Public Works Department Tender

Excavation in earthwork in hilly area all heights and depths, in all kind of soil including saturated soil comprising of mixed soil, ordinary rock and hard rock. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution, etc. and to protect stability of hill side. Rock shall be excavated with chiseling and wedging out rock (where blasting is prohibited). All earth work in cutting/excavation, including rock excavation shall be carried out true to lines, grades, side slopes, width, camber, super-elevation and level as shown on the drawings or as directed by the Engineer-in-charge, in conformity with the requirement of technical specification clause 1603.1 & 1603.2 to achieve designed formation width including hauling and stacking of material useful for construction at suitable sites and safe disposal and dumping to be arranged by the contractor of unsuitable cut materials in specified manner , trimming, filling of unevenness, blindage and finishing of the road to specified dimensions or as directed by the Engineer-in charge for smooth riding. The recovery for useful stones, for 1601.22 cum (One Thousand Six Hundred One point Twenty Two) @ Rupees 300/= only (Rs. three hundred only) per cubic metre shall be effected on pro rata basis in all circumstances. Any loss to the public and private property during the course of excavation shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him in all cases.

Providing and laying of boulder apron laid in wire crates with 4mm (four millimetres) dia G.I. wire conforming to IS:280 and IS: 4826 in 100mm x 100mm mesh (woven diagonally) including 10% (Ten per cent) extra for laps and joints laid with stone boulders weighing not less than 40 Kg (Forty millimetres) each as per drawing and technical specifications Clause 1301 including hauling of material through all modes of transporations with in all leads and lifts and as per the entire satisfaction and direction of the Engineer-in-Charge. .