Public Works Department Tender

Providing and laying 50mm thick dense graded bituminous macadam on prepared surface with 60-90 ( Sixty to Ninety) Tonne per hour (TPH) capacity computerized Hot Mix Plant production average output 75 tonne (Seventy five) TPH using crushed aggregate Grading–II of MORT&H specification premixed with VG-30 Bitumen as per approved JMF (The contractor shall submit the JMF from NABL lab and employer shall x-check it in the NABL lab) with minimum bitumen content 4.5% of total weight of mix, transporting the mixed materials with tipper and laying with hydrostatic paver finisher with sensor to the required grade and rolling with smooth wheels vibratory and tandom rollers to achieve desired density as per clause 505 of MORT&H specification (5th Revision) in all leads and lifts and including all corrective measures wherever required such as profile correction patching of pot holes sealing of cracks for all depths including all leads and lifts with all mode of transport and as per the direction of Engineer-in-charge. Nothing extra will be paid for increase in binder content as per JMF Qty of DGBM under NH Division Solan i.e.10737.33 cubic meter and under NH Division Theog i.e. 1672.00 cubic meter Total Qty = 12409.33 cubic meter

Providing and fixing cautionary sign boards of equivalent traingle of size 900x900x900 mm made of 2 mm thick alumium sheet with back support of M.S. angle 25x25x3 mm alongwith difinition plate of size 600x175 mm made of 2 mm thick aluminium sheet with back support of 25x25x3 mm M.S. angle front side to have retroreflective high intensity grade sheeting and back side painted with gray epoxy sign made as per IRC-767-2001 provided with 3.5 mtr long by post of M.S. angle 65x65x6 mm properly painted with high quality synthetic enamel paint in alternate colour black & white including excavation in earth work and providing and laying cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 20 mm nominal size ) including all leads, lifts and carriage of materials and as per the directions of Engineer-in-Charge and clause No. 800 of MORT&H specifications including all leads and lifts with all mode of transport and as per the direction of Engineer-in-charge Under NH Division Theog i.e. 26 Nos

Providing and applying Yellow colour Rumble strips by hot applied thermoplastic paint marking of 2.5 mm thick 300mm wide 15mm height(2.5*6 times) and 1000mm Centre to Centre spacing, one set is of 6 strips on various locations i.e. junction and sharp curves including all leads and lifts with all mode of transport and as per the direction of Engineer-in-charge Under NH Division Theog i.e. 405 M2