Military Engineer Services Tender

Almirah Medium Steel with Shelves/ H/H x H/Sh (FD-1032 & 1034 Taking out old unsv the following components of Almirah Medium Steel and S & F new components in replacement as per shape and size of original, complete all as specified and as shown on drawing or as directed by Engr-in-Charge.

CI/Brass locks 2/4 holes with duplicate keys complete all as specified and directed by Engr-in-charge.

New steel Handle chromium plated 150 mm complete all as specified and directed by Engr-in-charge. ,

Charpoy GI Pipe with Plywood top (FD-220) Taking out old unsv the following components of Charpoy GI Pipe with ply top and S & F new components in replacement as per shape and size of original, complete all as specified or as directed by Engr-in-Charge.

Supply and fixing with 12mm thick 7 ply grade BWR Type BB commercial face plywood having size 6.5' x 3' fixed with nuts & bolts alongwith washer of size 4mm dia , 65 mm length nuts & bolts and washer incl making /drilling holes in the frame of GI Pipe , 3 each on long rail and 2 each on short rail of each charpoy complete all as specified or as directed by Engr-in-Charge.

Table 900 x 600 x 760mm with & w/o drawers wooden (FD- 223 FD - 224) Renewal of following old unserviceable parts of Table Centre by replacing the same with new all as per drawings or sample kept in AGE (I) office and making item serviceable:-

New Top of size 900 x 600 mm made out of 18/19 mm thick Prelaminated particle board both side teak face and providing teakwood beading 4 mm thick all around the top complete all as specified or as directed by Engr-in-Charge..

S&F PVC hard buffers to the legs of table to make its balance complete all as specified and directed by Engr-in -Charge.

Bed Plywood Top (FD-246) Taking out old unsv the following components of Bed plywood Top S & F new components made out of well seasoned 2nd class hard wood in replacement as per shape and size of original, complete all as specified and as shown on drawing or as directed by Engr-in-Charge :-

New top of 12 mm thick plywood commercial BWR gde of Size 6' x 3' x 12 mm complete all as specified and as shown on drawing or as directed by Engr-in-Charge.

Chair Easy (FD- 229 & FD - 1108) Taking out Existing unsv the following components of Chair Easy and S & F New Components as per Shape and size of original components made out of well seasoned 2nd class hard wood complete all as specified and shown on drawing or as directed by Engr-in-Charge.

M & L for cutting of unsv Plastic Cane and re-canning of Chair easy with half round polythene cane 2mm wide 0.3mm thick for seat and back and border with 2.5mm wide 0.4mm thick finished smooth glossy and edges free from sharp cut complete all as specified and as shown on drawing or as directed/approved by Engr-in-Charge.

S & F PVC hard buffers to the legs of Chair to make its balance complete all as specified and directed by Engr-in -Charge.

Chair Dining (FD-279) Taking out Existing unsv the following components of Dining Chair and S & F New Components made out of well seasoned 2nd class hard wood as per Shape and size as specified and shown on drawing or as directed by Engr-in-Charge.

M & L for cutting of unsv Plastic Cane and re-canning of Dining Chair with half round polythene cane 2mm wide 0.4mm thick (Make : Shah Brand, Premier or Garware) for seat and back and border with 2.5mm wide 0.4mm thick finished smooth glossy and edges free from sharp cut complete all as specified and as shown on drawing or as directed/approved by Engr-in-Charge.

S&F PVC hard buffers to the legs of Chair to make its balance complete all as specified and directed by Engr-in -Charge.

Chair Writing (FD-280) Taking out Existing unsv the following components of Chair Writing and S & F New Components made out of well seasoned 2nd class hard wood as per Shape and size of original components made out of well seasoned 2nd class hard wood complete all as specified and shown on drawing or as directed by Engr-in-Charge.

M & L for cutting of unsv Plastic Cane and re-canning of Chair easy with half round polythene cane 2mm wide 0.4mm thick for seat and back and border with 2.5mm wide 0.5mm thick finished smooth glossy and edges free from sharp cut complete all as specified and as shown on drawing or as directed/approved by Engr-in-Charge.

S&F PVC hard buffers to the legs of Chair to make its balance complete all as specified and directed by Engr-in -Charge.

Table Office Clerk Steel (FD- 1004 ) Taking out Existing unsv the following components of table office clerk steel and S & F new Componentsin replacement as per Shape and size of original components all as specified and shown on drawing or as directed by Engr-in-Charge.

New top of size 1200 x 600 x 750 mm made out of 18/19 mm thick prelaminted particle board teak face and providing teak wood beading 4 mm thick all around the top duly french polished as directed by Engr-in-Charge.

Removing old/unsv shoes from table office clerk and S & F new hard rubber shoes to table as directed by Engr-in-Charge.

Table 3' x 2' Steel with/w/o drawer (FD-1008) Taking out Existing unsv the following components of table 3' x 2' with drawers and S & F new Components in replacement as per Shape and size of original components all as specified and shown on drawing or as directed by Engr-in-Charge.

Dismentling of UNSV table top and providing new top of size 900 x 600 mm made out of 18/19 mm thick prelaminted particle board teak face and providing teak wood beading 4 mm thick all around the top duly french polished as directed by Engr-in-Charge.

Removing old/unsv shoes from table 3' x 2' steel with drawers and S & F new hard rubber shoes to table as directed by Engr-in-Charge.

Chair Varandha with Plastic cane (FD- 359) Taking out existing unsv the following components of chair varandha and S & F new Components in replacement as per Shape and size of original components all as specified and shown on drawing or as directed by Engr-in-Charge.

Weaving of chair varandha with 4 mm wide and 0.5 mm thick cane plastic best quality white colour as specified and shown in drawing or as directed by Engr-in-Charge.

Hard PVC Shoes to chair varandha after removing of old unsv shoes and as directed by Engr-in-Charge.

Sofa Set Five/Four Seater, FD-258) Taking out existing unsv the following components of Sofa Set Five Seater/Four Seater and S & F new Components made out of well seasoned 2nd class hard wood in replacement as per Shape and size of original components all as specified and shown on drawing or as directed by Engr-in-Charge.

Taking out old/existing unsv foam cushion with cover and S & F new cool foam cushion 32 density of of size 550 x 530 x 100 mm with markin cloth, under the superior quality tapestry cloth cover duly stiched & making good shape (Tapestry cloth not less than Rs 220/- per meter) as approved and specified and shown on drawing or as directed by Engr-in-Charge.

Table Dining 4 Pers (FD-283 & FD/E6/MAP-II/03) Taking out existing unsv the following components of Table Dining 4 Pers and S & F new Components made out of well seasoned 2nd class hard wood in replacement as per Shape and size of original components all as specified and shown on drawing or as directed by Engr-in-Charge.

New top of size 1200 x 900 mm made out of 18/19 mm thick prelaminted particle board teak face and providing teak wood beading 4 mm thick all around the top complete all as specified and directed by Engr-in-charge.

S & F PVC hard buffers to the legs of table dining to make its balance complete all as specified and directed by Engr-in -Charge.

Table Dining 6 Pers (FD-273) Taking out existing unsv the following components of Table Dining 6 Pers and S & F new Components made out of well seasoned 2nd class hard wood in replacement as per Shape and size of original components all as specified and shown on drawing or as directed by Engr-in-Charge.

New top of size 1500 x 900 mm made out of 18/19 mm thick prelaminted particle board teak face and providing teak wood beading 4 mm thick all around the top.complete all as specified and directed by Enge-in-charge.

S&F PVC hard buffers to the legs of Table dining to make its balance complete all as specified and directed by Engr-in -Charge.

Table Centre (FD-274 & FD-375) Taking out existing old unsv the following components of Table centre and S & F new Components made out of well seasoned 2nd class hard wood in replacement as per Shape and size of original components all as specified and shown on drawing or as directed by Engr-in-Charge.

New top of size 900 x 450 mm made out of 18/19 mm thick prelaminted particle board teak face and providing teak wood beading 4 mm thick all around the top duly french polished. complete all as specified and directed by Enge-in-charge.

S&F PVC hard buffers to the legs of Table Centre to make its balance complete all as specified and directed by Engr-in -Charge.

Teapoy Wooden (FD-382 & FD-278) :- Taking out existing old unsv the following components of Teapoy wooden and S & F new Components made out of well seasoned 2nd class hard wood in replacement as per Shape and size of original components all as specified and shown on drawing or as directed by Engr-in-Charge.

New top of size 600 x 450 mm made out of 18/19 mm thick prelaminted particle board teak face and providing teak wood beading 4 mm thick all around the top complete all as specified and directed by Engr-in-Charge.

S&F PVC hard buffers to the legs of Teapoy Wooden to make its balance complete all as specified and directed by Engr-in -Charge.

Teapoy Varandha (FD-255 & FD-384) Taking out existing old unsv the following components of Teapoy varandha and S & F new Components in replacement as per Shape and size of original components all as specified and shown on drawing or as directed by Engr-in-Charge.

New top of size 900 x 450 mm made out of 18/19 mm thick prelaminted particle board teak face and providing teak wood beading 4 mm thick all around the top complete all as specified and directed by Engr-in-Charge.

Bottom legs shall be provided hard rubber shoes to make its balance complete. specified and as directed by Engr-in-Charge.

Peg Table (FD-277 & FD-384) Taking out existing old unsv the following components of Peg Table and S & F new Components made out of well seasoned 2nd class hard wood in replacement as per Shape and size of original components all as specified and shown on drawing or as directed by Engr-in-Charge.

New top of size 450 x 300 mm made out of 18/19 mm thick prelaminted particle board teak face and providing teak wood beading 4 mm thick all around the top. complete all as specified and directed by Engr-in-Charge.

S&F PVC hard buffers to the legs of Table Peg to make its balance complete all as specified and directed by Engr-in -Charge.

Table Dining ORs (FD-1007) Taking out existing old unsv the following components of Table Dining OR and S & F new Components in replacement as per Shape and size of original components all as specified and shown on drawing or as directed by Engr-in-Charge.

New top of size 6' x 2' made out of 18/19 mm thick prelaminted particle board teak face and providing teak wood beading 4 mm thick all around the top. complete all as specified and directed by Engr-in-Charge.

Table Office Officer Steel FD-1003) Taking out Existing unsv the following components of table office officer steel and S & F new Components in replacement as per Shape and size of original components all as specified and shown on drawing or as directed by Engr-in-Charge.

New top of size 1370 x 760 mm made out of 18/19 mm thick prelaminted particle board teak face and providing teak wood beading 4 mm thick all around the top. complete all as specified and directed by Engr-in-Charge.

Removing old/unsv shoes from table office officer steel and S & F new hard rubber shoes to table. complete all as specified and directed by Engr-in-Charge.

Charpoy IP Hard Top ( FD/MAP-II/01) -: Overall size shall be 1980mm long, 900mm wide and 440mm high.Two long rails and two short rails shall be of 25mmx65mmx16 guage MS rectangular pipe .The legs shall be of size 32mmx32mmx16 guage welded to long and short rails as shown on drg.Two stiffeners of size 25mmx25mmx16 guage shall be provided in equidistant between two opposite long rails. Six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. Two stiffeners joining legs of size 25mmx25mmx16 guage shall be provided at 150mm from ground level .12mm thick commercial plywood shall be provided for top as shown on drg with proper nut and bolt .PVC hard rubber shoes shall be fixed at bottom of each legs.All steel surfaces shall be Pre treated with epoxy powder caoted oven baked with black colour complete all as specified and directed by Engr-in-Charge.

Chair dining long back FD-357 -:Overall size shall be 450mm wide at bottom of legs level and 455mm deep and 1200mm high. All wood shall be of first class hard wood teak (MP). Front two legs shall be of 25mmx50mm in section and 450mm high. The rear legs shall be out of 65mmx50mm made to shape as shown on drawing. The front and rear legs at seat level shall be joined by 40mmx20mm in section side rails provided joining front and rear legs. The bottom of side stiffeners shall be 100mm above the bottom of legs. A middle stiffener of 25mmx40mm in section joining the side stiffeners in the middle shall be provided as shown on drawing. For seat cushion, a frame shall be made with 75mmx20mm in section front and rear wooden horizontal rails joined by 40mmx20mm in section wooden side rails. 70mmx10mm batten shall be provided in the middle. 45mmx10mm batten shall be provided with three equal gaps as shown on drawing. 50mm thick, 32 density foam shall be provided to the chair which shall be covered with leatherised Rexene of best quality as approved by GE. At the back rest the shape of legs shall be as shown on drawing. Rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical (two in numbers) and 12mm dia teak wood in horizontal (four in numbers). Back shall have vertical battens 20mmx25mm in section. 50mm thick synthetic foam of 32 densitcovered with laeatherised rexene made to shape as shown on drawing shall be fixed over 10mm thick plywood commercial. all wood surfaces exposed, to view when placed in position shall be French polished with lacquer finish as directed by Engineer-in-charge.

Sofa set 4 seater (FD-1113)-: Overall size of three seat piece shall be 1730mm long 745mm wide and 530mm high up to arm rest level. Overall size of one piece shall be 670mm long, 745mm wide and 530mm high up to arm rest level. The sofa set to seat five shall consist of one large three seat piece and two small one seat pieces. All wood shall be of first class teak wood (MP). Legs of sofa set shall be 70mmx35mm in section teak wood. Front legs shall be joined by 100mmx35mm in section wooden rail in front. Front and rear legs shall be joined with 100mmx35mm in section wooden rails in sides. Three wooden bearers of 40mmx40mm in section shall be provided below the seat to support the wooden battens of 50mmx20mm in section. 21numbers wooden battens shall be provided for the seat of large three seat set and 7 numbers wooden baattens shall be provided for the seat of large three seat set and 7 numbers wooden batten shall be provided for the seat of large three seat set and 7 numbers wooden batten shall be provided to the seat of one seat set. Arm rests shall be made to shape out of 70mmx35mm in section wooden horizontal at bottom and top and vertical sides 70mmx35mm in section wooden horizontal at bottom and top and vertical sides slanting as 560mm. 14 Numbers battens of teak woos dhall be provided for the long seat and four numbers of battens shall be provided for one seat in the wooden frame of back rest. 30mmx50mm in section wooden rail to support back frame shall be provided joining the rear legs. 100mm thick seat cushions and back cushions shall be of size 530mmx560mm ( three numbers in seat and three number in the back for the large seat). In one seat sofa chair the cushion shall be one in back and one in seat of size 530mmx560mm. The cushion shall be of cool foam or any other superior quality foam of 32 or 48 density as approved by Engineer-in-charge. Cushions shall be covered with tapestry cloth of not less than 400/- per metre or as directed by Engineer-in-charge. All wood surfaces exposed to view when placed in position shall be French polished with lacquer finish complete all as specified and directed by Engr-in-Charge.

Locker bed side steel (FD-1029)-: Overall size shall be 760mm long, 600mm wide and 1100mm high.The locker shall be made of mild steel sheet 1mm thick.20 mm dia conduit pipe shall be chrome plated with wall thickness of 1.6 mm shall be fixed with side sockets.Two handles chromium plated 100mm long shall be fixed to shutters with necessary riveting . One hasp and staple 75mm long shall also be fixed to shutters with riveting.The left shutters shall be provided with 100mm long tower bolt inside at upper and lower ends also.The locker shall be provided with compartments as shown in drgs made of 1mm MS sheet. All steel surface internally and externally, exposed to view when placed in position shall be given two coats of green hammer paint internally and externally after properly smoothened the surface with sand paper and applying putty.A Mark of MES shall also be provided at top left corner of front shutter of visible colour. Painting shall be done with spray machine. Rest all specifications are as per drg .

Almirah Med with Shelve steel (FD-1032) -: Overall size shall be 1270mm high,765mm wide and 440mm deep.The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width of 440mm of almirah. Top, sides, back, bottom and front of almirah shall be of 1mm thick mild steel sheet. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet.Front shutters shall have two leaves.All joints and welding, fixing shall be done according standard workmanship.A steel chromium plated handle 100mm long shall be provided to the shutter.The locking device shall be three way locking device and shall also be provided with decorative key plate .Make of Lock-Harrison/Godrej.All steel surfaces exposed to view when placed in position shall be painted with two coats of silver hammer paint over a coat of primer with spray machine after preparation of surfaces. A mark of MES shall also be provided on left top corner of front shutter of visible colour as directed by Engr-In -Charge. Rest all as per drgs

Almirah Large with Shelve steel (FD-1031) -: Overall size shall be 1985mm high,920mm wide and 485mm deep. The base shall be made of two numbers mild steel sheet channel bases made in U shaped with ends covered . Mild steel sheet shall be 1mm thick. The base channel shall be welded at 50mm from each end of the length of 920mm and shall be up to full width of 485mm and shall be 100mm high Top, sides bottom and back of almirah shall be of 1mm thick mild steel sheet . Four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments.Front shutter shall two leaves of equal size .Front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung. All joints and welding and fixing shall be done in accordance with the standard workmanship.One chromium plated steel handle with a locking device shall be provided as shown on drawing . The locking device shall be three way locking device and shall also be provided with decorative key plate .Make of Lock-Harrison/Godrej.All steel surfaces exposed to view when placed in position shall be painted with two coats of silver grey hammer paint internally and extrenally with spray machine after preparation of surfaces.A mark of MES shall also be provided on top left corner of front shutter with visible colour. Painting shall be done with spray machine.Rest all as per drg.

Table bed side (FD/E6/MAP/15 (R) -: The overall size of the table bed side shall be 450mm x 450mm x 600mm from rear and 450mm x 450mm x 500mm from front as shown in drg.The entire frame of table bed side shall be made up of 18mm MS square pipe (18 Gauge) duly black powder coated. The two sides and top shall be made up of 18mm thick plywood exterior grade and pasted with 1mm thick platic laminated sheet . The Back of the table except the top portion as shown in drg shall be provided with 6mm commercial plywood BWR grade duly screwed to frame. The two sides, back and bottom of drawers of the table shall be made up of 12mm thick commercial plywood irrespective of what is shown on drg, except the front side which shall be of 18mm thick prelaminated particle board exterior grade. The drawers shall be made functional on teak wood runners fixed inside the tables shown on drg.The drawers of the tables shall be provided with 100mm long CP handles .Rest all as per drg.

Sofa chairs single seater (FD-373)-: Overall size of one Seat shall be 670mm long and 745 mm wide and 530mm high up to arm rest level.The sofa set single seater shall consist of one single seats. All wood shall be of first class teak wood (MP).Legs of sofa set shall be 70mm x35mm in section teak wood . Front legs shall be jointed by 100mm x 35mm in section wooden rail in front . Front and rear legs shall be joined with 100mm x 35mm in section wooden rails in sides. 100mm thick seat cushion and back cushions shall be of size 530mm x 560mm (one numbers in seat and one numbers in the back). The cushion shall be of cool foam or any other superior quality foam of 40 density as approved by Engineer-in-charge. Cushion shall be covered with approved color tapestry cloth (approved by GE , not less than Rs:300/meter)or as directed by Engineer-in-charge.All wood surface exposed to view when placed in position shall be French polished with lacquer finish rest.Rest all as per drg.

Box Kit steel (FD-98) -: Overall size shall be 760mm ling, 455mm wide and 312mm high. Box shall be made of 1mm thick plain black iron sheet. Bottom of box shall rest on 1.6mm plain black iron sheet channel whose ends are covered. Four vertical angle iron 19mmx19mmx1.6mm up right shall be provided at four corners of box with welted joints. When lid is open, the box sheet shall bulge out, at 25mm from top of box, with 6mm radius in semi circle all around the box for resting of the lid on it. Top of box, when lid is open, black iron sheet shall be curved round over 3mm dia wire alround the box. Lid of box shall be of 1mm thick sheet. Two numbers 40mm wide 1mm thick PBI sheet stiffeners shall be provided at 230mm apart in the middle and equi-distant from sides. 1.6mm thick PBI sheet made to shape as shown on drawing shall be provided on outer front portion of box for lifting. 40mmx3mm mild steel flat iron hasp and staple shall be provided as shown on drawing. 19mmx50mm sheet of iron 1.6mm thick shall be provided as stays to both sides of lid and the box. All steel and iron surfaces shall be painted with two coats of enamel black paint over a coat of primer after preparation of surfaces as directed by AGE (I) .

Form with back (FD-78) -: Overall size shall be 760mm ling, 455mm wide and 312mm high. Box shall be made of 1mm thick plain black iron sheet. Bottom of box shall rest on 1.6mm plain black iron sheet channel whose ends are covered. Four vertical angle iron 19mmx19mmx1.6mm up right shall be provided at four corners of box with welted joints. When lid is open, the box sheet shall bulge out, at 25mm from top of box, with 6mm radius in semi circle all around the box for resting of the lid on it. Top of box, when lid is open, black iron sheet shall be curved round over 3mm dia wire alround the box. Lid of box shall be of 1mm thick sheet. Two numbers 40mm wide 1mm thick PBI sheet stiffeners shall be provided at 230mm apart in the middle and equi-distant from sides. 1.6mm thick PBI sheet made to shape as shown on drawing shall be provided on outer front portion of box for lifting. 40mmx3mm mild steel flat iron hasp and staple shall be provided as shown on drawing. 19mmx50mm sheet of iron 1.6mm thick shall be provided as stays to both sides of lid and the box. All steel and iron surfaces shall be painted with two coats of enamel black paint over a coat of primer after preparation of surfaces as directed by AGE (I) .

Bed plywood top (FD-1102) -: Overall size shall be 1980mm long, 980mm wide and 660mm high. Long sides shall be of 12mm thick Pre-laminated Particle Board (PPB) made to shape as shown on drawing. Short sides shall be of 12mm thick PPB joined with long sides. Wooden teak wood frame of 35mmx90mm shall bwe provided with long sides and short sides. Long sides shall be 1900mm long and short sides shall be 876mm long joined togeher to form the frame. Two equally spaced stiffeners shall be provided in the middle joining the long sides of the wooden frame. 12mm thick PPB shall be provided on long sides projecting 40mm over the top hard bed and shall be 369mm igh overall. 4mm thick mild steel brackets 100mm long made to shape as directed by Engineer-in-charge shall be provided at the junction of wooden and PPB in long and short sides. Foot board shall be 900mmx179mm and 25mm thick PPB. Head board shall be 900mmx374mm and 25mm thick PPB. Head board and foot board shall be provided with 40mmx40mm teak wood beading made the shape as shown on drawing. 25mm thick particle board commercial shall be provided over the wooden frame as hard bed top 100mm thick matterss of high density and of best quality (Sleepwell) covered with tapestry cloth of best qquality or obtained as ready made from market as approved by Engineer-in-charge. All teak wood surfaces exposed to view shall be French polished with lacquer finish.