Military Engineer Services Tender

Removing of surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point complete all as specified and directed.

Dismantling and taking out old u/s worn out MS/CI/GI pipe line flanged type 150 mm bore including fittings complete with nuts, bolts, washers and gaskets etc and removing from the site complete all as specified and as directed by Engineer-in-charge. Note:- New pipes shall be laid first at spring area and old ones to be taken out later.

Supplying, laying, jointing and testing hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 164.22 mm, with nominal wall thickness 7.11 mm and weight 28.26 Kg/ mtr, including short pieces as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge. NOTE:- (i) Excavation Earth work, PCC, seamless pipe fittings, MS flanges & flanged joints shall measured and paid for separatly under relevant items. (ii) Work will be carried out in piecemeal loacations experienced based on break downs and weaker sections of existing rising main as per site requirement and as directed by Engineer-in-charge. (iii) Any other expenses including permision from state authorities are included under this item.

Material & labour for MS Flange of inner dia 150 mm and 305 mm outer dia of thickness 28.57 mm having 8 holes drilled for and for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified. and directed.

Supply and Fixing joint for 150mm nominal size pipes comprising of one 3.0 mm steel reinforced compressed asbestos fibre gasket and incl 8 Nos 19.05mm dia ,100mm long Nut ,bolts, 2 nos washer incl 3 mm thick gasket of required size and shape complete nut bolt of size m30 and 125mm length and 02 nos washer 3 mm thick for each joint pipe /fittings/bends etc complete all as specified and directed and Engr-in-charge.

Dismantling and taking out old u/s worn out MS/CI/GI pipe line flanged type 100 mm bore including fittings complete with nuts, bolts, washers and gaskets etc and removing from the site complete all as specified and as directed by Engineer-in-charge. Note:- New pipes shall be laid first at spring area and old ones to be taken out later.

Supplying, laying, jointing and testing hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-100 mm, outer dia 112.04 mm, with nominal wall thickness 6.02 mm and weight 16.08 Kg/ mtr, including short pieces as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge. NOTE:- (i) Excavation Earth work, PCC, seamless pipe fittings, MS flanges & flanged joints shall measured and paid for separatly under relevant items. (ii) Work will be carried out in piecemeal loacations experienced based on break downs and weaker sections of existing rising main as per site requirement and as directed by Engineer-in-charge. (iii) Any other expenses including permision from state authorities are included under this item.

Material & labour for MS Flange of inner dia 100 mm and 305 mm outer dia of thickness 28.57 mm having 8 holes drilled for and for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified. and directed.

Supply and Fixing joint for 100mm nominal size pipes comprising of one 3.0 mm steel reinforced compressed asbestos fibre gasket and incl 8 Nos 19.05mm dia ,100mm long Nut ,bolts, 2 nos washer incl 3 mm thick gasket of required size and shape complete nut bolt of size M30 and 125mm length and 02 nos washer 3 mm thick for each joint pipe /fittings/bends etc complete all as specified and directed and Engr-in-charge.

Supply And Fixing in replacement of Air release valve DI Single Chamber, Tripple Action with Ss floating And working parts & Fb Expoxy coating in PN1.6 of size 150mm confoming to IS 14845 incl 8 Nos holes,19.05mm dia ,100mm long Nut ,bolts, 2 nos washer incl 3 mm thick gasket of required size and shape complete for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified. and directed.

Supplying, laying, jointing and in replacement testing of Tees, suitable length and as per site requirement, made of hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 164.22 mm, with nominal wall thickness 7.1 mm and weight 28.2 Kg/ Rm, including short pieces with flanged ends duly fabricated as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge.

Supplying, laying, jointing and in replacement testing of Tees, suitable length and as per site requirement, made of hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-100 mm, outer dia 112.4 mm, with nominal wall thickness 7.1 mm and weight 28.2 Kg/ Rm, including short pieces with flanged ends duly fabricated as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge.

Supplying, laying, jointing in replacement of Seamless bend OF 150MM , suitable length and as per site requirement, made of hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 164.22 mm, with nominal wall thickness 7.1 mm and weight 28.2 Kg/ Rm, including short pieces with flanged ends duly fabricated as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge.

Supplying, laying, jointing in replacement of Seamless bend of 100mm suitable length and as per site requirement, made of hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-100 mm, outer dia 112.4 mm, with nominal wall thickness 7.1 mm and weight 28.2 Kg/ Rm, including short pieces with flanged ends duly fabricated as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge.

Supply And Fixing in replacement of DI Gear Operated Valve PN1.6 Epoxy coated with ssp & HW size 150mmincl 8 Nos 19.05mm dia ,100mm long Nut ,bolts, 2 nos washer incl 3 mm thick gasket of required size and shape complete for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified. and directed.

Supply And Fixing in replacement of DI Gear Operated Valve PN1.6 Epoxy coated with ssp & HW size 100mm incl 8 Nos 19.05mm dia ,100mm long Nut ,bolts, 2 nos washer incl 3 mm thick gasket of required size and shape complete for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified. and directed.

Supply And Fixing in replacement and testing of high pressure, heavy duty type cast steel Non Return,valve/ check valve, nominal size 150mm, PN 25 conforming to BS 1868, classs 600, Suitable to hydrostatic test pressure for body 156 KG /sq cm & for seat 115kg/cm, both ends flanged in existing line, after removal of old unservicable gate valve without damaging to exting pipe line complete all as specified and diected by Engr-in-charge. NOTE:- Suitable size MS Flange for exiting pipe line, joints and joining materials shall be including under this item.

Supply And Fixing in replacement and testing of high pressure, heavy duty cast steel sluice valve, nominal size 150mm, conforming to API 600, classs 600, Suitable to hydrostatic test pressure for body 156 KG /sq cm & for seat 115kg/cm, both ends flanged in existing line, after removal of old unservicable gate valve without damaging to exting pipe line complete all as specified and diected by Engr-in-charge. NOTE:- Suitable size MS Flange for exiting pipe line, joints and joining materials shall be including under this item.

M & L for Cutting down leaking piece of pipe 150 mm. Cut down the rusted & leaking portion , providing (i) new piece of MS Pipe of 150 mm upto 0.50 metre long. (ii) New union socket 150 mm - 1 Nos. (iii) Jointing the new pipe with existing old pipe by means of welding to make it leakproof including testing on completion complete all as specified and directed. Note:- Unit rate quoted shall be included for (a) Necessary excavation/earth work (b) New MS pipe 150 mm upto 0.50 metre length (c) union & socket 150mm - 1 Nos each. (d) welding etc complete including testing on complete.

M & L for Cutting down leaking piece of pipe 100 mm. Cut down the rusted & leaking portion , providing (i) new piece of MS Pipe of 100 mm upto 0.50 metre long (ii) New union socket 100 mm - 1 Nos. (iii) Jointing the new pipe with existing old pipe by means of welding to make it leakproof including testing on completion complete all as specified and directed. Note:- Unit rate quoted shall be included for (a) Necessary excavation/earth work (b) New MS pipe 100 mm upto 0.50 metre length (c) union & socket 150mm - 1 Nos each. (d) welding etc complete including testing on complete.

Construction of brick masonary pit of size 120x120x90 Cm internal size with MS Sheet 3MM Thick and angle iron frame of size 40x40x6mm duly painted with 2 cots of synthetic enamel paint over a coat of red oxide primer including locking arrangement with lock with 3 keys, lifting handle and includng excavation / earth work, PCC in foundation, brick work , plaster including demolaton of existing pit complete all as specified and directed by Engr- in-Charge.

M & L for PCC (1:3:6) type C2 using 40mm graded stone aggregate for anchorage blocks for pipe line/making good the cut portion of roads/paths/hard standings etc including necessary from work where required , to support the pipe line complete all as specified and as directed by Engineer-in-charge.

Amount of credit of Rs. 210370.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.