Military Engineer Services Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Military Engineer Services - MES Tender
Eprocure
Opening Date11 Nov 2024
Closing Date30 Nov 2024
Tender Amount₹ 49,14,000
Costs
EMD
₹ 98,280Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_683083_1Tender No
GE/863/EWS-T-43 OF 2024-25 PROVN AND SPECIAL REPAIR SANCTIONED WORKS UNDER GE 863 EWSTender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://defproc.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc., complete all as specified and directed.
0.65
-
-
Dismantling plain or corrugated roof sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.
291
-
-
S&F pre-painted galvalume aluminum zinc coating GI based corrugated/crimped steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
387
-
-
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
27.5
-
-
Demolition of precast concrete block walling masonary, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc., complete all as specified and directed.
17.5
-
-
M&L for 1:3:6 type C-1 precast cement concrete (20mm graded stone aggregate) block masonary with solid blocks exc 10 cm in width and not exc 20cm in width and setting in cement mortar 1:6, complete all as specified and directed.
43.1
-
-
M&L for precast cement concrete 1:2:4 type B-1 solid building blocks n exc 10 cm thick for partition etc. (with plain or interlocking joints as directed), set in cement mortar (1:6) complete all as specified and directed.
2
-
-
M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) complete as in levelling of floor etc, complete all as specified and as directed.
206
-
-
M&L for light shade Vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.
170
-
-
M&L for light shade Vitrified tiles 10mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement mortar over and including 10mm thick rendering as a backing coat rough finished in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
14
-
-
M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
73
-
-
M&L for glazed colour ceramic tiles of size 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surfaces/dado laid over and 10mm thick rendering as back coat rough finished in CM 1:4 etc. set and jointed in neat cement slurry and pointed in coloured cement with pigment complete all as specifed and as directed.
119
-
-
M&L for 20 mm thick Granite (of any type and colour) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl all moulding etc complete all as specified & as directed.
6.5
-
-
Taking down chowkats or frames not exc 1.5 sq.m each but with shutters (without taking off shutters from the frames), complete all as specified and directed.
14
-
-
Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames), complete all as specified and directed.
9
-
-
Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and removing complete all as specified and directed.
2
-
-
S&F Pressed steel frames made of MS sheet of profile 165 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.
33
-
-
S&F Pressed steel frames made of MS sheet of profile 125 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.
5
-
-
M&L for Cutting holes in stone/brick wall built in cement mortar or in cement lime mortar exc half bricks but not exc one brick thick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.
54
-
-
M&L for Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate span, cills, steps ; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, pressed steel frames, etc. and the like including weathering, slightly rounded or chamfered angles, throating and necessary form work complete all as specified and directed.
0.75
-
-
M&L for Forming jambs etc. built in cement mortor 1:6 to openings incl cutting toothing and properly bonding into to old work also facing, jointing and pointing to match to existing work complete all as specified and directed.
3.5
-
-
S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded wood grain printed PVC sheet ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of wood grain PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90) degree used and joined together with solvent cement, complete all as specified and directed.
6.4
-
-
M&L for solid PVC door frame of size 50x47mm made out of 5mm thick wood grain printed pvc sheet reinforced with MS square tube complete all as specified and directed.
18.75
-
-
S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, both faces are covered with decorative face veneer with lipping/frame to match complete all as specified and directed.
14
-
-
S&F 2nd class hard wood 35 mm thick Glazed and skeleton shutters for doors, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkat complete all as specified and directed.
8.5
-
-
S&F steel windows/ventilaor with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded, complete all as specified and directed.
6
-
-
All as per item No 29 here-in-before, but without glazing bars, complete all as specified and directed.
4
-
-
Supply and fabrication of framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, framework to support false ceiling grid and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
300
-
-
S&F Anodised aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
12
-
-
S&F Anodised aluminum window and ventilator shutters, side hung type without sash bars, aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
10
-
-
S&F Anodised aluminum grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainlesssteel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminum standard section around the opening, all complete as per requirement, specification and direction of Engineer-in- charge
14
-
-
S&F powder coated aluminum (minimum thickness of powder coating 50 micron) framework for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed.
32
-
-
S&F Powder coated aluminum (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete all as specified and directed.
55
-
-
S&F 4.8 mm thick tinted glass selected type quality n exc 0.5 Sqm in each pane for aluminum doors/ windows including rubber gasket/neoprene pad etc complete all as specified and directed.
8
-
-
S&F 4.8 mm thick tinted glass selected type quality exc 0.5 Sqm in each pane for aluminum doors/ windows including rubber gasket/neoprene pad etc complete all as specified and directed
15
-
-
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
10
-
-
S&F in Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.
6
-
-
S&F Wire netting of galvanised steel wire 0.91mm dia and size of mesh 12mm fixed with tinned tacks of stainless steel wire staples, complete all as specified and directed.
5
-
-
M&L for 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC/aluminum frame as per specifications complete all as per specified and directed.
5
-
-
S&F mortice brass lock vertical type size 100mm with 4 levers complete all as specified and as directed.
4
-
-
S&F double action floor spring hydraulically regulated made up of min 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty ISI Marked fixed in position, complete all as specified and as directed.
6
-
-
S&F aluminum (die-cast ) body door closer hydraulically regulated designation No 3 universal type, suitable fo door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.
4
-
-
M&L for application of Solar control film 25 micron reflective type (gareware sun control or equivalent) over glazing in door/window complete all as specified and as directed.
6
-
-
S&F 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed.
5
-
-
S&F 300mm length aluminum alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, complete all as specified and directed.
8
-
-
S&F 150mm aluminum handles, cast type, anodised and fixed with screws complete all as specified and directed.
34
-
-
S&F 125mm aluminum handles, cast type, anodised and fixed with screws complete all as specified and directed.
14
-
-
S & F 150mm aluminum, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.
8
-
-
S&F 200 mm aluminum, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.
36
-
-
S&F 100 mm Butt hinges, extruded aluminum alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 and fixed complete all as specified and directed.
29
-
-
S&F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.
2
-
-
S & F in repair Chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
4
-
-
S&F 150 mm Floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.
8
-
-
Taking down cement plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
280
-
-
M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed.
335
-
-
M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed.
221
-
-
M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over and incl a coat of cement primer complete all as specified and directed.
270
-
-
M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over and incl a coat of chalk whitening on walls, complete all as specified and directed.
51
-
-
M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
100
-
-
M&L for preparation of newly plastered surfaces of wall and apply two coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using paint roller technology over and incl 3 mm thick wall care putty and sanding the surface to prepare the surface even and smooth complete all as specified and directed.
145
-
-
M&L for Complete removal of existing treatment on surfaces of walls and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using paint roller technology over and incl 1 mm thick wall care putty and sanding the surface to prepare the surface even and smooth complete all as specified and directed.
130
-
-
M&L for Washing, rubbing down and stopping of old treated distempered and painted surfaces of walls and applying one coat of cement base paint complete all as specified and directed.
150
-
-
M&L for Washing, rubbing down and stopping of old treated distempered and painted surfaces of walls and applying one coat of oil bound distemper over wall putty complete all as specified and directed.
100
-
-
M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over and incl a coat of pink primer complete all as specified and directed.
48
-
-
M & L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over and incl a coat of red oxide primer complete all as specified and directed.
131
-
-
M&L for Preparation of old steel surfaces of any description, over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
8
-
-
Taking down wall panelling and similar work including framework on the wall, complete all as specified and directed.
85
-
-
M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed.
150
-
-
M&L Solid PVC Wall Lining consisting of 5mm thick single side
prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as per specified and directed.
85
-
-
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness inclduding cover fillets / frame, complete all as specified and directed.
147
-
-
S&F anodised aluminum snap grid of size 605 X 605 mm frame work for false ceiling including hangers 6mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.
277
-
-
M&L exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid (frame work for ceiling shall be measured and paid seprately) complete all as specified and directed.
277
-
-
S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed.
34
-
-
S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed.
30
-
-
S&F galvanised steel water tubes 25 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed.
30
-
-
S&F in repair Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed complete all as specified and directed.
4
-
-
S&F in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc fixed complete all as specified and directed.
4
-
-
S&F in repair wash basins of vitreous china, white, flat back of size 550x400mm, including brackets and cutting for and pinning in ends of brackets or erecting stand, 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and new brackets, complete all as specified and directed.
4
-
-
S&F Vitreous China bowl urinal flat back, size of 465x355x265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, and flush pipe ) including waste pipe 32mm dia bore fixed as in repairs complete all as specified and directed.
1
-
-
S&F 1mm thick stainless steel sink with drainage board, plugs, washers, PVC waste pipe, union, CP coupling & cantilever brackets embedded in cement and sand mortar in wall overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm fixed as in repair complete all as specified and directed.
2
-
-
S&F in repairs Brass chromium plated shower rose 125mm size for iron pipe or for unions and fixed to 15 mm bore steel tube, complete all as specified and directed.
3
-
-
S&F in repair Brass CP wall/WHB mixer for mixing hot & cold water screwed down for iron pipe of 15 mm bore and fixed complete all as spcified and directed.
8
-
-
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.
4
-
-
S&F in repair two way fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe and fixed, complete all as specified and directed.
4
-
-
S&F in repair Self-closing tap for urinal, cast copper alloy 15mm bore, chromium plated, screwed for iron pipe and fixed complete all as specified and directed.
1
-
-
S&F in repair pressure JET for EWC including PVC connection and CP fitting fixed in repairs complete all as specified and directed.
4
-
-
S&F in repair fancy type chromium plated, 15 mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
6
-
-
S&F in repair 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup, complete all as specified and directed.
21
-
-
S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.
21
-
-
S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified and directed.
10
-
-
Dismantling CI pipe alongwith fittings of 100/110mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified and directed.
30
-
-
Dismantling CI pipe alongwith fittings of 75mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified and directed.
23
-
-
S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed on wall with MS clamp complete all as specified and directed.
6
-
-
S&F 110 mm diaPVC SWR pipes single socketed in any length with rubber rings joints laid in trenches or in floors complete all as specified and directed.
24
-
-
S&F 75 mm dia PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors complete all as specified and directed.
33
-
-
S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed on wall with MS clamp complete all as specified and directed.
2
-
-
S&F PVC (SWR) bends any radius for 110mm bore pipe, complete all as specified and directed.
6
-
-
S&F PVC (SWR) bends any radius for 75mm bore pipe, complete all as specified and directed.
8
-
-
S&F PVC (SWR) junction single 110 mm bore, (Single T) equal or unequal, complete all as specified and directed.
3
-
-
S&F PVC (SWR) vent cowl for 110 mm bore pipe, complete all as specified and directed.
2
-
-
S&F 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
4
-
-
S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank alongwith float valve and fittings, etc., complete all as specified and directed.
2
-
-
S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank alongwith float valve and fittings, etc., complete all as specified and directed.
1
-
-
S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings, complete all as specified and directed.
1
-
-
S&F fancy type chromium plated, 15 mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
14
-
-
S&F 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup, complete all as specified and directed.
6
-
-
S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
5
-
-
S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed by Engr-in-Charge.
12
-
-
S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed by Engr-in-Charge.
5
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
15
-
-
S&F roof trusess (framed), verticle pole , trussed ,purlin, crane gantries rails and fastenings and heavy bracket framing (beam tee angle channel or flat section ) including distance pieces, cleats etc. confirming to Fe 410-W (grade -E-250) quality A complete all as specified and directed.
2850
-
-
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, etc. confirming to Fe 410-W (grade -E-250) quality A complete all as specified and directed.
625
-
-
S&F Mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment and fixing complete all as specified and directed by Engr-in-Charge.
50
-
-
S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
26
-
-
M&L 50 mm thick PCC 1:3:6 Type C-1 using 20mm crushed stone aggregate as in plinth protection, laid to a slope of 1 in 12 in a manner that top face shall conform to the finished level of PCC adjacent to the edging. PCC shall be laid in alternate bays (not exc. 2.5 meters length) and finished even and smooth without using extra cement. 6 mm wide joints shall be provided throughout the thickness of plinth protection in concrete bays at corners and turning points and also in between walling and plinth protection. All joints in bays, as well as between walling and the concrete in plinth protection shall be filled in with mastic filling comprising 1 part of heated bitumen 85/25 grade and 3 parts of sand (all by weight) complete all as specified and directed.
50
-
-
S&F stainless steel plate rack of standard pattern & of size 750x600x250mm thickness of stainless steel sheet shall be 304 AISI including fixing to wall with 4 nos 50 mm screws & pvc rawl plugs complete all as specifed and directed.
2
-
-
S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.
1
-
-
S&F in repair 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
4
-
-
S&F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.
4
-
-
M&L for precast reinforced cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggragate) as in cover slabs etc set in CM 1:4 incl necessary formwork complete all as specified and directed.
1.35
-
-
M&L for Reinforced cement concrete type B-1 1:2:4 ( using 20 mm graded stone aggragate) as in lintels over 1.5m clear span, beams and cantilevers complete all as specified & directed.
0.2
-
-
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
185
-
-
S&F mild steel TMT 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for stirrups, hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified & directed.
15
-
-
Dismantling of boarding of any description and in any position with screws, along with fittings complete all as specified and directed.
12.5
-
-
S&F prelaminated particle board of 18/19 mm thick one side decorative face of exterior grade as in wardrobe and cup board shutters and Shelves etc. complete all as specified and directed.
12.5
-
-
S&F Hasp and staple of aluminum anodized, safety type, 100mm long, fixed with screws complete all as specified and directed.
6
-
-
S&F 100mm size, extruded aluminum alloy handles, fabricated type, anodized and fixed with screws complete all as specified and directed.
8
-
-
S&F magnet catchment of specified shape and size for cupboard shelves in kitchen etc, complete all as specified and directed.
12
-
-
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified & directed.
1.5
-
-
M&L for Reinforced cement concrete (nominal mix) 1:2:4, type B1 ( 20 mm graded stone aggregate) as in chajja, shelves and the like complete all as specified and directed.
(Note :- Reinforcement shall be measured and paid separately under respective item).
0.15
-
-
Use and Waste of Formwork to chullah hoods, chajjas, troughs and similar items including edges not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
2.75
-
-
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified & directed by Engineer-in-charge.
35.63
-
-
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.
80
-
-
M&L for Excavation in post holes (or similar holes) each n.exc. 0.5 cum, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc. 50m and making good surfaces, complete all as speicified and directed.
18
-
-
Returning filling in soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed by Engineer-in-charge.
14
-
-
Removal of surplus soil to a distance n.exc 50 m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge.
25.48
-
-
M&L Cement concrete 1:2:4, type B-2 (40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed
2.25
-
-
M&L for P.C.C 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.
2.75
-
-
M&L for Hard core of gauge n exc 63mm thick of broken boulder spreading, leveling, watering, & well ramming to true surface complete all as specified and directed.
8
-
-
Demolition and breaking up drain pipes (Salt glazed stoneware, AC or Reinforced concrete) upto 150mm internal dia set in cement mortar complete all as specified and directed.
18
-
-
M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for 150 mm internal dia pipe complete all as specified and directed.
18
-
-
M&L for salt glazed stoneware drain pipes of 150 mm internal dia, laid in trenches and jointed complete all as specified and directed.
18
-
-
M&L coloured (Yellow and Red) machine made precast cement concrete tiles of (made of M-35 cement concrete) (Interlocking paver) 60mm thick with grey cement and pigment of approved design & pattern by GE, over 25mm thick sand cushion, complete all as specified and directed.
Notes:-
1. The interlocking joints shall be filled with fine sand.
2. Sand cushioning will be measured and paid seprately.
140
-
-
M&L 75 mm thick PCC in 1:4:8 type D-2 using 40mm stone aggregate as in sub base etc complete all as specified and directed.
166
-
-
Spreading and leveling soil n.exc 25cm thick incl well ramming in floors and watering as required complete all as specified and directed.
3.2
-
-
M&L for 40 mm thick Cement Concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. Note: - Water proofing compound will be measured and paid separately as supply only.
3.6
-
-
Supply only water proofing compound (WPC) of approved make, complete all as specified and directed.
2
-
-
M&L for Sand filling under floors or in foundations, including spreading, levelling, watering, well ramming and consolidation complete all as specified and directed.
3.5
-
-
Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, holders, etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.,complete all as specified and directed.
132
-
-
M&L for point wiring using approved colour coding as per IS with using approved colour coding as per IS 1.5 Sqmm multistranded, 1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC Casing and caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision PVC Box on top for fixing switches sockets etc. all as specified for one light point/ fan /Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge.
95
-
-
All as per Srl item No 153 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge.
27
-
-
All as per Srl item No 153 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge.
16
-
-
All as per Srl item No 88 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with cable 2.5 sqmm including provision of 1.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor complete all as per specified and directed by Engineer-in-Charge.
32
-
-
M & L for Switch piano, flush type single pole, one way 5 Amp, 230 volts, complete all as specified and directed.
138
-
-
Supply and fix Socket outlet 2 in 1, 3 pin, 5A, 230 volts, complete all as specified and directed.
43
-
-
M & L for Switch piano, flush type single pole, one way 15 Amp, 230 volts, complete all as specified and directed.
32
-
-
M & L for Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type, 230 volts, complete all as specified and directed.
32
-
-
S&F Bell push flush type 5/6 Amps complete all as specified and directed.
3
-
-
S&F Bell AC, ding-dong type, 230 volt single pole, complete all as specified and directed.
3
-
-
S&F stepped type electronic fan regulator flush type, complete all as specified and directed.
6
-
-
M&L Lamp holder, PVC/ Polycarbonate type with back plate suitable of angle/batten fittings, complete all as specified and directed.
16
-
-
Supply and fixing 9 watts LED lamp of 4 hours backup, with auto switch on mechanism in case of power failure, works as regular 9w lamp in normal mode and a 4w lamp in backup mode complete all as specified and directed by Engg-in-Charge.
7
-
-
Supply and fixing 9 watts LED lamp cool day white, B-22 AC, 240 volt, complete all as specified and directed by Engg-in-Charge.
9
-
-
Supply and fixing Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete all as specified and directed.
53
-
-
S & F LED light fitting 20W (4 feet), 220 volt AC, having colour temperature daylight (6500K), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
32
-
-
S & F LED light fitting 10W (2 feet), 220 volt AC, having colour temperature daylight (6500K), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
6
-
-
Supply and fix in replacement Sheet metal enclosure for DBs SPN 8 way, double door, 240 Volt, with 200 Amps rated bus bar with bus and neutral link, complete all as specified and directed.
3
-
-
Supply and fix Sheet metal enclosure for DBs SPN 8 way, double door, 240 Volt, with 200 Amps rated bus bar with bus and neutral link, complete all as specified and directed.
2
-
-
Supply and fix in replacement Sheet metal enclosure for DBs SPN 12 way, double door, 240 Volt, with 200 Amps rated bus bar with bus and neutral link, complete all as specified and directed.
1
-
-
Supply and fixing in replacement 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB complete with connection, testing and commissioning, complete all as specified and directed.
23
-
-
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB complete with connection, testing and commissioning, complete all as specified and directed.
12
-
-
Supply and fixing in replacement miniature circuit breaker (MCB) SPN 40 AMP rating 240V, 10KA 'C' curve in the MCB DB complete with connection, testing and commissioning, complete all as specified and directed.
4
-
-
Supply and fixing miniature circuit breaker (MCB) SPN 40 AMP rating 240V, 10KA 'C' curve in the MCB DB complete with connection, testing and commissioning, complete all as specified and directed.
2
-
-
Supply, laying and testing in replacement LT UG XLPE insulated, armoured heavy duty electric cable with aluminum conductor, 1100 volts grade, cross-sectional area 16 Sq mm 2 core as per IS specifications laid through GI pipe/ floor/ wall complete all as specified and directed by Engr-in-charge.
130
-
-
Supply, laying and testing LT XLPE service cable, PVC insulated, armoured heavy duty electric cable with aluminum conductor, 1100 volts grade, cross-sectional area 10 Sq mm 2 core as per IS specifications complete all as specified and directed by Engr-in-charge.
26
-
-
S&F in replacement of GI Tube 50 MM bore Light Grade laid in trenches under road or fixed to wall as mechanical protection for UG Cables complete all as specified and as directed.
20
-
-
Supply & laying in replacement of HDPE Pipe 40 MM outer diameter of pressure rating 6 kgf/sqcm laid in trenches under road or fixed to wall as mechanical protection for UG Cables complete all as specified and as directed.
50
-
-
M&L in replacement Sheet metal enclosure, SPN, with two pin and earth plug and socket complete with one single pole and neutral MCB 20 Amp , 10 KA complete all as specified and directed.
3
-
-
M&L in replacement for Earthing complete with GI steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to GI earth wire of 4 mm dia protected by GI protection pipe light grade of 40mm bore dia from mechanical injury, 20 mm medium grade for watering with funnel, including test point up to 7.5 meter from earth pit, adequate quantity of common salt, charcoal dust, chemical and connected to test point by means of bolts and nuts washers made out of GI all as shown in Electrical plate No 3 of SSR part I including necessary earthwork and excavation in any type of soil, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type mix cover slab with 6mm dia MS bars at 100mm dia both ways with MS hook 6mm dia MS bars etc. complete all as specified and directed by Engr-in-charge.
Note: 1. Suitable quantity of charcoal, common salt, funnel, GI pipe required for watering, pit & CI pit cover etc is deemed to be included in quoted rate and lead wire used beyond 7.5m from pit cover will be measured separately.
2. On testing after completion if the desired resistance is not obtained the earthing shall be re-done at no extra cost.
4
-
-
Supply and fix exhaust fan, Steel body AC single Phase 230V of size 300mm sweep with blades, frame and louvers, complete all as specified and directed by Engineer-in-Charge.
8
-
-
S&F for ceiling fan 1200 mm sweep, 230 V, complete with three blades, down rod, electric regulator, and accesories, having minimum air delivery 120 CFM with service value 6.00 BEE five star rated with Brushless Direct Current Motor (BLDC) with remote control complete all as specified and directed by Engr-in-charge.
7
-
-
Taking down old Geyser and deposited to MES store and refixing the same, complete all as specified and directed.
3
-
-
Taking down old ceiling / wall fan and deposited to MES store and refixing the same, complete all as specified and directed.
3
-
-
Supplying, laying, testing and drawing in replacement of submain wiring on walls 02 runs of IC x 6.00 sqmm (Main cable and neutral) and one run of IC x 6 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade confirming to IS : 694 of 1990 including surface PVC rigid casing caping / conduit pipe or as directed including connection complete all as specified and directed.
30
-
-
S & F in replacement of SKYLUX LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC, having colour temperature daylight (6500K), Ultra modern recess mounting luminaire with high performance, efficiency PMMA diffuser soft glare free light complete with driver, holder and LEDs, suitable for mounting with Armstrong / Grid ceiling, white powder coated CRCA housing with LEDs, seamless front frame with white colour flat acrylic cover, including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
10
-
-
S & F SKYLUX LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC, having colour temperature daylight (6500K), Ultra modern recess mounting luminaire with high performance, efficiency PMMA diffuser soft glare free light complete with driver, holder and LEDs, suitable for mounting with Armstrong / Grid ceiling, white powder coated CRCA housing with LEDs, seamless front frame with white colour flat acrylic cover, including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
10
-
-
Returning and filling in soil in two parts:-
(i) Using riddled soil obtained from excavated soil up to depth of 30 cm (8cm below cable and remaining above cable for cushioning of cable,
(ii) refilling the trench of remaining depth with normal excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed by Engineer-in-charge.
Note:- Excavated soil shall be riddled by using sieve to separate composite particles etc., as per IS 1255-1983 and refilling in trenches as in cable cushioning.
4.95
-
-
Schedule of Credit
-
-
-139027.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%