Public Works Department Tender

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and M.O.R.D. technical specification clause 305 and 1603.4 and as per direction of the Engineer- In – Charge including setting out, shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty milimetres) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantam of water including cleaning of slush which may arrise out during dewatering as per direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidental.

Providing and laying mechanically mixed and virbrated plain cement concrete in open foundation for all type of road structure using of plain cement concrete grade M-10 (M Ten) nominal mix 1: 3: 6 ( One cement : Three sand : Six graded crushed stone aggregate 20mm (Twenty millimeter) nominal size in or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying under water complete for all heights/ depths including the cost of form work in drains as per drawings and M.O.R.D. technical specification section 800, 900 & 1200 as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms (two hundred fifty) per sqm area, thickness of 2.5 mm (two decimal five millimetre) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.