Military Engineer Services Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date21 Sep 2024
Closing Date19 Oct 2024
Tender Amount₹ 38,00,000
Costs
EMD
₹ 76,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_675803_1Bid Award Id
ViewTender No
GEP-39/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
S&F clip-in false ceiling system with plain steel beveled edged tile (600mmx600mm) manufactured out of 0.70mm aluminium sheet having power coating with 60 microns polyester paint on front side. Two sides of each tile shall be rised and piped and stopped to ensure positive engagement into the spring clip-in profile allowing for demounting of individual tiles. The rigid suspension system consists of rwos of galivanized steel 0.50mm thick clip-in profile of size 38mm x 20mm and installed at 600mm c/c spacing to support the tiles clip-in profiles shall be suspended and jointed from galvanized steel 'C' channels of size 10mm x 38mm x 10mm with hold on clamps at spacing as specified by manufacturer. Suspension angles shall be suspended from the roof structure by GI ceiling brackets as per manufacturer's instructions and jointed to the 'C' channels. The tiles shall be held in place by pressure clips 'C' at spacing as per manufacturer's instructions. GI wall angle shall be used on wall angle shall be used on wall of size 20mm x 30mm x 20mm and 0.5mm thick with matching the colour with tiles all as manufacturer's specification/instructions and including necessary scaffolding all as specified and directed.
225
-
-
Dismantling of old rested plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof covering etc. complete all as specified and as directed.
90
-
-
S&F 0.63mm Galvanised,corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type or cranked hook bolts and washers in roofs,walls etc. with grade of zinc coating 275 complete all as specified and directed.
75
-
-
S&F 0.80 mm in thickness plain, galvanised, mild steel sheeting, in ridges, hips valley gutters,drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
15
-
-
Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed.
6
-
-
Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) exc 1.5 sq.m but n. exc 4 sq.m each, complete all as specified and directed.
12
-
-
S&F 35mm thick factory made 2nd class hard wood rail and style plain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed.
10
-
-
S&F 35mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.
3.6
-
-
S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed.
21
-
-
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed.
6
-
-
S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer, complete all as specified and directed.
10
-
-
S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer,complete all as specified and directed.
20
-
-
S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
24
-
-
S&F 100 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
16
-
-
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
24
-
-
S&F in repairs 150mm long floor door stopper of aluminium alloy body and tongue,anodised, with hard drawn steel spring complete all as specified and directed.
6
-
-
S&F 300 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
8
-
-
Prepartion of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.
25
-
-
Prepartion of old wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed.
30
-
-
M&L preparing new surface of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.
25
-
-
M&L preparation of old surfaces of steel of any description, over 10 cm width or girth not other wise described and appliying two coats of synthetic enamel paint over existing surface complete all as specified and directed.
30
-
-
S&F anodised aluminium frame for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
30
-
-
S&F 5.5 mm thick sheet glass ordinary quality pin headed/plain to aluminium frame of partition etc. fixed with rubber gasket & aluminium powder coated snap beading etc. complete all as specified and directed.
4
-
-
S&F in repair aluminium anodized powder coated door shutters, aluminium section weighing 0.55 Kg/mm including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed.
2.3
-
-
S&F in repair aluminium anodized powder coated window and ventilator shutters, fixed type/sliding type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodixed aluminium snap beading, screws etc complete all as specified and directed.
5
-
-
S&F in repairs brass 4 Levers mortice lock, vertical type of size 100mm, complete all as specified and directed.
1
-
-
Dismantling timber scantlings 40Sq.cm and over in section, in any position complete all as specified and directed.
1.5
-
-
M & L second class soft-wood (Kail) clean sawn as in vertical post,scantling for ceiling or roof truss member etc complete all as specified & directed.
1.5
-
-
Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.
2
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
70
-
-
M&L 50mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection/footpath finished even and smooth without using extra cement complete all as specified and directed.
40
-
-
M&L 25mm thick PCC 1:2:4 yype B-0 (using 12.50mm thick crushed stone aggregate) as in floors finished rough to receive floor finishes complete all as specified and directed.
50
-
-
M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.
15
-
-
M&L Vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified.
30
-
-
M&L Vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10 mm thick backing coat in CM 1:3 complete all as specified.
5
-
-
M&L joint free coloured glazed ceramic tiles in vertical surfaces 300x200x7mm as in skirting/dado etc, over and including 10mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.
20
-
-
Taking down cement plaster including tiles of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
160
-
-
Rendering 15mm thick plaster on fair faces of brick work/stone masonry, concrete surface in CM 1:6, finished the surface even and smooth without using extra cement complete all as specified and directed.
100
-
-
Rendering 15mm thick plaster on fair faces of brick work/stone masonry, concrete surface in CM 1:4, finished the surface even and smooth without using extra cement complete all as specified and directed.
60
-
-
S&F vitreous china half staff urinal flat back, size 465x355x265mm white (minimum), including grating and union for discharge pipe excluding flushing cistern, flush pipe and waste pipe, complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing, flush pipe grating and ujnion for discharge pipe, incl urinal spreader complete all as specified and directed.
2
-
-
S&F in repairs vitreous chinaware squatting pan, 'Orissa pattern' size 580mm x 440mm white, with cast iron 'P' or 'S' trap, front or back inlet, integral foot rest with provision of PCC M-15, type B-1 using 20mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, anti-syphonage pipe etc and making good to floors to match existing, in repair, complete all as specified and directed.
4
-
-
M&L 10 litres capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32mm dia PVC flushing pipe and 15mm dia, 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends (fixed in repair), complete all as specified and directed.
4
-
-
S&F Vitreous china, wash hand basin, (white) of size 550mm x 400mm including brass CP waste coupling 32mm size with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends (fixed in repair), complete all as specified and directed.
4
-
-
S&F in repairs, fancy type, pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.
4
-
-
S&F in repairs, fancy type, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.
4
-
-
S&F in repairs stop valve/angle valve, fancy type, cast copper alloy, screwed down, high pressure, with quarter turn flange, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed.
4
-
-
S&F PVC connection 15mm size, 600 mm long with PTMT nuts complete all as specified and directed.
8
-
-
S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and directed.
4
-
-
Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specifed and directed.
20
-
-
Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from site complete all as specified and directed.
15
-
-
S&F steel water tubing, 15 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, complete all as specified and directed.
20
-
-
S&F steel water tubing, 20 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, complete all as specified and directed.
15
-
-
M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
1
-
-
Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.
4
-
-
M&L steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and directed.
400
-
-
Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving's not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.
0.5
-
-
Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.
3
-
-
M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed.
3
-
-
M&L plain cement concrete 1:3:6 type C-2 (using 20mm graded crushed stone aggregates) as in surface channels or drains etc, complete all as specified and directed.
5
-
-
M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.
4
-
-
M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.(inner girth only measured)
50
-
-
Preparation of new plastered surfaces of walls and applying two or more coats distempering with first quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre,of approved manufacturer,of required shade and colour complete as per manufacturer's specification over and including 2mm thick plaster of paris putty to prepare the surface even and smooth complete all as specified and directed.
100
-
-
Preparation of old plastered surfaces of walls by complete removal of existing treatment and applying two or more coats distempering with first quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre,of approved manufacturer,of required shade and colour complete as per manufacturer's specification over and including 2mm thick plaster of paris putty to prepare the surface even and smooth complete all as specified and directed.
250
-
-
Preparation of old plastered surfaces of walls by complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paints having VOC content less than 50 gms/litre, and UV resistance as per IS 15489-2004,alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additived @1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90litre/10 sqm on new surface complete all as specified and directed.
90
-
-
Dismantling cast iron or reinforced concrete drain pipe 100/110mm bore, jointed in cement mortar and taking out of trenches, taking out from walls incl clamps, if required complete all as specified and directed.
10
-
-
Dismantling cast iron or reinforced concrete drain pipe 75mm bore, jointed in cement mortar and taking out of trenches, taking out from walls incl clamps, if required complete all as specified and directed.
10
-
-
S&F in repairs 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed to walls/ laid in trenches or in floors, complete all as specified and directed.
10
-
-
S&F in repairs 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed to walls/ laid in trenches or in floors, complete all as specified and directed.
10
-
-
M&L 75 mm size cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete including taking down old unserviceable floor trap complete all as specified & directed.
4
-
-
S&F in repairs 110mm bore PVC (SWR) bends of any radius complete all as specified and directed.
6
-
-
S&F in repairs 75mm bore PVC (SWR) bends of any radius complete all as specified and directed.
4
-
-
S&F 110mm bore PVC (SWR) branch pieces, (single Y) equal or unequal complete all as specified and directed.
4
-
-
S&F 110mm bore PVC (SWR) junction, (single T) equal or unequal complete all as specified and directed.
4
-
-
S&F 110mm bore PVC (SWR) junction, (double T) equal or unequal complete all as specified and directed.
4
-
-
SCHEDULE 'A' PART-II
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc or for laying of underground cables, errection of poles, struts / stays etc including taking out cable cover or stone slab, not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and directed.
189
-
-
All as per item No. 78 here in above but in hard/PCC/floor/road.
4
-
-
Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and directed.
129
-
-
Removing excavated any type of soil to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
59.65
-
-
M&L sand cushioning to undergound cable with using a layer of sand 8cm before laying the cable and 15cm after laying the cable (10cm punned thickness above the top of the upper most cable, total 18cm), complete all as specified and directed.
52.65
-
-
M&L providing PCC cable cover class LV type-I of size 250x150x140mm laid in perpendicular to the cable abutting each other complete all as specified and directed.
4333
-
-
Taking out from trenches/floors/road/ wall/pipe/pole LT cable of any size/description and removing from site incl making good the disturbed surfaces to match with existing surface complete all as specified and directed.
1050
-
-
Supply and laying or fixing or passing through pipe or laid in trenches, 1100 Volt grade heavy duty cable XLPE insulated, armoured electric cable with aluminium conductor ,cross-sectional area 95 sq.mm 3 1/2 core including taking out old unserviceable cable complete all as directed by Engineer-in-charge.
220
-
-
Supply and laying or fixing or passing through pipe or laid in trenches, 1100 Volt grade heavy duty cable XLPE insulated, armoured electric cable with aluminium conductor ,cross-sectional area 70 sq.mm 3 1/2 core including taking out old unserviceable cable complete all as directed by Engineer-in-charge.
150
-
-
Supply and laying or fixing or passing through pipe or laid in trenches, 1100 Volt grade heavy duty cable XLPE insulated, armoured electric cable with aluminium conductor ,cross-sectional area 50 sq.mm 3 1/2 core including taking out old unserviceable cable complete all as directed by Engineer-in-charge.
150
-
-
Supply and laying or fixing or passing through pipe or laid in trenches, 1100 Volt grade heavy duty cable XLPE insulated, armoured electric cable with aluminium conductor ,cross-sectional area 16 sq.mm 4 core including taking out old unserviceable cable complete all as directed by Engineer-in-charge.
300
-
-
Supply and laying or fixing or passing through pipe or laid in trenches, 1100 Volt grade heavy duty cable XLPE insulated, armoured electric cable with aluminium conductor ,cross-sectional area 10 sq.mm 2 core including taking out old unserviceable cable complete all as directed by Engineer-in-charge.
200
-
-
S&F 50mm bore galvanised iron water tubing, medium grade fro cable protection laying in trenches/floor under road complete all as specified and directed.
12
-
-
S&F 80mm bore galvanised iron water tubing, medium grade fro cable protection laying in trenches/floor under road complete all as specified and directed.
12
-
-
S&F 100mm bore galvanised iron water tubing, medium grade fro cable protection laying in trenches/floor under road complete all as specified and directed.
6
-
-
M&L air termination vertical type, single pointed made with 12mm dia 300mm long aluminium rod including necessary fixing arrangements with aluminium bolts, nuts, lead washers etc. complete and incl provision of GI tubing light grade 40mm dia, 300mm long embedded in PCC block (size 30cm x 30cm x 30cm) one end and other end fitted with air termination rod complete all as specified and directed.
18
-
-
S&F horizontal/down conductors, aluminium strip of size 25 x 3.15mm and incl epoxy insulator bus bar type 40mm thick at an interval of 60cm apart for lightening protection on roof and for down conductors, including all fixing arragements and aluminium nut, bolt & washers complete all as per IS-2309-1989 and testing all as specified and directed.
Note:- Aluminium strip shall be jointed with rivets (minimum 4 Nos)
120
-
-
S&F test point terminal block made out of gun metal or phophorus bronze of size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hex head screw for fixing the same on wall complete all as specified and directed.
4
-
-
S&F galvanised strip of size 32 x 6mm from earth pit to test point provided all around the bldg for lightening protection laid in trenches/fixed to walls on epoxy insulators with screws etc and connecting up complete all as specified and directed.
80
-
-
M&L painting to steel tubular pole and fittings by scrapping old paint and applying two coats of synthetic enamel paint over a coat of red oxide pirmer to match the existing colour including removing of black/yellow straps of existing steel tubular pole including painting of black/yellow straps each of 30cm height upto 1.5 mtr from bottom of pole and writing pole number with white paint on black base of pole complete all as specified and directed.
30
-
-
Supply, installation, commissioning and testing LT feeder pillar box outdoor type factory fabricated made out of MS sheet of thickness 3.15mm with front door openable with locking arrangement mounted on angle iron legs made out of angle iron size 40mm x 40mm x 6mm, 1.0 mtr long, 0.50mtr above ground level and 0.50 mtr embedded in PCC blocks of size 0.30 mtr x 0.30 mtr x 0.50 mtr - 4 Nos, duly painted with two coats of synthetic enamel paint over a coat of red oxide, complete with 125 amps rated copper bus bar LED phase indicators, suitable for 3 phase 4 wire supply system with following:-
(i) MCCB 63 Amp 4 pole breaking capacity 25 KA- 02 Nos, Timer, contactor MNX70, indication lamp, rotary switch complete all as specified and directed.
1
-
-
Supply, installation, commissioning and testing LT feeder pillar box outdoor type factory fabricated made out of MS sheet of thickness 3.15mm with front door openable with locking arrangement mounted on angle iron legs made out of angle iron size 40mm x 40mm x 6mm, 1.0 mtr long, 0.50mtr above ground level and 0.50 mtr embedded in PCC blocks of size 0.30 mtr x 0.30 mtr x 0.50 mtr - 4 Nos, duly painted with two coats of synthetic enamel paint over a coat of red oxide, complete with 400 amps rated copper bus bar LED phase indicators, suitable for 3 phase 4 wire supply system with following:-
(i) MCCB 250 Amp 4 pole breaking capacity 36 KA- 01 No
(ii) MCCB 63A TPN-04 Nos (outgoing)
(iii) MCBC SPN 40 amp-2 Nos, rotary switch, voltmeter, ammeter complete all as specified and directed.
1
-
-
Excavation post holes (or similar holes) in any type of soil each n exc 0.50 cu.m,getting out,returning,filling on and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25cm, complete all as specified and directed.
24
-
-
M&L mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or reveting etc. and similar work conforming to Fe-290 Gde E-165 including two coats of paint as directed over a coating of red oxide primer complete all as specified and directed.
400
-
-
Supply only chain link fencing 3.6mm dia of GI wire and minimum 1mm thick vinyl coating, 50mm x 50mm mesh size complete all as specified and directed.
Note:- (i) The dia meter of the mesh after PVC coating shall be 5.6mm
(ii) The PVC coating shall be green in colour
(iii) The GI chain link mesh with PVC coating shall be weighed for the purpose of payment.
400
-
-
Fixing only GI wire chain link fencing including line wires, any mesh, size and type to any type of standards, rails, strain in bolts etc including provision of binding wire complete all as specified and directed.
240
-
-
Supply and spread graded coarse aggregate 40 mm to 63mm nominal size around outdoor transformer and two/four pole structure/panel complete all as specified and directed.
30
-
-
Taking down old unserviceable copper/ aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
264
-
-
Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed.
9
-
-
Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed.
465
-
-
M&L point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm PVC (FRLS-H) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLSH) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including polycarbonate/modular GI sheet metal flush boxes of anyway (as per site requirement) and modular white cover plate with frame for mounting switches, sockets, regulators etc for fixing one light/fan/bell point controlled by one switch and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed.
Notes : (a) Wiring shall be done by using proper colour coding.
(b) Earth wire shall be of green colour.
(c) On RCC roof/celing PVC casing 'N' capping shall be provided on surface with proper fixing clamps all as directed by Engr-in-Charge.
148
-
-
All as per the description of serial item No 108 here-in-before but one 5/6 pin socket outlet, 5 amps on the same board complete all as specified and directed.
25
-
-
All as per the description of serial item No 108 here-in-before but one 5/6 pin socket outlet, 5 amps, independent complete all as specified and directed.
50
-
-
All as per the description of serial item No 108 here-in-before but for one 5/6 pin socket outlet 15 Amps on Independent board with cables 2.5 sqmm size complete all as specified and directed.
Note:- Power circuit shall be done in separate circuit.
41
-
-
S&F in replacement ceiling rose, 3 terminal surface type complete all as specified and directed.
50
-
-
S&F in replacement angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
10
-
-
S&F in replacement modular switch 1 way 6 A,1 module, 240 volts ISI marked complete all as specified and directed.
30
-
-
S&F in replacement modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed.
25
-
-
S&F in replacement socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.
30
-
-
S&F in replacement socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.
25
-
-
S&F LED complete fitting including batten LED polycarbonate 1 x 20 watt tuberod, appx 4 feet long, environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and specifications complete all as specified and directed.
20
-
-
S&F in replacement sheet metal enclosures, TPN Distribution board 4 way, 415V double door complete with appropriate size bus bar, neutral link and earth bar fixed flush in wall including chases wall for fixing DB and making good disturbed wall surfaces to match with existing specification complete all as specified and directed.
Note: Distribution board and MCB's should be same make.
2
-
-
S&F distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and directed.
Note: Distribution board and MCB's should be same make.
2
-
-
S&F in replacement 240V, 10 KA, 'C' curve MCB SP and current carrying capacity 6 to 32 amps, in the MCB DB complete with connection testing and commisioning complete all as specified and directed.
24
-
-
S&F 40 Amp rating 240V, 10 KA, 'C' curve MCB and current carrying capacity in the MCB DB complete with connection testing and commisioning complete all as specified and directed.
2
-
-
S&F 63 Amp rating 240V, 10 KA, 'C' curve MCB and current carrying capacity in the MCB DB complete with connection testing and commisioning complete all as specified and directed.
2
-
-
S&F MCB TPN ‘C’ curve, 10KA, 415V, 63 amps in the MCB DB including necessary connection complete all as specified and directed.
2
-
-
S&F MCB TPN ‘C’ curve, 10KA, 415V, 100 amps in the MCB DB including necessary connection complete all as specified and directed.
1
-
-
M&L sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 6.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed.
Note:-1. Wiring shall be done in proper colour coding.
2. Cutting chases on the wall wherever required is deemed to be included in unit rate quoted.
200
-
-
M&L sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 10 Sq mm for phase and neutral and one run of 10.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed.
Note:- Wiring shall be done in proper colour coding.
200
-
-
S&F LED round bollard light type 7 watt 230 volt AC outdoor type for 360 degree indirect light IP65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
12
-
-
S&F LED spike light type 9 watt 230 volts AC outdoor type for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete all as specified and directed.
6
-
-
S&F decorative post top lantern LED light 25 watt 230 volts AC outdoor type for 360 degree indirect light IP65 protection with impact and corrosion resistant glare free complete with driver and lamp complete all as specified and directed.
6
-
-
S&F recess mounted slim LED luminaire with drop down diffuser light of size 2ft x 2 ft, 36W 230 volts AC corrosion resistant complete all as specified and directed.
20
-
-
S&F in replacement MCCB 250 amp, 4 pole, 415V, 50 Hz breaking capacity 36KA, adjustable & fixed magnetic setting type complete all as specified and directed.
1
-
-
S&F in replacement MCCB 160 amp, 4 pole, 415V, 50 Hz breaking capacity 25KA, adjustable & fixed magnetic setting type complete all as specified and directed.
1
-
-
S&F in replacement MCCB 125 amp, 4 pole, 415V, 50 Hz breaking capacity 16KA, adjustable & fixed magnetic setting type complete all as specified and directed.
1
-
-
S&F in replacement MCCB 100 amp, 4 pole, 415V, breaking capacity 16KA complete all as specified and directed.
1
-
-
S&F in replacement MCCB 63 amp, 4 pole, 415V, breaking capacity 16KA complete all as specified and directed.
2
-
-
Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI earthing strip 32x6mm by means of GI bolts/nuts/washers and protected by 40 mm bore GI light grade pipe upto test point or upto main switch board / electric equipment / pole / lightning arrestor / HT/LT equipments / GODO switch etc, fixing with 02 Nos nuts and bolts and protection pipe fixed with and including flat iron clamps, bolts, nuts and washers. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete all as specified and as directed by Engineer-in-charge.
13
-
-
Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing strip upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.
-
-
-
S&F glow sign board of fabricated acrylic cover sign board made out of acrylic sheet 2mm fitted on front side of the box made out of GI sheet 24 SWG for making installation name board duly written in letters such as Stn Name or Bldg Name etc by BLUE COLOUR letters as directed and sepcified by the deptt including 1x40 watts tube light 5 fitting fitted inside the board with connecting wire from board to switch, size of sheet board 12'x12'x1' and name should be written in BOLD CAPITAL letters complete all as specified and directed.
1
-
-
Supply, installation, testing and commissioning of CPRI approved factory made LT feeder pillar box outdoor type with double doors provided with locking arrangements dust, vermin and water proof made out of 3.15mm thick CRCA sheet duly compartmentalized inside panel with 2mm thick CRCA sheet powder coated with back door detachable fixed with nuts, bolts and washers and front doors openable type fitted with hinges and knobs/locks. Panels is to be placed on angle (size 50x50x6mm) frame duly painted with two coats of synthetic enamel paint over a coat of primer to the portion visible to eye supported on 04 legs 750mm long each duly 450mm grouted in PCC blocks of type 1:2:4 type B-1 and 300mm above ground level for entry of cables suitable for 3 phase, 4 wire, 50Hz, 415 volts with and including necessary incoming and outgoing cable connection with proper size aluminium lugs, nut bolts etc. including the following complete all as specified and directed:-
1
-
-
(a) MCCB, 400 amp, 4 pole, 36 KA (I/C for main supply)- 01 Nos
(b) MCCB, 250A, 25KA, 4 pole (OG)- 04 Nos
(c) MCCB 100A, 25KA, 3 pole - 02 Nos
(d) MCB, SPN 32A, 25 KA- 01 No
(e) LED type AC 220V phase indicator RYB
(f) Aluminium strip bus bars with heat shrinkable type colour code PVC insulation sleeves 400 amps capacity TPN mounted on epoxy insulators- 02 set voltmeter, amp meter, indicator lamps, CT coil 100/5- 01 Set
(g) Aluminium bus bar 4 strip- 400 amps capacity.
(h) Internal wiring of panel board with copper cable single core of suitable size and incl 03 Nos bakelite control fuses.
(j) Danger notice plate for LT with conventional skull and bones duly rivetted/pasted to the panel board door.
Note: The contractor will approve the panel drawing before incorporate in teh work and should be CPRI approved.
-
-
-
Supply, installation, testing and commissioning of CPRI approved factory made LT feeder pillar box outdoor type with double doors provided with locking arrangements dust, vermin and water proof made out of 3.15mm thick CRCA sheet duly compartmentalized inside panel with 2mm thick CRCA sheet powder coated with back door detachable fixed with nuts, bolts and washers and front doors openable type fitted with hinges and knobs/locks. Panels is to be placed on angle (size 50x50x6mm) frame duly painted with two coats of synthetic enamel paint over a coat of primer to the portion visible to eye supported on 04 legs 750mm long each duly 450mm grouted in PCC blocks of type 1:2:4 type B-1 and 300mm above ground level for entry of cables suitable for 3 phase, 4 wire, 50Hz, 415 volts with and including necessary incoming and outgoing cable connection with proper size aluminium lugs, nut bolts etc. including the following complete all as specified and directed:-
1
-
-
(a) MCCB, 250 amp, 4 pole, 36 KA (I/C for main supply)- 01 Nos
(b) MCCB, 100A, 25KA, 3 pole (OG)- 03 Nos
(c) MCB, DB 32A, 25 KA-01 No
(d) LED type AC 220V phase indicator RYB
(f) Aluminium strip bus bars with heat shrinkable type colour code PVC insulation sleeves 400 amps capacity TPN mounted on epoxy insulators- 02 set voltmeter, amp meter, indicator lamps, CT coil 100/5- 01 Set
(g) Aluminium bus bar 4 strip- 400 amps capacity.
(h) Internal wiring of panel board with copper cable single core of suitable size and incl 03 Nos bakelite control fuses.
(j) Danger notice plate for LT with conventional skull and bones duly rivetted/pasted to the panel board door.
Note: The contractor will approve the panel drawing before incorporate in teh work and should be CPRI approved.
-
-
-
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sqmm 2 core nominal mix section in service connections complete all as specified and directed.
100
-
-
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 Sqmm 4 core nominal mix section in service connections complete all as specified and directed.
100
-
-
S&F off-load type changeover switch 63 Amp, 4 pole, 415 volt, with enclosure type complete all as specified and directed.
1
-
-
S&F off-load type changeover switch 100 Amp, 4 pole, 415 volt, with enclosure type complete all as specified and directed.
1
-
-
S&F cable junction box made of thermoplastic, halogen free, weather proof with metric knock outs for cable entry including four/five pole terminals and cable entry glands for incomming, outgoing and connection cable with protection grade IP-66/67 of size 205x255x112mm and suitable for LT under ground cable any size/capacity including bracing clamp, bolts, nuts & washers complete all as specified and directed.
24
-
-
M&L HDPE double wall corrugated pipe of size 50mm outer dia and 38mm inner dia conforming to IS: 14930 Part-II including necessary pipe fittings such as couplers, ends caps, bend etc. including fixed to wall/roof/pole/trench as required with suitable clamps for cable protection complete all as specified and directed.
100
-
-
M&L HDPE double wall corrugated pipe of size 63mm outer dia and 50mm inner dia conforming to IS: 14930 Part-II including necessary pipe fittings such as couplers, ends caps, bend etc. including fixed to wall/roof/pole/trench as required with suitable clamps for cable protection complete all as specified and directed.
100
-
-
M&L HDPE double wall corrugated pipe of size 90mm outer dia and 75mm inner dia conforming to IS: 14930 Part-II including necessary pipe fittings such as couplers, ends caps, bend etc. including fixed to wall/roof/pole/trench as required with suitable clamps for cable protection complete all as specified and directed.
50
-
-
Supply, fixing & testing 50W LED flood light fitting IP66 powder coated pressure die cast aluminium high power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewired and suitable arrangement for mounting on existing MS frame bracket including connecting the fitting and taking down complete all as specified and directed.
4
-
-
Supply, fixing & testing 70W LED flood light fitting IP66 powder coated pressure die cast aluminium high power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewired and suitable arrangement for mounting on existing MS frame bracket including connecting the fitting and taking down complete all as specified and directed.
4
-
-
M&L removal green vegetation and dressing around the plinth/PCC hardstanding upto 1.5 mtr of sub station panels and transformer etc. including disposal of vegetation/material upto 50 mtr distance from the site and levelling/surfacing the ground complete all as specified and directed.
400
-
-
S&F Sheet metal enclouser double door for distribution board factory made for MCB DB load link VPTN 4 way suitable for MCCB as incommer 100 amp 4 pole and including MCCB 100 amps 4 pole 16 KA (where MCB are to used) complete with suitable size of bus bar complete fixed flush in wall including chases wall for fixing DB and making good the disturbed wall surfaces to mach the existing specification including taking down old DB complete all as specified and directed.
2
-
-
M&L cable route indicator showing "LT cable" and rout of cable with arrow made of CI in suitable eliptical/round shape and fixed on angle iron 40x40x6mm, 800mm long painted in blue colour with two coats of synthetic enamel paint over a coat of red oxide primer duly embedded in PCC block (0.40x0.40x0.40) mtr including in ground and 0.15 mtr above the ground level complete all as specified and directed.
15
-
-
S&F in replacement 20 watt acrus LED flood light (Red, Green, Worm white colour) fitting with high efficiency and glare free luminaire available with integrated IP 67 and with 30 to 45 degree beam angle made up of pressure die-cast aluminium alloy housing with toughened glass, IP 67 protection and impact resistance of IK07 and individual high power LEDs, inbuilt potted electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open circuit protection, over voltage protection, surge cradle of thickness 5mm provided with the fixture including taking down existing unsv flood light fitting of any description complete all as specified and directed.
2
-
-
Supply, fixing and testing 60W LED street light fitting IP66 powder coated pressure die cast aluminium high power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewired and suitable fixing arrangement for mounting on existing MS frame bracket including connecting the fitting and taking down complete all as specified and directed.
10
-
-
S&F switch piano, flush button single pole one way 5/6 Amp complete ass as specified and directed
133
-
-
S&F socket outlet, multipurpose, 2 in 1 3 pin, 5/6 Amp complete all as specified and directed
45
-
-
S&F socket outlets 6/16 Amps, 3 pin flush type, complete all as specified and directed.
16
-
-
S&F switch piano 16 Amp flush type single pole one way with ISI marked,complete all as specified and directed.
16
-
-
S&F ding dong bell musical type AC 230 volt single pole complete all as specified and directed.
5
-
-
S&F ceiling rose, 3 terminal surface type complete all as specified and directed.
73
-
-
S&F angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
10
-
-
Supply and fix stepped type electronic fan regulator flush type on the existing phenolic laminated sheet suitable for 240 volts AC 100 watt etc. complete all as specified and directed.
28
-
-
S&F surface/wall mounted light fitting prewire suitable for single T8 LED tube alongwith supply and fixing one number LED tube in polycarbonate housing of nominal wattage- 18 watt, Lumen output-2100 Lm, colour temp-6500 Kelvin, size & length- G13/T8/4 feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed.
45
-
-
S&F Sheet metal enclousers, TPN distribution board 4 way, double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
Note:- Distribution board and MCB's should be same make.
1
-
-
M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and directed.
Note:- Distribution board and MCB's should be same make.
2
-
-
M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed.
Note:- Distribution board and MCB's should be same make.
2
-
-
S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
30
-
-
S&F SPN 40 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
4
-
-
S&F 415V 10KA 'B' curve TPN 63 Amp miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.
1
-
-
M&L in replacement sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 6.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed.
Note:-1. Wiring shall be done in proper colour coding.
2. Cutting chases on the wall wherever required is deemed to be included in unit rate quoted.
65
-
-
M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connecting to GI earth wire of size 4mm size by means of bolts, nuts, check nuts and protected by provision of GI medium grade pipe of 15mm bore including provision of 40mm tk cover of RCC (1:2:4) reinforced with XPM (wt no less than 4Kg/sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handle made to shape, GI light grade 20mm dia pipe for watering of suitable length placed on tp edge of earth plate, common salt and charcoal filling, with fixing arrangement, funnel, wire mesh and excavation and earthwork in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50m complete all as per plate No. 3 of SSR 2009 Part-I and connecting to earth test point all as specified and directed by Engineer-in-Charge and including testing on completion.
1
-
-
Note:-(i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B1, 80mm thick reinforcement with 8mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item.
(ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe up to 7.50m and the rate includes in the unit rate of item.
(iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includese in the unit rate of item.
(iv) The earth chamber shall be constructed 5m away from the edge of the bldg pit and the cost of the same is deemed to be included in the rate for this item.
-
-
-
Disconnecting/taking down ceiling fan of size 1200mm/1400mm sweep removing and cleaning the dust properly, painting with same colour good quality synthetic enamelled paint after preparing surface for painting oiling and greasing of bearing including refixing and making the connection and testing complete all as specified.
28
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements