Military Engineer Services Tender

Demolition of reinforced Cement concrete in any position and any description including cutting of reinforcement bars of facilitate demolition, complete all as specified and directed.

M & L for providing pre-cast Reinforced cement concrete as in landing, cover slab (for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar items woth plain faces in cement concrete 1: 2:4 type B1, using 20 mm graded stone aggregate and setting in cement mortar (1:6) complete all as specified and directed.

M&L RCC Type A-1( 1:1:5:3) using ( 20 mm well graded aggregate) for cover slabs, Slabs supported on walls, beams and columns in floors, roofs, and like complete all as specified and directed.

Demolition of Cement concrete(unreinforced) any description and any position not otherwise specified provided for, complete all as specified and directed.

M&L for pre-cast cement concrete type C-1 (1:3:6) using 20mm graded stone aggregate as in block masonry with solid block, exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M&L for walling of random rubble stone masonry uncourced, well bounded, bedded and solidly hearted built in CM 1:4 complete all as specified and as directed.

All as per item No. 09 above but except stone complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4 using water proofing compound @ 3% by wt of cement for finished even and smooth (without using extra cement) (WPC will be measured and paid separately).

M&L for rendering 15 mm thick in CM (1:4) on external surfaces of brick work, stone masonry or concrete surfaces finished fair and even, complete all as specified and directed.

Supply only water proofing compound(WPC), complete all as specified and directed.

M&L for two coat of cement base paint on walls including preparation of new plastered surfaces, complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8 mm dia bar cut to length bend to shape required incl cranking, bending spirally for hooping for columns, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F in repair PVC (SWR) pipe 110 mm bore type B pipe single socketed, in any length, laid in floors, retaining wall/trenches etc complete all as specified and directed.

S&F in repair PVC (SWR) pipe 110 mm bore type B pipe single socketed, in any length, fixed to walls etc complete all as specified and directed.

S&F in repair PVC (SWR) pipe 75 mm bore type B pipe single socketed, in any length, with rubber rings joints laid in trenches or in floor etc complete all as specified and directed.

S&F in repair PVC (SWR) pipe 75 mm bore type B pipe single socketed, in any length, with rubber rings joints fixed to walls etc complete all as specified and directed.

M&L for 50mm thick cement concrete (1:3:6) type C1 (using 20 mm well graded stone aggregate) as in plinth protection, finishing cement concrete surfaces fair and even without using extra cement, laid in alternate panels, including forming joints at 2 mtr intervals and filled with bitumen mastics, complete all as specified and directed.

Demolition and breaking up drain pipes, 150mm bore (Salt glazed stone ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up drain pipes, 300mm bore (Salt glazed stone ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 using 40mm graged stone agg as in bed to drain pipe, incl packing under and haunching against the sides of pipe 150mm bore, after they are laid and tested complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2 using 40mm graged stone agg as in bed to drain pipe, incl packing under and haunching against the sides of pipe 300mm bore, after they are laid and tested complete all as specified and as directed.

M&L 150mm bore reinforced concrete pipes, class NP2 laid and jointed complete with collars and jointed, complete all as specified and as directed

M&L for 150mm bore salt glazed storewate drain pipes, grade 'A' laid in trenches and jointed and tested, complete all as specified and as directed.

M&L for 300mm internal dia salt glazed storeware drain pipes, grade 'A' laid in trenches and jointed and tested, complete all as specified and as directed.

Removing & cleaning of blockage from WC/EWC trap of any description and any position by removing sand/sludge/silt and other forein material deposited in it (either manually or mechanically) upto first manhole and making the seweage system functional to the entire satisfaction of Engr-in-Charge, complete all as specified and as direceted

Removing & cleaning of blockage from trap of bath rooms/kitchen sink/wash basin/Urinal point and gully traps of any description and any position by removing sand/sludge/silt and other forein material deposited in it (either manually or mechanically) upto first manhole and making the seweage system functional to the entire satisfaction of Engr-in-Charge, complete all as specified and as direceted

M&L for Cleaning of sewage lines of existing sewer line of dia 100mm to 300mm bore, laid at a any depth not exc 3.m deep below ground level by mechanically means, using appropriate technological appliances as required at site, including manholes, inspection chamber, testing after cleaning and getting out sludge and accumulated solids/semi solids from connected manholes/Lines, removing the sludges/spoil min 250 mtrs away from MoD land and refixing the manholes cover, complete all as specified and as directed.

M&L for Dewatering/pumping/bailing out contaminated with waste material sludge from septic tank and soakage well along with inlet outlet chamber of any capacity/depth by vehicle mounted sewage suction machine and disposing same out of cantonment area including taking off manhole covers and putting back the same after cleaning/ removing the liquid waste material of septic tanks and cutting holes through slab/ wall where required for inserting pipe and making good the same with cement mortar to match with existing surfaces to make hygienically fit, writing the date of cleaning of septic tank with black and white paint of size 150 x 200mm and finally spraying unslaked lime (bleaching powder), dry, around and over the septic tank all as directed and to the entire satisfaction of by Engr-in-Charge. Note:- 1. Qty of liquid contents shall be measured for payment under this item. 2. Arrangement of Land for the disposal of waste is complete responsiblity of contractor. 3. Arrangement of suction machine is responsiblity of contractor.

M& L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work: not exceeding 200mm thick (Horizontal or sloping & Flat) rough finished surfaces .

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5m deep for fdn etc for shafts manholes etc not exc 10 Sqm on plan and not exc 1.5min depth and getting out hard/dense soil, complete all as specified and as directed.

Returning filling including spreading levelling watering and well ramming in layer not exc 25cm thick each layer, as in soil complete all as specified and as directed. .

M&L for removing surplus excavated material(soil) to distance not exc 150m and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified and directed.

M&L for Hardcore of borken stone of gauge n exc 63mm deposited, spread and levelled in layers n exc 15cm thick each layer watered and rammed to a ture surface, complete all as specified and directed.

M&L for chequrred cement concrete tile 25cmx25cm/20cmx20cmx22 to 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Supply and fix, Vitreous China wash down water closet EWC (pedestal pattern), standard size, white (including fixing bolts flushing cistern and flush pipe) including plastic seat and cover white, closed pattern with flat bottom mild steel chromium plated or anodised hinging devices, connected to drains outlet including chromium plated steel jet pressure unit, fixed as in repairs and removal of old from site, complete all as specified and as directed.

Supply and fixing in repair of existing water closet(squatt pattern) and foot rest with vitreous china(white) first quality water closet, Orissa pattern size 580x440mm with intergal foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet, complete including fixing of flush pipe with seat and making good to disturbed floor surfaces to match with existing and making connectons servicable complete all as specified and directed.

Schedule of Credit