Floriculture Department Tender

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete TMT bars

Centring and shuttering including strutting, propping etc. and removal of form work for:-

Foundations, footings etc

Supply fabrication including erection at all heights and lifts and keeping in accurate position of structural steel work including sand blasting wherever required to fine grade & applying one shop coat of epoxy primerof35 micron thickness including assembling & erection of fabricated steel work by bolting with M.S high tension & high steel friction grid bolts and site welding. Preparation of detailed fabrication & erection drawings of structural steel work from design drawings issued by Engineer-in-charge’s comments on same. AQpplying two coats of epoxy finishing paint of 30 micron thickness per coat on unencased structural parts and MS hollow sections only (epoxy paint shall not be paid separately). The shop coat of epoxy primer is not required in small areas of site-joints with HSFG bolts/ site-welds including MS inserts (e.g Foundation bolts with pipe-sleeves, lugged plate/angle surface inserts, through pipe inserts etc) as per drawings and direction of Engineer-in-charge, using M.S structural steel sections like ISMB, Angle, Channel, MS Plates etc. conforming to IS 808-1957, IS : 2062 of Grade 350 YST wide parallel flange beams as per IS:12778 approved for space frame i/c high strength nuts & bolts.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated coper conductor, single core cable in surface/recessed medium class PVC conduit as required

2x 2.5 sq.mm + 1x2.5 sq.mm earth wire

2x4.0 sq.mm+ 1x 4.0 sq.mm earth wire

2x6.0 sq.mm+ 1x 6.0 sq.mm earth wire

4x16.0 sq.mm+ 2x 6.0 sq.mm earth wire

(S/F PVC conduit ) Supplying & fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of Recessed conduit as required

20 mm

25 mm

50 mm

S/F modular boxes, base and cover platel:- Supplying and fixing following size/modules, 01 box along with modular base and cover plate forv modular switches in recess etc. as required

1 or 2 module (75mm x 75 mm)

3 module (75mm x 75 mm)

4 module (125mm x 75 mm)

6 module (300mm x 75 mm)

S/F power plug point modular type accessories: Supplying and fixing on existing GI Box modular plate and cover in front on surface or in recess, including providing and fixing 6 pin15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required

Supply, installation, testing and commissioning of Modular type Power outlet Unit for AC/ Geyser 572154 of Legrand or equiv in MK(Aspect)/ Schneider Zencilo including supply and fixing GI box for mounting of Power Unit.

S/F Modular type switch/socket: Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required

5/6 amp switch

2 way 5/6 amp 2 way switch

3 pin 5/6 amp socket outlet

Guangzhou LED PAR stage light 120x 3 W LED Guangzhou RBGW light has the following Specs- Voltage: AC90-245V/50-60 Hz, Power:360 watts, Colour of LED: RBGW can be mixed to more than 16.7 million kinds of colour, Lamp:54 PCS RBGW LED control: DMX 512, Master -slave, stand-alone, Music activate channel: 4/8 CH IP65 grade water proof used outdoors for architectural or decorative lighting, static colour and RGB colour mixing with or without DMX controller, can pull up numerous kinds of colour effect, Stroboscopic effects with adjustable speed, etc. Dimensions:- 275*225*32mm Weight:- 9.5 Kg

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, MCB, 10kA, Class 3 with integral label holder in the existing MCB DB complete with connections, testing and commissioning etc. as required.

25 Amps

40 Amps

63 Amps

SOUND SYSTEM:- Supply, installation, Testing and commissioning of Public Adress system consisting of the following components: Makes:- Morley IAS/Notifier/Gent/Seimens

Master Control Unit, PA & VA, Built-in 8 Loudspeaker line selecter, 500 W high efficiency class D power amplifier equivalent to HCU2000 of Honeywell

Remote Call Station, 8 preset buttons and 8 configurable buttons, optional gooseneck or PTT

High Efficiency Digital Power Amplifier, 500 Watt rate output power, 100V/70V output, equivalent to HAM2000 of Honeywell

Supply, installation, Testing and commissioning of exit point directional sound speaker with voice and integral audio amplifier with selectable sound pulse patterns complete as required

Zone expander with single audio channel mode , built-in 24 loudspeaker line selector, 24 dry contacts inputs HEX-24 of Honeywell

Supply, installation, Testing and commissioning of voice command keypad 6 zone, with microphone assembly complete as required

All in one Audio Source Unit (include pre-amplifier), CD/MP3/FM/DAB, with RS485Protocol Interface equivalent to X-MAP04 of Honeywell