Military Engineer Services Tender

S & F in repair metal tubular solar dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including excavation of post hole and embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

S&F in repair convex mirror 800 mm dia made up of polycarbonate reflective mirrors, outdoor use with hood and complete with mounting hardware for upto a height of 1500 mm, above GL and 45 cm below the GL with medium grade MS pipe 50 mm dia including two coats of anticorrosive paint over a coat of red oxide primer body made of ABS embedded in PCC (1:2:4) type B-1 of block size 30x30x45cm including PCC (1:3:6) type C-1 in foundation and necessary excavation in post hole complete all as specified and directed

Supply fabrication and erection of mandatory / warning sign board of shape equilateral triangle / Octagonal/Circular or rectangular confirming to IRC: 67 -2012 standard, fabricated with 3 mm thick aluminium composite panel in non metallic colour of approved shades consisting of 2 mm thick mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on exposed face and polymer (Service) coating on other face, with degreasing treatment & fine grinding on front side for proper pasting of Reflective sheet, Supply & pasting self adhesive retro reflective sheet with Micro prismatic Lens (diamond grade / OMNI grade Type VIII & IX), High intensity paste over ACB (one side) ..as base and with cut out massage / symbol (Right curve / left curve / Horn / speed limit / stop / look / go / No overtaking / round about/ drive slow etc including borders, letters, numerals etc IRC : 67 -2012 standard) with retro reflective sheeting (as mention hereinbefore of different colour), pasting as per manufacturers instruction complete all as specified and directed by Engineer-in-Charge.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil.

M&L for cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

Taking down / demolition of complete sign board of any description by cutting of post from ground level all as directed by the Engineer-in-Charge.