Military Engineer Services Tender
... More
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Military Engineer Services - MES Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date7 Feb 2025
Closing Soon28 Feb 2025
Tender Amount₹ 49,00,000
Costs
EMD
₹ 98,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Repair Replace Of Lt Panels Mccbs Ug Cable Led Floodlights Fittings And Other Misc Connected Works And Repair Replace Of Damaged Unsv Water Supply Line Off Size Pump Cleaning Of Sump Repair To Machinery And Other Connected Works At Plp Mil Stn
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_688908_2Tender No
GEP-73/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Sand cushioning to under ground cable with a layer of sand 8 cm before laying the cable and 15cm after laying the cable (10 cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed.
56.7
-
-
... More
M&L old size brick class "B" as in cable protection laid dry,flat,transversally along the length of cable on sand cushioning with width equalto length of the brick complete all as specified and as directed.
6.08
-
-
... More
Taking down old unsv security light fitting, flood light, high mast light and decorative LED light fitting of any wattage from poles / roof at any position and dismantling the light fitting and replace the unsv driver, PCB card and reassemble at the existing bracket and refixing the same complete all as directed. (Note LED driver and PCB card will be measured and paid seperately as supply only)
100
-
-
... More
Supply only LED driver suitable for LED street light fittings of 45 watt complete.
30
-
-
... More
Supply only LED driver suitable for LED street light fittings of 60 watt complete.
30
-
-
... More
Supply only LED driver suitable for LED street light fittings of 90 watt complete.
30
-
-
... More
Supply only LED driver suitable for LED street light fittings of 120 watt complete.
30
-
-
... More
Supply only PCB Card suitable for Multi LED Light Fitting of capacity 45 Watt complete all as specified and as directed.
20
-
-
... More
Supply only PCB Card suitable for Multi LED Light Fitting of capacity 60 Watt complete all as specified and as directed.
30
-
-
... More
Supply only PCB Card suitable for Multi LED Light Fitting of capacity 90 Watt complete all as specified and as directed.
25
-
-
... More
Supply only PCB Card suitable for Multi LED Light Fitting of capacity 120 Watt complete all as specified and as directed. NOTE : FOR ITEM No. 07 TO 14 MAKE of Electronic Driver and PCB card shall be provided as per Light Fittings make available at Site.
20
-
-
... More
S&F in replacement 120 Watt LED flood light (Red, Green and Worm White colour) fitting made up of Pressure die-cast aluminium alloy housing with toughened glass, IP65 protection and impact resistance of IK07 and individual high power LEDs with secondary optics having system lumen efficiancy ≥100 lm/W, Inbuilt potted electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Over Voltage protection, Surge Voltage protection & other safety test as per IS 15885 Part-2/Sec 13 and BIS complying including surface mounting using adjustable MS cradle of thickness 5 mm provided with the fixture including taking down existing unserviceable flood light fitting of any description complete all as specified and directed. Note :- LM 79 test report, LM 80 report with minimum 9000 hrs testing to support 50K life TTC and driver NABL accreditated report shall be submitted before execution of work to the Engineer - in - charge.
20
-
-
... More
All as per Serial Item No. 15 here-in-before but of 100 Watt LED flood light fitting.
25
-
-
... More
All as per Serial Item No. 15 here-in-before but of 70 Watt LED flood light fitting.
20
-
-
... More
All as per Serial Item No. 15 here-in-before but of 50 Watt LED flood light fitting.
15
-
-
... More
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core 10sq. mm nominal cross section in service connections complete all as specified and as directed.
200
-
-
... More
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core 16sq. mm nominal cross section in service connections complete all as specified and as directed.
200
-
-
... More
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 core 16sq. mm nominal cross section in service connections complete all as specified and as directed.
200
-
-
... More
Supply, fixing & testing 60W LED street light fitting IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewired and suitable fixing arrangement for mounting on existing MS frame bracket including connecting the fitting complete all as specified and directed including taking down complete all as specified and directed.
(Make- Philips Cat No BRP032 LED60 CW / WW SLR GR PSU Bajaj Cat Part No ENXT P 72L WH CR PC SD/Havells Cat part No ENDURAPEARLNEOSL 60WLED757PASYTOPCAST)
Note : GI pipe bracket and clamps if required shall be measured and paid separately.
20
-
-
... More
Supply and fix LED curb stone light ( RED,Yellow, Blue ,White , Amber,Green) fittings of length 500mm, height 200 mm and width 150 mm, with curb angle 45 degree, operating voltage 36 volts DC power supply, having foundation hight 40mm, foundation width 20 mm, foundation stand hole 10 mm dia with 2 Nos of foundation rod having 8 mm dia to make curb stone theft proof and immoval,with load carrying / bearing capacity upto 800 Kgs , in each curb stone LED strip length 465mm , Nos of LED in each strip 22, power consumption 2.34W per curb stone having one connectors with 2 Nos (1 male & 1 Female) with 2 core wire complete all as specified and directed by Engineer in charge.
10
-
-
... More
S&F LED Tricolor (Orange/White/Green) 3 in 1 Tiranga Single Strip Light with 10 Meter length,LED Decorative Pole Lighting Etc-Pack of 1,IP 65 rating withstand harsh weather poof complete all as specified and directed by Engr in charge.
50
-
-
... More
M & L for GI Pipe light grade complete with fittings laid in floor/ trenches/ wall as cable protection of 50 mm dia all as specified and directed.
50
-
-
... More
M & L for GI Pipe light grade complete with fittings laid in floor/ trenches/ wall as cable protection of 80 mm dia all as specified and directed.
30
-
-
... More
Supply and fixing outdoor type control with Photo Sensitive smart sensor LED street light fitting 90 Watt 230 V AC outdoor type & high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics & suitable connection with photoelectric sensor complete with IP 65/66 protection complete all as specified.
10
-
-
... More
Supply and fixing outdoor type control with Photo Sensitive smart sensor LED street light fitting 70 Watt 230 V AC outdoor type & high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics & suitable connection with photoelectric sensor complete with IP 65/66 protection complete as specified
10
-
-
... More
S&F in repairs rigid non-metallic PVC conduit of 20 mm dia heavy duty along steel tubular swaged poles for wire from junction box to fittings fixed with 04 Nos MS clamps complete all as specified and directed.
500
-
-
... More
S&F 40 mm dia GI light grade pipe 1.2 m long with bracket bent to shape by cutting & welding as required & directed and fixed to pole with two Nos of FI clamps 40x5 mm to be tightened with bolts, nut and washers and including painted with two coat of aluminium paint over a coat of red oxide primer complete all as specified and directed.
40
-
-
... More
S&F in replacement voltmeter for LT panel Square dial of size 96x96mm digital type complete all as specified and as directed. (Note: Existing meter analough type and large in size, hence any modification in the wiring and panel sheet enclosure is deemed to be inclusive in the scope of work).
4
-
-
... More
S&F in replacement Ammeter for LT panel Square dial of size 100 mm digital type complete all as specified and as directed. (Note: Existing meter analough type and large in size, hence any modification in the wiring,and panel sheet enclosure is deemed to be inclusive in the scope of work).
4
-
-
... More
S&F in replacement indicator lamp assembly in red,yellow & blue colour for LT panels complete all as specified and as directed.
30
-
-
... More
Taking out from trenches/floors/road/wall/pipe/pole LT cable of any size/description and removing from site incl making good the disturbed surfaces to match with existing surface all as directed.
900
-
-
... More
Supply and laying or fixing or passing through pipe or laid in trenches, 1100 Volt grade heavy duty cable XLPE insulated, armoured electric cable with aluminium conductor ,cross-sectional area 95 sq.mm 3.5 core complete all as directed.
200
-
-
... More
Supply and laying or fixing or passing through pipe or laid in trenches, 1100 Volt grade heavy duty cable XLPE insulated, armoured electric cable with aluminium conductor ,cross-sectional area 70 sq.mm 3.5 core complete all as directed.
150
-
-
... More
Supply and laying or fixing or passing through pipe or laid in trenches, 1100 Volt grade heavy duty cable XLPE insulated, armoured electric cable with aluminium conductor ,cross-sectional area 50 sq.mm 3.5 core complete all as directed.
150
-
-
... More
Supply and laying or fixing or passing through pipe or laid in trenches, 1100 Volt grade heavy duty cable XLPE insulated, armoured electric cable with aluminium conductor ,cross-sectional area 16 sq.mm 4 core complete all as directed.
200
-
-
... More
Supply and laying or fixing or passing through pipe or laid in trenches, 1100 Volt grade heavy duty cable XLPE insulated, armoured electric cable with aluminium conductor ,cross-sectional area 10 sq.mm 2 core complete all as directed.
200
-
-
... More
M&L HDPE double wall corrugated pipe of size 63mm outer dia and 50mm inner dia confirming to IS:14930 Part-II including necessary pipe fittings such as couplers, end caps, bend etc. including fixed to wall/roof /pole/trench as required with suitable clamps for cable protection complete all as specified and directed.
150
-
-
... More
M&L Boring of holes under road, pavement, hard standing by Manually up to size 80 mm complete all as specified and directed.
50
-
-
... More
M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in foundation including necessary form work complete all as specified and directed.
2
-
-
... More
S&F in repairs cable junction box made of thermoplastic, halogen free, weather proof with metric Knock outs for cable entry including four/five pole terminals and cable entry glands for incomming, out going and connection cable with protection grade IP-66/67 of size 205x255x112 mm and suitable for LT under ground cable any size/capacity including bracing clamp,bolts,nuts & washers complete all as specified
100
-
-
... More
S&F connector suitable for fixing of cable of size as per site for armoured/PVC for preventing of short circuiting of cable in Junction Boxes, complete all as specified and as directed.
40
-
-
... More
S&F in replacement of MCCB 400 Amp rating,4-pole 415V, 50 Hz breaking capacity 36 KA, Adjustable & fixed magnetic setting type complete all as specified and directed.
2
-
-
... More
S&F in replacement of MCCB 250 Amp rating,4-pole 415V, 50 Hz breaking capacity 36 KA, Adjustable & fixed magnetic setting type complete all as specified and directed.
4
-
-
... More
S&F in replacement of MCCB 200 Amp rating,4-pole 415V, 50 Hz breaking capacity 25 KA, Adjustable & fixed magnetic setting type complete all as specified and directed.
5
-
-
... More
S&F in replacement of MCCB 125 Amp rating,4-pole 415V, 50 Hz breaking capacity 16 KA, Adjustable & fixed magnetic setting type complete all as specified and directed.
5
-
-
... More
S&F in replacement of MCCB 100Amp rating,4-pole 415V, breaking capacity 16KA complete all as specified and directed.
4
-
-
... More
Demolition of concrete (coping of pole/Road) of any description and in any position complete all as specified and directed.
8
-
-
... More
M&L PCC 1:3:6 C-2 (using 40mm graded crushed stone aggregate) as in coping of electric poles, etc. including weathering slightly rounded or chamfered angle and throating, finishing all exposed faces of concrete with necessary formwork complete all as specified and as directed.
8
-
-
... More
S&F in repairs time digital switch with built in PCB for street light complete all as specified.
4
-
-
... More
S&F empire tape of 20 mtr length to insulate electrical wires and other material in different colour (Red,yellow, blue and black) complete as as specified and directed.
50
-
-
... More
Material and labour for removal green vegetation and dressing around the poles plinth/copping/PCC hardstanding up to 1.5 mtr of pole structure etc including disposal of vegitation /material up to 50 mtr distance from the site and levelling/surfacing the ground all as specified and as directed.
2000
-
-
... More
Trimming / chopping and cuting of branches each tree of any grith which are coming across/around the security light pole /fitting up to 3 meter all sides of the poles etc as required and removing the same from site of work complete all as directed by Engr in charge.
2800
-
-
... More
M&L painting to 9 mtr long steel tubular security/street light pole with Black & White strip 30 Cm a part alternaterly up to 1.5Mtr height from ground level with synthetic enmel paint with two coats of aluminium paint after removal of all dust from outer surface of the pole including numbering of pole complete all as directed.
100
-
-
... More
M&L earthing complete with galvanised steel earth plate electrode 60cmX60cmX6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not than 1.5mtr below normal ground level connected to GI earth strip of size 32x6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC M-10(Nominal mix) using 20mm graded stone aggregate, 50mm thick earth pit cover of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape, PGI funnel, wire mesh and 20mm bore GI water pipe medium grade and 40mm bore medium grade GI pipe for protection of earth strip from plate to main switch board, common salt, charcoal dust including testing on completion complete all as specified and as directed all as shown in electrical plate No. 3 including testing on completion and making good the disturbed surfaces of wall floors etc without claiming extra cost all as directed by Engr-in-Charge. (Note: GI strip & GI pipe beyond 7.5Mtr length from earth electrode shall be measured and paid separately).
10
-
-
... More
S&F in replacement LT panels door made of MS sheet to 16 SWG including fabrication to required shape and size by cutting /bending /welding including butt hinges and locking arrangement handle for doors as directed with two coats of synthetic enamel paint on both side over a coat of red oxide primer complete all as specified and directed.
20
-
-
... More
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in deep for foundation, taking up/down or laying of GI tubing/CI pipe etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified & directed.
143
-
-
... More
Taking up or down GI tubing including all fittings from trenches , wall, floor etc of size 100 mm bore complete all as specified and directed.
50
-
-
... More
All as per ser item No. 60 here -in-before but for of size 80 mm bore, complete all as specified and directed.
100
-
-
... More
All as per ser item No. 60 here -in-before but for of size 50 mm bore, complete all as specified and directed.
150
-
-
... More
All as per ser item No. 60 here -in-before but for of size 40 mm bore, complete all as specified and directed.
100
-
-
... More
All as per ser item No. 60 here -in-before but for of size 25 mm bore, complete all as specified and directed.
80
-
-
... More
Taking up or down 100 mm bore CI/DI pipes including all fittings with spigot and socket ends / flanged ends including taking out lead joints and rubber joints from trenches/floor, removing the pipe from site complete all as specified. Note : Excavation and earth work shall be measured and paid separately wherever reqd at site.
50
-
-
... More
All as per ser item No. 65 here -in-before but for of size 150 mm bore, complete all as specified and directed.
80
-
-
... More
Supplying, laying, jointing and testing 25 mm bore galvanised steel water tubing medium grade (ISI marked) laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, tees, elbow sockets, nipples & unions, flanges etc complete all as specified and directed. Note : (a) Earth work shall be measured & paid under relevant item. (b) The cost of new fitting alongwith cutting, threading as required at site shall be deemed to be included in the rate quoted.
80
-
-
... More
All as per ser item No. 67 here -in-before but for of size 40 mm bore, complete all as specified and directed.
100
-
-
... More
All as per ser item No. 67 here -in-before but for of size 50 mm bore, complete all as specified and directed.
150
-
-
... More
All as per ser item No. 67 here -in-before but for of size 80 mm bore, complete all as specified and directed.
100
-
-
... More
All as per ser item No. 67 here -in-before but for of size 100 mm bore, complete all as specified and directed.
50
-
-
... More
M&L Ductile iron pipe (Conforming to IS: 8329) with spigot and socket ends of bore 100mm special class K-9 suitable for tyton joint including jointing material/ joints laid in trenches complete all as specified and directed.
50
-
-
... More
All as per ser item No. 72 here -in-before but for of size 150 mm bore, complete all as specified and directed.
80
-
-
... More
M&L CI/DI fittings any type such as bends (any type radius and angles), reducers ,Tees, Y pieces, collars caps, plugs and straight connecting pieces 100 mm to 150 mm dia complete all as specified and directed by Engr-in-charge.
400
-
-
... More
S&F Cast iron sluice valve long body type, both ends flanged and drilled, of size 100 mm bore, (ISI marked) conforming to IS-14846 -2000 with pressure rating of PN-1.6 with steel spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc, including taking down old unserviceable sluice valve complete all as specified and directed.
1
-
-
... More
S&F Cast iron sluice valve long body type, both ends flanged and drilled, of size 150 mm bore, (ISI marked) conforming to IS-14846 -2000 with pressure rating of PN-1.6 with steel spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc, including taking down old unserviceable sluice valve complete all as specified and directed.
2
-
-
... More
S&F Cast iron sluice valve long body type, both ends flanged and drilled, of size 200 mm bore, (ISI marked) conforming to IS-14846 -2000 with pressure rating of PN-1.6 with steel spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc, including taking down old unserviceable sluice valve complete all as specified and directed.
2
-
-
... More
S&F Cast iron sluice valve long body type, both ends flanged and drilled, of size 250 mm bore, (ISI marked) conforming to IS-14846 -2000 with pressure rating of PN-1.6 with steel spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc, including taking down old unserviceable sluice valve complete all as specified and directed.
2
-
-
... More
S&F in repair gun metal gate valves with iron wheel head screwed both ends for GI pipe of size 50 mm complete all as specified and directed.
6
-
-
... More
All as per ser item No. 79 here -in-before but of size 32 mm bore, complete all as specified and directed.
8
-
-
... More
All as per ser item No. 79 here -in-before but of size 25 mm bore, complete all as specified and directed.
6
-
-
... More
Cutting of existing 150mm bore cast iron pipe in position to required length for repairs of blockage or insert new CI fitting such as collers, branches,tee etc or pipe complete all as specified and directed. Note:- Excavation and earth work,fittings,pipe etc shall be measured and paid saperately.
6
-
-
... More
Dismantling of existing brick masonry valve pit of any size and type and stacking serviceable materials for issue to contractor on credit and removal of unserviceble materials from site complete all as specified and directed.
9
-
-
... More
M&L masonry valve pit of size 90X90X90cm (Internal dimensions of chamber) built in Cement Mortar 1:6, Plain cement concrete, M-10 (Nominal mix) type C-2 (using 40 mm graded crushed stone aggregates) as in foundation filling and mass concreting and including 15mm thick plastering internally with cement mortar 1:6 and flush pointing externally as the work proceeds in same mortar and Plain cement concrete, M-15 (Nominal mix), type B-1, (using 20mm graded crushed stone aggregates) as in coping complete. 3.15 mm thick MS sheet cover, handle, locking arrangement including provision of angle iron frame 40x40x6 mm for cover and 2 foot steps made out of MS 16 mm dia round bars, wash out pipe made out of GI pipe medium grade, 50 mm dia upto 1 metre length, earth work in any type of soil including removal to a distance not exceeding 50 metre and painting steel surface with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-charge.
5
-
-
... More
All as per descrption of ser item No 83 above but of size 1.20 x 120x120cm complete all as specified and directed.
4
-
-
... More
Cleaning of Sedimentation tank (appx size - 3.3 m x 3.3 m x 4.10 m-(Split into two eqal part-5000 Glns capacity each) at pump house by taking out the mud, silt/sand and other partical (approximately depth 0.50 mtr) by any means from bottom of tank and removing the waste material to a distance not less than 50m and spreading/levelling complete all as directed, washing and scrubing down of algae/scales/dirt/vegetation and shrubs from the inside walls of tank with wire brush, washing with lime mixed water including applying two coats of white wash on inside walls of tanks after preparation of surface and providing a block of size 90x60cm on external surface of wall with black synthetic enamel paint including writing the same with white paint, complete all as specified and directed by Engr-in-charge for the following :- (i) Capacity of tank , (ii) Tank cleaned on date
2
-
-
... More
All as per description of ser item No. 85 here -in-before but clear water (supply tank) Semi UG sump type of capacity 50000 Gallon for Snow View old quarters & Inf Bn.
8
-
-
... More
All as per description of ser item No. 85 here -in-before but clear water (supply tank) Semi UG sump & OH tank type of capacity 1 Lakh Gallon for filling water into O/H reservoirs of different area.
6
-
-
... More
M&L repairing to centrifugal pump set of capacity 20/30 HP incl taking out from foundation bed, removing electric connection etc and transport to wksp for re-winding of motor with super enameled insulated copper winding wire as per existing gauge and replacement of thrust bearing, impeller, MS bush, nut & bolts as required for pump set including oiling, greasing and re-installing pump & motor set and testing at site, complete all as specified and directed.
2
-
-
... More
M&L taking up/out Submersible pump motor set capacity 12.5 HP, 3 phase from Bore Well including column pipe after disconnecting complete electric connection and transporting to civil workshop for repair/overhauling including stacking column pipe properly at site for reuse complete all as directed by Engr-in-Charge.
1
-
-
... More
M&L stripping out squirrel cage, induction motor of capacity 15/20 HP, 3 phase 415 volts AC 50 centrifugal starter and rotor cleaning up internally and externally including removing old burnt copper wire, worn out bearing and rewiring/ rewinding with new copper wire, including necessary transportation workshop and bring back to the installation and assembling, testing and commissioning of motor complete etc., all as specified and directed.
1
-
-
... More
S&F in replacement of mechanical joint suitable for 100 mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed.
2
-
-
... More
All as per ser item No 91 here-in before but for of size 150 mm bore complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
All as per ser item No 91 here-in before but for of size 200 mm bore complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
All as per ser item No 91 here-in before but for of size 250 mm bore complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
S & F in replacement PVC Star coupling of best quality suitable for 20/30 HP Induction motor shaft as per site including taking out old un-serviceable one complete all as specified and directed
6
-
-
... More
S & F in replacement ball/float valve high pressure of PTMT with epoxy coated alumunuium rod and high density plastic ball screwed for 15 mm bore GI tubing complete all as specified and directed.
60
-
-
... More
All as per ser No 96 here-in before but for of size 20 mm complete all as specified and directed
150
-
-
... More
All as per ser No 96 here-in before but for of size 25 mm complete all as specified and directed
150
-
-
... More
S&F wall mounting type panel with automatic Star delta starter suitable for 22 KW motor of appropriate size as reqd at site with overload relay of range 20-32 Amps, power contrctors of suitable capacity, timer range and single phase preventor, ON/OFF actuators etc with MCCB 100 Amp, 4 Pole, 25 KA as main switch including taking down old un-serviceable panel complete all as specified and directed. Make- BCH/L&T/Benlo or equivalent as approved by GE.
1
-
-
... More
S&F MS Cover of 3.0 mm thick sheet having angle iron (50x50x6mm) with Hook, Hold fast, Hinge etc. and painting it with one coat of black paint suitable for 1.2 x1.2 mtr valve pit size including taking out old un-serviceable MS cover of any type and size obtained at site complete all as specified and directed.
6
-
-
... More
S&F MS Cover of 3.0 mm thick sheet having angle iron (50x50x6mm) with Hook, Hold fast, Hinge etc. and painting it with one coat of black paint suitable for 0.90x0.9 mtr valve pit size including taking out old un-serviceable MS cover of any type and size obtained at site complete all as specified and directed
4
-
-
... More
M&L to prevent leakage of water pipe line at various places including required material by welding of flanged/socket/collar or at the joint of sluice valve/air release/none returne valve or damaged pipe line etc including excavation/returning and filling complete all as specified and directed.
18
-
-
... More
S&F PVC heavy duty pipe of size 65 mm dia including fittings complete all as specified.
200
-
-
... More
M&L development of Tube well (Bore well) with compressed air and after with 25% extra capacity pump by pumping muddy water complete all as specified.
24
-
-
... More
M&L yield test for the tube well (Bore well ) by continously pumping to determine safe pumping yield complete all as specified and directed.
1
-
-
... More
M&L cleaning away all grass ,vegetation, saplings ,shrubs ,brushwood, under growth, roots, and trees not exceeding 30 cm girth(measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance complete all as specified and directed.
1200
-
-
... More
Collecting the sample of water from different point such as under ground sump, Open well, Bore well for chemical and bacteriological testing of water from authorised govt lab for iron content in water, PH value, Hardness, turbidity, choride, fluoride and other parameters as per IS standrads.allas specified and directed
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%