Military Engineer Services Tender

Description same all as per item No. 2.00 but for One bell point controlled by one 5 Amps switch on Same board, complete all as specified and as directed .

Description same all as per item No. 2.00 but for One light point controlled by two way switch, complete all as specified and as directed .

Description same all as per item No. 2.00 but for One 3 pin, 5 Amps, socket outlet controlled by one switch on independent board, complete all as specified and as directed .

Description same all as per item No. 2.00 but for One 3 pin 5 Amps socket outlet controlled by one switch on Same board, complete all as specified and as directed .

Description same all as per srl item No 2.00 here-in-before but for one socket outlet 15 Amp with 2.50 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.50 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly on independent board complete all as specified and as directed .

Description same all as per srl item No 2.00 here-in-before but for one socket outlet 15 Amp with 4.00 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 4.00 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly on independent board complete all as specified and as directed .

Supply and fixing switch piano 5/6 Amps, flush button type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and as directed .

Supply and fixing switch piano 15/16 Amps flush botton type one way 230 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and as directed .

Supply and fixing switch piano 5/6 Amps, flush button type, single pole, two way, 230 volt , AC supply, ISI Marked, complete all as specified and as directed .

Supply and fixing bell push flush type , 5 Amps one way , 230 volts complete all as specified and as directed .

Supply and fixing socket outlet 2 in 1, 5 pin 6 Amp and multi pin flush type, 230 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and as directed .

Supply and fixing Socket outlet, 2 in 1, flush type 6/16 Amps 3/3 pin universal multipurpose, 230 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and as directed .

Supply and fixing Fan regulator electronic, step & socket type 230 volts , 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified and as directed.

Supply and fixing in repairs door Bell electric ,buzzer type, AC, SP , 230V, ISI Marked complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Ceiling rose surface bakelite 65x50mm three terminals including provn of PVC blocks, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs lamp holder, PVC/polycarbonate insulated body with back plate suitable for batten fittings, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs LED bulb 9watt capacity isolate body complete all as specified and directed.

Supply and fixing in repairs LED 22 watt integrated batten with inbuilt lithium ion battery with minimum 4 hour back up including removing of unserviceable light fitting complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs LED tube light fitting of 10 watts 6000K , 230 volt, with basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete with all fixing accessories and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed .

Supply and fix in repair 34 watt LED Light 2' x 2' LED luminare with Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling. ceiling with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed .

Supply and fix in repair 15 watt LED Light Track mounted LED light with modern design, compact size with High power COB LED to provide focussed light. Track light is a method of lighting where light fixtures are attached anywhere on a continuous track rail which is electrically charged as compared to the need of routing electrical wiring to individual light position. with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed .

Supply and fix in repair 25 watt LED Light New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed .

Supply and fix in repair security light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 32mm X 5 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed.

Supply and fix in repairs for sub main wiring with two run of 4 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 4 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuity conductor connected to common earth dolly including concealed on wall/ceiling surfaces in PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length.

Supply and fix in repairs for sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuity conductor connected to common earth dolly including concealed on wall/ceiling surfaces in PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length.

Supply and fix in repairs for sub main wiring with four run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuity conductor connected to common earth dolly including concealed on wall/ceiling surfaces in PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Five runs of cable and one run of PVC conduit shall be measured and paid as one unit length.

Supply and fixing in repairs sheet metal enclosure, (ISI marked), triple pole & neutral (TPN), horizontal type suitable for fixing MCB, 415 volts, 4 way with 200 Amp rated copper bus bar, IP - 43 protection, flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection, necessary PCC work and making good the disturbed surfaces of walls, etc to match the existing surface complete all as specified and as directed .

Supply and fixing in repairs sheet metal MCB distribution board (ISI marked) for 240 volts, SPN 4 way, horizontal type with 200 Amps rated copper bus bar, double door IP-43 flush /surface mounting or on wooden board, in and including copper lugs/thimbles duly crimped for connection, and making good the disturbed surfaces of walls, etc to match the existing surface complete all as specified and as directed .

Supply and fixing in repairs sheet metal MCB distribution board (ISI marked) for 240 volts, SPN 8 way, horizontal type with 200 Amps rated copper bus bar, double door IP-43 flush /surface mounting or on wooden board, in and including copper lugs/thimbles duly crimped for connection, and making good the disturbed surfaces of walls, etc to match the existing surface complete all as specified and as directed .

Supply and fixing in repairs sheet metal MCB distribution board (ISI marked) for 240 volts, SPN 12 way, horizontal type with 200 Amps rated copper bus bar, double door IP-43 flush /surface mounting or on wooden board, in and including copper lugs/thimbles duly crimped for connection, and making good the disturbed surfaces of walls, etc to match the existing surface complete all as specified and as directed .

Supply and fixing in repairs MCB, Single Pole, AC supply, 240 volts 'C' series, 06 to 32 Amps, 10kA and making connections complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs MCB, Single Pole and Neutral , AC supply, 240 volts 'C' series, 32 Amps, 10kA and making connections complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs MCB, Single Pole and neutral , AC supply, 240 volts 'C' series, 40 to 63 Amps, 10kA and making connections complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs MCB, Tripple pole and neutral , AC supply, 240 volts 'C' series, 40 to 63 Amps, 10kA and making connections complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Isolator 4 Pole 'C' series 100 amps capacity, AC supply, 415 V, 10kA complete all as specified and as directed by the Engineer-in-Charge.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to earthing test point as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c both ways with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing as in repair complete all as specified and as directed by the Engineer-in-Charge and earth testing on completion .

Taking down exhaust fan of any size for painting of exhaust fan complete at site with synthetic enamel paint by spraying incl (fittings with filler) one coat after cleaning all dust etc including connecting up. Provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire incl replacement of capacitor, bearing/bush, rubber bushes minor nuts bolts screws washers greassing in fan bearing & refix same complete all as specified and as directed

Material and labour for rewinding of 300mm sweep Exhaust fan with appropriate size of copper enamelled wire including varnishing ,heating with proper insulation complete and testing all as specified and directed.

Taking down ceiling fan of any size and replacement of fan controller as per existing model and make and cleaning of all dust etc incl connecting up and provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire incl bearing/bush, minor nuts bolts screws washers & refix same all as specified and directed.

Material and labour for cutting of existing suction pipe MS/DI pipe of size 150mm dia & insertion of Tee & making branch connection of size (150x150x80)mm for taking suction pipe of new pump including all necessary fittings Tee (150x150x80) Flange heavy duty with nut bolts washer & rubber/fiber gasket of 3mm thickness all as specified and directed .

Material and labour for MS ERW steel flanged pipe of size 80mm dia for suction and delivery pipe of new pumps including all necessary fittings such as Tee, Bend, Nipple, heavy duty flanged etc including nut bolt washer, rubber/fiber gasket of 3mm thickness all as specified & directed

Supply & fixing of CI sluice valve heavy duty for 80 mm bore pipe with flanged ends PN-1.6 ISI marked including joints and jointing materials such as nuts, bolts, washers & rubber/fiber, gaske complete all as specified & directed .

Supply & fixing of Non Return Valve heavy duty of size 80 mm bore with flanged ends PN-1.6 ISI marked including joints and jointing materials such as nuts, bolts and washers and rubber/fiber, gaskets complete all as specified & directed .

Supply, installed, tesing and commissioning Multistage booster pump type suitable for discharge 20 cubic meter / hours at 70 meter head and lifting & boosting of treated water for nominal speed 1450 RPM (with casing made of CI/CF8 (SS304), shaft sleeves & shaft made of SS 410,soft gland packing, directly coupled with 12.5HP, 415 Volts 50 Hz AC nominal speed-1450 RPM electric driven Motor,TEFC, Non FLP, 50 Hz + 5%, 415 V + 10%, confirming to IE3, BEE Star rated as per IS-12615 : 2018 confirming to IP - 55 degree of protection , F class insulation.Both pump and motor, mounted on and including a common mild steel base frame. It shall be placed on PCC / RCC foundation as specified by OEM including form work etc complete all as per manufacturer's instructions.( Note:- Rate of foundation, Base frame and fitting charge of suction/delivery pipe upto common header required length and diameter include reducers of required size and dia connecting and making a common header of both pumps included in the quoted rate) Note: 1. Suction and delivery as per specification of pump required legnth with fittings will be paid in respective items. 2. Capacity of primover Motor 12.5HP, 415 Volts 50 Hz AC,1450 RPM 3. Place of installation- As directed By Engr-in-Charge. 4. Rate shall deemed to be included for following:- (a) Commissioning of complete pump set shall be done in presence of maufacturer's Engineer and not by any authorized dealer/workshop/ rep concern etc. (b) Pressure gauge, water flow meter water inlet system for priming of pump all as specified as per specification of pumps.

Supply and fixing Design, fabricate, supply, testing and commisioning of factory made motor starter Electric Panel Board double door, out door type fabricated out of 2.00mm thick CRCA sheet steel for outer body and 2.00mm thick CRCA Sheet for inner partition walls, independent cabinate with cabinate doors for Change Over Switch, MCCBs, Bus Bars, cable Alley, metering equipment, vertical type floor mounted on angle iron frame of ISA 50x50x5mm with minimum height of legs 60cm, minimum IP-54 protection, comprising of solid copper bus bar 4 strips suitable of 250Amps, embeded to PCC complete with internal wiring, epoxy powder coated and connection of cable ends with suitable size of aluminium cable lugs with the following accessories :- (a) INCOMING :- (i) MCCB 100 Amps, 4 Pole, 415 Volt, 25 KA - 01 No OUTGOING :-(i) MCCB 63 Amps, 3 Pole, 415 Volt, 25 KA - 02 No (ii) MCB 32 Amps, 2 Pole, 240 Volt, 16 KA - 01 No (iii) Digital volt meter - 01 No (iv) Digital ammeter -01 No (v) Selector Switch for Amp/Volt Meter - 02 Nos (vi) Current Transfer (CT) of suitable ratio - 03 Nos (vii) Phase indicator lamp (RYB) set of three - 01 Set (viii) Protection for phase sequance-01 No (ix) Single phase preventor- 01 No (x) Star delta starter suitable for 12.5HP/10KW motor- 02 Nos. Note :- Contractor should got approved the drawing of panel board from GE before fabrication of LT Panel.

Supply and fixing of LT Copper conductor cable, multi stranded, 3 core 16 Sqmm all as specified and directed .

Supply & laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire of size 4 mm dia or tape and overall PVC sheathed 35 Sqmm nominal cross section,3.5core ,stranded conductor , in service connections complete all as specified and as directed.

Material and earthing for Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron earth strip 32x6mm up to test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI earth wire protection pipe 50mm bore up to main board complete as shown in electrical plate no 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing Old unserviceable earthing complete all as specified and testing on completion complete all as specified and directed by Engr-in-charge. Note : The units rate includes the cost of excavation & earth work in any type of soil charcoal & salt in altemate layers, 25mm GI Pipe (light grade) for watering 50mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

Supply & fixing of fully automatic Sodium Hypo chlorite dosing equipment with following accessories with specification including piping & wiring all as specified & directed by Engr-in-charge. a) Dosing pump having maximum flow rate 6L PH @ 4 Bar ,230 V,50 Hz AC Single phase, dosing rate adjusment manually,level switch interlock inbuilt on the pump, Diaphragm Electronic type 02 Nos one working & 01 standby. b) Dosing mixing tank cylindrical flat bottom LDPE storage capacity 100 ltrs. c) Dosing Tank mixer - mixing Motor made out of SS-304 with 0.25 HP single phase motor type Inline Helical/worn type. d) Skid MSEP - Made oput of MS duly powder coated Entire Plant ON - 01 Nos e) Control Panel - As Per VP Design - 01 Nos f) Pressure Switch - Made out of CI/ SS Automatic ON/OFF Operation type LPS/HPS - 01 Nos

Supply only swimming pool SPA Water Chemical Test Kit for chlorine and PH test. Make - WWD Pool & other reputed branded Make as Approved by GE.

Supply only water quality Test Kit for Bromine,Chlorine and PH level for daily testing of quality of Water at various supply point of Subathu.

Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out Hard dense soil all as specified and directed by Engr-in-Charge.

Material and labour for fixing of heavy duty rotational moulded polythene water storage cylindrical vertical with closed top hoisted & fixed in position of capacity 10,000 ltrs including making inlet & outlet air vent pipe, over flow pipe etc all as specified & directed by Engr-in-Charge.

Material & Labour for cutting of existing supply main of size 80mm dia GI Pipe near Rcc water storage tank at KVR & insertion of new Tee(80x80x80) and making branch connection of size 80mm dia including all necessary fittings Tee (80x80x80)mm , flange heavy duty with nut bolt washer & rubber/fiber gasket of 3mm thickness all as specified & directed by Engineer-in-charge.

Supply and fixing of GI pipe medium grade 40mm dia for making hadder from 80mm to all 4 Nos of Sintax tank & wash out all as specified and directed by Engr-in-Charge.

Supply and fixing of 40mm dia gun metal gate valve with iron wheel head screwed both ends for iron pipes and fixed complete in all as specified and directed by Engr-in-charge.

Material and labour for fixing of welded steel wire fabric parallelogram wire mesh not more than 20mm each length & opposite side of angle should be of equal weight not exceeding 4 kg Per square meter & dia of wire not less than 2.70 mm all as specified and directed by Engr-in-charge. Note: i) MS (50x50x5.0) mm should used for Vertical post of all four corners & horizontal laying top of RCC Plinth of water tank. ii) Intermediate support & horizontalally MS angle 40x40x5.0 & FI strips 40mm & 5mm thick side of monkey cage should be used.

Material and labour for fabrication & execution of Rolled mild steel Joint, channel,angle or tee section's fixed independentaly without connecting plates etc (cut to ordinary length ie within 20mm of the length indicated or fixing) welding of welded steel wire fabric including one coat of zinc coating as primer for making caging of PVC water storage tank (10,000x4) ltrs of KVR 14 GTC.

Material and labour for laying & spreading of hard core, broken stone boulder to gauge not excedding 63mm in plinth of upto thickness 100mm for making platform of sintax water tank.

Material and labour for cement concrete type D2 1:4:8, 40mm graded aggregate upto 100mm thickness all as specified and directed by Engr-in-charge.

Material and labour for reinforced cement concrete nominal mix in foundation including rafts footing, foundation beams , plinth beams , bases for column etc, basement slabs, under reamed piles & mass concrete type B1 1:2:4 , 20mm graded aggregate upto 150mm thickness all as specified and directed by Engr-in-charge.

Material and labour for steel reinforcement for concrete mild steel TmT bar 8mm dia, (150x150) mm Square box & over cut to length, bent to shape required, including cracking,bending spirally for looping for columns,hooking ends & binding waish and including mild steel wire (annealed) not less than 0.9mm dia or securring with clips.

Material and labour for fixing of butt hinges,heavy duty weight cold rolled mid steel of size 100mm all as specified and directed by Engr-in-charge.

Material and labour for prepration of new surface of MS channel,angle Flat Iron steel fabric etc with one coat of Red Oxide Primer & one Coat Synthetic enamaled paint all as specified & directed by Engr-in-Charge.

Supply & fixing Ball Brass valve high pressure with Polythene Flaot & Fly nut complete screwed for iron pipe or brass ferrule suitable for 40mm bore Inlet pipe all as specified & directed by Engr-in-Charge.

Material and labour for mild steel sliding door bolts plate type,store enamelled black with bright bolts not less than 12mm dia with & including a minimum 6 bolts & nuts, four as plate, two as staple plate and length of bolts not less than 200mm all as specified and directed by Engr-in-charge.

Amount of credit of Rs. 43166.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.