1. Eddy Current Dynamometer (Water Cooled)• Rated absorption Power = 5 KW / 6.7 HP• Maximum torque = 15 Nm or More.• Maximum Torque at Speed = 2500 RPM• Maximum speed = 12000 RPM• Torque measurement precision = ± 0.25 FS%, 0.1 Nm resolution• Speed measurement precision = ± 0.5 FS %, 1RPM resolution• The direction of rotation both Clockwise & Anti Clockwise.• Reaction type Torque Sensor to measure Torque, having 2 mV/V output.• 60 - Tooth wheel with magnetic pick up sensor to measure speed.• Torque calibrating arms and weights• Electro-less Nickel plating on water passages (groove side) of loss plates to ensure that corrosion does not detract from performance.• Magnetic heavy duty water strainer - filter.• Water Inlet Pressure Switch.2. Dynamometer Controller:(Control Panel mounting stand on ground floor), Consisting of:• Dynamometer Multi Mode Control Unit• Pot for variable loading of Engine.• Multi-mode operation push buttons facilitating• Constant Speed• Constant Torque &• Open Loop modes of operation.• Size of rack: 19” Rack type.• The controller would be provided with SET OVERSPEED• facility, SET RUNMODE Selection and RESET / START & STOP switch.• Analogue/Digital Speed Indicator & Digital Torque Indicator Rack• Accuracy: Analogue speed: ± 1.5% of FSD• Digital torque: ±0.25% of FSD ; Digital speed: ± 1 rpm• An Isolator Switch Panel• 2 Nos. Blind Temps. Controllers as inbuilt safety against overheating of loss plates of the dynamometer• PID Temperature Indicator Controller to indicate Engine Lub Oil Temp. &Air Intake Temp, Fuel Temperature, Dynamometer Water Outlet Temp (All 0 - 200ºC) with Temp Sensors PT 100: Qty. 4 Nos.• Exhaust Gas Temp (0 - 1000ºC) – 1 No. Temp Indicators with CRALsensors.• Air Intake Pressure Indicator with Sensor ( 0 to 70 mbar) :Qty. 1 No.• Engine Exhaust Back Pressure Indicator with Sensor (0 to 70 mbar) Qty. 1 No.• Digital Time Totalizes - 1 No.3. Data Logging Facility: PC Based, Data Acquisition & Control system. Consisting of:Computer: Intel core i5 processor, 3.00 GHz or more, Intel stable image platform program (SIPP), Memory: 8 GB, Hard disk drive: 1 TB HDD, Monitor: 21” wide LED TFT, Keyboards, optical mouse, Windows 7/8/8.1 Professional pre-loaded, Preloaded software, Antivirus (latest version), 3 years comprehensive H/W warranty, complete with HP inkjet Color Printer. PCI Card with necessaryDigital & Analogue inputs & outputs. Facility to View / Print observation table and save the acquired data .• Software package for logging the engine test results.4. Cable loom with conduit of 10Mtr length: Cable loom consist Shielded Control cables for Torque sensor, Speed sensor, Temp & Pressure sensors & Dynamometer Control, with Male-female round type connectors with flexible conduit of length of 10Mtr.5. Suitable Engine Mounting Stand on Common Base Frame for Engine & Dyno.6. Torsion Coupling: Between Engine & Dynamometer with Guard.7. Volumetric Fuel Consumption unit along withCalibration Set Up:Glass tube assembly (5 + 10 cc) is housed in MS fabricated enclosure with top and bottom supports. Photo sensors are fitted on Glass tube, to regulate specific volume of fuel required during testing.Digital timer (with suitable interface to connect with PC based system) is provided for indication time in seconds for the selected volume of fuel.INSTRUCTION MANUAL:Technical manual which describes the equipment and experimental procedureLeast count of timer is 0.1 second. Measurement Accuracy: 0.5% of selected volume whichever is more quantity.3 years hardware and service warranty at SKUAST-J, JammuInstallation: Installation, Mounting & Erection, Wiring, Commissioning and necessary civil work etc. will be done by the supplier.INSTRUCTION MANUAL:Technical manual which describes the equipment and experimental procedureLeast count of timer is 0.1 second. Measurement Accuracy: 0.5% of selected volume whichever is more quantity.3 years hardware and service warranty at SKUAST-J, JammuInstallation: Installation, Mounting & Erection, Wiring, Commissioning and necessary civil work etc. will be done by the supplier.INSTRUCTION MANUAL:Technical manual which describes the equipment and experimental procedure