Public Works Department Tender

Providing and applying tack coat with Bitument emulsion (RS-I) using emulsion pressure distributor at the rate of 0.25 to 0.30 kg. (zero point twentyto zero point therty kilograms) per/ Square metre on the prepared bituminous surface cleaned with hydraulic broom as per M.O.R.D. technical specifications section No. 503and including hauling of material in all leads,lifts as per the entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidential. The rate including GST, octroi royality Malkhana toll tax sale tax or other taxes imposed by the Govenment

Providing laying and roling of open graded premix carpet of 20mm (twenty millimetre) compacted thickness composed of Type-A 13.2mm (Thirteen decimal two millimetre) to 5.6mm(five decimal six millimetre) aggregate at the rate of 0.27 cum( zero point two seven cubic metre) mixed with penetration grade bitumen at the rate of 14.6kg(fourteen point six kilogram) per ten square metre of road surface to the required line,grade and level to serve as wearing course on a previously prepared base including mixing and heating,binder and aggregate in Hot mix plant 30/40(thirty /forty tonne per hour capacity transporting mixed material with tipper and laying with pavery finisher to the required grade and camber and rolling with a three wheel 80-100(eighty hundred)KN static road roller,finished to required level and grades to be followed by a seal coat MORD technical specifications clause No. 502 including hauling of material in all leads ,lifts as per the entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads and lifts The rate including GST, octroi royality Malkhana toll tax sale tax or other taxes imposed by the Govenment

Providing and laying seal coat for sealing the voids in a bitumenous surface laid to specified level grade and cross fall using type-B as per technical specification clause 510 premixed at the rate of 6.8kg (sxi point eight kilogram) premixed with 0.06 (zero point zero six) cubic metre of fine aggregate per 10 sqm( ten square metre) heated in mini hot mix plant and laying manually of mixed material and rolling with power road roller 8-10(eight to ten) tonne capacity as per MORD technical specifications clause No. 503 including hauling of material in all leads,lifts as per the entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidential. The rate including GST, octroi royality Malkhana toll tax sale tax or other taxes imposed by the Govenment