Public Works Department Tender

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 in all respect and as per the direction of Engineer in Charge including all leads, Lifts and other incidentials the rate is including octrai, royality, toll tax or other taxes impossed by the Govt.

Providing, laying and rolling of close-graded Mix Seal Surfacing , surfacing material of 25 mm compacted thickness composed of type -A 11.2 mm ( Eleven decimal two milimetre) to 0.09 mm( zero point zero nine milimetre) nominal size crushed stone aggregate @ 0.338 cubic metre per square metre mixed with penitration grade bitumen VG-10 (Vilocity grade -10) @ binders contents @27.50kg/( twenty seven pint five zero kilogram) Per 10 sqm or 5.11% by weight and minimum density of MSS should be 2.10 gm/( two decoimal one zero) gram /cubic centimetre to required line, grade and level to serve as wearing course on a previously prepared base, Including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades exculding the cost of tack coat inclusive of all corrective measures such as laying of profile corrective coursefor all deapth and super elevation and camber, where required as per MORD Technical Specification section 500 complete in all respect and as per the direction of Engineer in Charge including all leads, Lifts and other incidentials the rate is including octrai, royality, toll tax or other taxes impossed by the Govt. inculding GST.