Military Engineer Services Tender

Supply lay/spread in trenches, river sand ,clean, including spreading, levelling, punning for laying /cushioning of cables, Complete all as specified and directed by Engr-in-Charge.

Supplying and laying in trenches fly ash bricks, old size sub class “B” for cable protection, Complete all as specified and directed by Engr-in-Charge.

Supplying and laying in trenches (Incl Dismantling/ Taking Down), floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape , of following nominal cross sections, confirming to IS specifications, Complete all as specified and directed by Engr-in-Charge. :-

3.5 Core Core 95 Sq.mm

3.5 Core Core 50 Sq.mm

3.5 Core Core 35 Sq.mm

4.0 core 25 sq mm

Supplying and fixing/laynig (Incl Dismantling/ Taking Down) on pole / wall or lay in trenches under road / drain crossings etc., for drawing cables, GI pipe light grade , ISI marked ,of following sizes including necessery pipe ,fittings ,clamps, bolts , nuts etc., confirming to IS specifications, Complete all as specified and directed by Engr-in-Charge. :-

50 mm bore dia

Supply & fixing in repair rating 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 To 100 AMP current carrying capacity in the DB complete with connection testing and commissioning.

Supply & fixing in repair rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP current carrying capacity in the MCB DB complete with connection testing and commissioning

Supply & fixing in repair rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP current carrying capacity in the MCB DB complete with connection testing and commissioning

Supplied & fixed sheet metal enclouser for DB double door SPN DB 8 way complete all as specified and dircted.

Supplying and fixing in repair (Incl Taking Down/ Dismantling) 1100 volt grade heavy duty cable PVC insulated alluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart incl 4mm suspension wire 2 core cable flat 16mm square, confirming to IS specifications, Complete all as specified and directed by Engr-in-Charge.

M&L Electrical Earthing complete with GI plate Electrode of size 60 Cm X 60 Cm X 6.3 mm thick burried directly in ground vertically at a depth not less than 2.25 mtr. below normal ground level, with top edge of earth plate at a depth not less than 1.5 mtr. below normal ground level , connected to Aluminum strip of size 25 X 3 mm earth lead by means of bolts, nuts and washers of galvanised iron , earth lead strip protected by means of 32 mm bore dia light grade GI pipe up to switch board / panel board , all as specified and shown in MES schedule Electrical Plate No:-5 of SSR Part I, including excavation and earth work in any type of siol , PCC 1 : 2 : 4 type C1 in chamber , RCC 1:2:4 type C1 40 mmthick cover slab with 6 mm dia MS bars at 100 mm centre to centre both ways,with 6 mm dia MS hook, Charcoal dust, salt , funnel for watering complete and testing the Earth resistence and writing on the chamber by paint, confirming to IS specifications, Complete all as specified and directed by Engr-in-Charge.

Cement concrete type c2 40 mm graded stone 1:3:6 in foundations,filling and mass concrete, Complete all as specified and directed by Engr-in-Charge.

M & L for cutting exisitng bitumenous road surfaces not more than 150 mm thick, removing for laying of pipes/cables, making good with PCC 1:3:6 type C1 20 mm graded aggregate to match with the adjustant surface. Note Excavation and earth work below 150 mm thick will be measured and paid under relevent items, confirming to IS specifications, Complete all as specified and directed by Engr-in-Charge.

supply and fix in repair HDPE couregated Pipe 40/50 mm, confirming to IS specifications, Complete all as specified and directed by Engr-in-Charge.

supply and fix HDPE in repair couregated Pipe 90/110 mm, confirming to IS specifications, Complete all as specified and directed by Engr-in-Charge.

Taking down old and UNSV DBs SPN/TPN complete with MCB TPN/SPN/SP, confirming to IS specifications, Complete all as specified and directed by Engr-in-Charge.

supply and fix in reapir on load change over 200 amp incl bus bar, confirming to IS specifications, Complete all as specified and directed by Engr-in-Charge.

supply and fix in Repair load change over 100 amp incl bus bar, confirming to IS specifications, Complete all as specified and directed by Engr-in-Charge.

Supply and fixed in repair for MCCB 3 Pole, 415 V,type, 200 Amps with breaking capacity 16 KA, confirming to IS specifications, Complete all as specified and directed by Engr-in-Charge.

Supply and fixed in repair for MCCB 3 Pole, 415 V, type, 250 Amps with breaking capacity 16 KA, confirming to IS specifications, Complete all as specified and directed by Engr-in-Charge.

Supply and fixed in repair for MCCB 3 Pole, 415 V,type, 400 Amps with breaking capacity 16 KA, confirming to IS specifications, Complete all as specified and directed by Engr-in-Charge.