Military Engineer Services Tender

Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed

M&L in trenches for sand cushioning for under ground cables complete all as specified and directed by Enger-in-Charge.

Material and labour for sub class (B* brick, old size, brick covering laid dry, flat transversally along the length of cable on sand cushioning, with width equal to the length of the brick complete all as specified and directed.

Material & Labour PCC 1:4:8 type D2 ( using 40mm graded stone aggregate) as in bottom of pit in bed concrete of poles complete all as specified.

Material & Labour PCC 1:3:6 type C2 ( using 40mm graded stone aggregate) as in foundation of poles and stay etc complete all as specified.

Material & Labour PCC 1:2:4 type B2 ( using 40mm graded stone aggregate) as in coping for Poles etc complete all as specified.

M&L for Structural steel work in replacement of existing unserviceable Cross arms bracing, supports, clamps and back plates fabricated from steel sections including nuts,bolts ,washers,welding ,bending cold or hot drilling holes for bolts in any shape or size as indicated or directed inclusive one coat of primer coat, one under coat and one finishing coat of aluminium paint complete all as specified and directed.

Material and labour for replacement of existing unserviceable GI tubing light grade 50 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed .

Material and labour for replacement of existing unserviceable GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed .

M&L for replacement of old and weathered ACSR alluminium conductor of size 6/2.11 or 6/2.59 squirrel weasel and with aluminium binding wire on poles etc traightening / tightening with mechanical devices ,complete all as specified and directed.

Supply and fixed in replacement of galvanised steel wire 4mm dia to earth wire on HT/LT poles for fabrication of cradles hexagonal/rectangular guards out of galvanised steel wire 4mm dia etc complete all as specified and directed.

Supply & replacement of existing unserviceable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of cross sectional area 70 Sqmm 3.5 Core complete all as specified.

Supply & replacement of existing unserviceable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of cross sectional area 50 Sqmm 3.5 Core complete all as specified.

Supply & replacement of existing unserviceable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of cross sectional area 25 Sqmm 3.5 Core complete all as specified.

Supply & replacement of existing unserviceable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of cross sectional area 16 Sqmm 3 Core complete all as specified.

Supply & replacement of existing unserviceable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of cross sectional area 10 Sqmm 2 Core complete all as specified.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable flat or circular stranded conductor size of 10 Sqmm, 2 core complete all as specified.

Supply & replacement of existing unserviceable SVL/HPSV fitting with new new generation energy saving and environmental friendly long life LED street light 30watt made up to pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK07 with 10KV built in surge protection device and making neccessry connection with suitable size of copper wire from fitting to pole box all as directed by Engr-in- Charge.Make: Havells/Wipro/Bajaj

Supply and fix in replacement of 40 watt LED new generation post-top energy saving, environmental friendly long life aesthetically designed with symmetrical light distribution,spun aluminium landscape luminaire with high power LEDs as light source including necessary electric connection complete all as specified and directed by Engr-in-Charge . Make: Havells/crompton/wipro

Supply and fix in replacement of 25 watt LED new generation post-top energy saving, environmental friendly long life aesthetically designed with symmetrical light distribution,spun aluminium landscape luminaire with high power LEDs as light source including necessary electric connection complete all as specified and directed by Engr-in-Charge . Make: Havells/crompton/wipro

Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

S&F in replacement of existing unserviceable MCCB any size & capacity with MCCB 4 pole 160 Amps,Icu 36 KA MCCBs thermal magnetic release, with overload protection & suitable thimbles/extended terminal with nuts,bolts and washers etc including minor required additional/alternation for fixing and connecting up of MCCB all as directed by Engr-in-Charge. Note- Rate of extended terminal deemed to be included in item of rate.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead 32X6mm size by means of nuts bolts,washers,check nuts of galvanised iron and 32mm x 6mm earth lead protected by provision of GI medium grade 40 mm bore including provision off 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 KG/Sqmm) and frame of angle iron 40x40x6 mm with 6mm dia MS bar handle made to shape, GI light grade pipe 20mm dia for watering of suitable length placed on the TOP edge of earth plate,common salt and charcoal filling with fixing arrangement, funel,wire mesh and earth work in any type of soil , returning filling in and removal of surplus soil to a distance not excceding 50 mtr complete plate all as specified and shown in EP-3 of SSR Part-I and connecting to earth test point all as specified or indicated including testing on completion.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4 mm dia by means of nuts bolts,washers,check nuts of galvanised iron earth lead protected by provision of GI medium grade 40 mm bore including provision off 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 KG/Sqmm) and frame of angle iron 40x40x6 mm with 6mm dia MS bar handle made to shape, GI light grade pipe 20mm dia for watering of suitable length placed on the TOP edge of earth plate,common salt and charcoal filling with fixing arrangement, funel,wire mesh and earth work in any type of soil , returning filling in and removal of surplus soil to a distance not excceding 50 mtr complete plate all as specified and shown in EP-3 of SSR Part-I and connecting to earth test point all as specified or indicated including testing on completion.

M&L (in replacement) stay assembly using stay rod of 20 mm dia complete with accessories as shown in EP No.1 of SSR 1991 Part I including galvanized steel stranded wire of size 7/4 mm complete all as specified (loop type insulator, earth work and PCC shall be measured and paid for separately).

M&L (in replacement) of existing unserviceable Loop type insulator porcelain, vitreous white/brown or green, large size with overall dimensions 90x140mm clearance of hole 25.5mm.

Supply and fix (in replacement) lightning arrestor (set of three) expulsion type complete with all fittings transmission class discharge capacity 65 KA suitable for 11000 volts including taking down old arrestors of any type, shape and size and removing from site.

Supply & replacement of existing unserviceable Wood/ PCC/steel tubular pole with new Steel tubular pole complete with cast iron base plate, finial taper plug, bolt, nuts & screws as specified type 410 SP-31 (9 mtr long ) Note: Excavation and PCC shall be measured and paid separately .

Supply & installation in replacement of existing unserviceable busbar box , completely testing and commissioning of factory fabricated prewired bus bar, cubical type of appropriate size of 60cm x 45cm x 30 cm out door dust vermin proof, made out of 40x40x6mm angle iron frame/legs and 3.15 mm thick CRCA sheet with openable shutters on both sides (front & rear), powder coated externally and internally, having locking arrangement mounted on four legs 90cm high (30 cm below ground level and 60 cm above ground level),Panel embedded in PCC (1:2:4 ) type B2 of suitable size with clear working space all around the bus bar complete all as specified & directed by the Engr-in-Charge to accommodate the following accessories :- (a) MCCB 4 Pole 160 A 25KA - 1 No (Make:- Hager) Cat part No.HDA161Z with X160 frame MCCB fixed overload, fixed short circuitbreaking capacity. (b) Copper bus bar 200 A for three phase and neutral duly insulated with sleeves of different colour RYB . (Note : (i) Incoming and outgoing cable shall be fixed with appropriate size of copper thimble. (ii) Apron shall be provided at bottom for protection of cable to avoid entry of vermins, reptiles. (iii) Entries of all sizes of cables in panel should be done through adequate size of metallic cable glands. (iv) Apron shall be provided at bottom for protection of cable to avoid entry of vermins, reptiles. (v) Entries of all sizes of cables in panel should be done through adequate size of metallic cable glands.

Re-stretching of ACSR conductor and earth wire of any size and type on HT poles including disconnecting and rewinding with insulators with suitable size of binding wire after restretching, connecting jumpers adjusting line dividers etc and cutting/trimming of tree branches upto 2 mtr clear distance from wire all as directed by Engr-in-Charge.

S&F in replacement of existing unserviceable MCCB any size & capacity with MCCB 4 pole 100 Amps,Icu 25 KA MCCBs thermal magnetic release, with overload protection & suitable thimbles/extended terminal with nuts,bolts and washers etc including minor required additional/alternation for fixing and connecting up of MCCB all as directed by Engr-in-Charge. Note- Rate of extended terminal deemed to be included in item of rate.

S&F in replacement of existing unserviceable MCCB any size & capacity with MCCB 4 pole 63 Amps,Icu 25 KA MCCBs thermal magnetic release, with overload protection & suitable thimbles/extended terminal with nuts,bolts and washers etc including minor required additional/alternation for fixing and connecting up of MCCB all as directed by Engr-in-Charge. Note- Rate of extended terminal deemed to be included in item of rate.

M & L for cutting of existing road/ floor/ plinth/drain for taking out/laying of UG cable through GI pipe including necessary earth work excavation and making good to match with existing surface complete all as specified with PCC 1:3:6 type C1 by (using 20mm graded stone aggregate) complete all as specified.

Painting to existing steel tubular poles 09m long including cross arms, clamps etc. with two coats of aluminum paint on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with white and black paint alternatively on external surface above PCC copping including preparation of old painted surfaces by scraping complete.

Supply & fixed in repair UG LT PVC insulated armoured heavy duty cable end terminal joints (heat shrinkable) of along Pole etc suitable for aluminium conductor cable and testing after jointing cable of size 25-50 sqmm complete all as directed.

Supply & fixed in repair UG LT PVC insulated armoured heavy duty cable end terminal joints (heat shrinkable) of along Pole etc suitable for aluminium conductor cable and testing after jointing cable of size 70-150 sqmm complete all as directed.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink, Indoor/Outdoor type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm, complete all as specified.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink, Indoor/Outdoor type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 70-150 sqmm, complete all as specified.

M & L for replacement of LT cable route indicator reading "MES LT UG 1100 V cable" and route of cable with arrow, made out of CI in square shape of size 200mm x 200mm x 10mm with 150mm leg, fixed in PCC pre-cast block of 250mm x 250mm x 1000mm

Supply and fixing in replacement LTXL-Ultra heavy duty capacitor cylindrical type rating 10 KVAR 440 Volts with maximum ambient Temperature upto 70ºC including necessary material required at site for connection and as directed.