Public Works Department Tender

Earth work in excavation for structures in all depths as per drawing and technical specification for rural roads August 2004 clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal in all lead and lift including dressing of sides and bottom and back filling in trenches with excavated Suitable materials. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion damage to hill side water pollution etc. and to protect stability of hill side rock shall be excavated with chiseling and wedging out rock(where blasting is prohibited).all earth work in cutting/excavation including rock excavation shall be carried out true to lines grades, side slopes, width, camber super elevation and level as shown on the drawings or as directed by the Engineer-in-Charge .

Providing and laying concrete Mechanically mixed and vibrated P.C.C. M-10 nominal mix 1:3:6 (one cement : three sand: six graded stone aggregate 40mm forty millimeter) nominal size for plain /reinforced concrete in open foundations and plinths or similar works complete as per drawings and technical specification for rural roads August 2004 clause 802, 803, 1202 and 1203 and curing complete including the cost of form work and hauling of materials in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and laying filter media with granular crushed aggregate as per specification to a thickness of not less than 600 mm. (Six hundred millimeters) with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment wing wall return walls, to the full height compacted of firm condition complete as per drawing and technical specification rural roads August 2004 (Two thousand Four),clause 1204.3.8 (One thousand Two hundred Four point three point four) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge