Military Engineer Services Tender

Excavating in post holes (or similar holes) in hard/ dense soil each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, complete all as specified and directed.

S&F of single side single "W" metal crash barrier comprising of cold formed W profiled section having thickness 3mm (uncoated thickness) with frame width of 311 mm depth 83 mm and length 4318 mm(made of IS marked HR coils conforming to IS 5986/2011) spaced 2.00 m C/C of the post which will be 800mm above the ground level and 1.0 m below the ground level including metal beam rail to be fixed on the vertical post with spacer channel of cold formed channel section size 150x75x5 mm and 1800mm long (made of IS marked HR coils conforming to IS 5986/2011), incl all necessary holes, all the above components shall - conform to clause 810 of MORTH & specifications including all fittings required for erection on road side W-beams , posts , spacers shall be hot dip galvanized with zinc coating of 550 gm/Sqm. All bolts , nuts and washers shall also be hot dip galvanized to IS:1367 pt-XIII/1983 (Reaffirmed 2011) for bolts and IS 14394/1996 (reaffirmed 2011) for nuts including carriage of material in all leads and lifts, all as shown in drawing and as per the direction of Engineer-in-charge.

M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete including necessary form work complete all as specified and directed.