Military Engineer Services Tender

Lump sum price worked out by the Contractor for "INTERNAL WATER SUPPLY AND WATER TANK WORKS " as as listed in Sch 'A' Sec IV

Lump sum price worked out by the Contractor for "SEWAGE DISPOSAL " as as listed in Sch 'A' Sec V

Lump sum price worked out by the Contractor for "ROAD PATH WORKS " as as listed in Sch 'A' Sec VI

Lump sum price worked out by the Contractor for "PROTECTIVE WORK " as as listed in Sch 'A' Sec VII

Lump sum price worked out by the Contractor for AREA DRAINAGE " as as listed in Sch 'A' Sec VIII

Lump sum price worked out by the Contractor for " EXTERNAL WATER SUPPLY WORK" as as listed in Sch 'A' Sec IX

Lump sum price worked out by the Contractor for " EXTERNAL ELECTRIC SUPPLY" as as listed in Sch 'A' Sec X

Lump sum price worked out by the Contractor for "DEMOLITION & DISMANTLING" as as listed in Sch 'A' Sec XI

Lump sum price worked out by the Contractor for "DEMOLITION & DISMANTLING" as as listed in Sch 'A' Sec XI

Schedule 'A'Section-XIII (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

INTERNAL ELECTRICAL SUPPLY WORKS Concealed point wiring in hollow part of LGSF wall with fixing accessories using approved colour coding as per IS, with 1.5 Sqmm (nominal area), single core multistranded copper conductor of 1100 volts grade, ISI 694 marked, PVC insulated and unsheathed FRLS-H, drawn through and including heavy duty PVC conduit (minimum 25mm bore size 2mm wall thickness) and conduit accessories ISI marked, PVC junction boxes etc, with pressed steel concealed terminal boxes covered with modular sheet and cover plate concealed in walls/ceiling/floors including 1.5 Sqmm (nominal area), single core multistranded copper conductor of 1100 volts grade, ISI 694 marked, PVC insulated and unsheathed FRLS-H as earth continuity conductor to common earth & connecting to earth dolly for the following :-

One light/bell/fan point (Ceiling/ Wall/ Exhaust) controlled by one number one way switch or one number one way switch and regulator

One 5/6 Amps socket outlet/switch socket outlet on independent board

Concealed point wiring in hollow part of LGSF wall with fixing accessories using approved colour coding as per IS, for 15 Amps socket outlet on independent board with 4.0 Sqmm (nominal area), single core multistranded copper conductor of 1100 volts grade, ISI 694 marked, PVC insulated and unsheathed FRLS-H, drawn through and including heavy duty PVC conduit (minimum 25mm bore size 2mm wall thickness) and conduit accessories ISI marked, PVC junction boxes etc, with pressed steel concealed terminal boxes covered with modular sheet and cover plate concealed in walls/ceiling/floors including 4.0 Sqmm (nominal area), single core multistranded copper conductor of 1100 volts grade, ISI 694 marked, PVC insulated and unsheathed FRLS-H as earth continuity conductor to common earth & connecting to earth dolly. Notes for item Nos. 13 to 14 : (a) Modular metal flush boxes, modular cover plates with frame shall be deemed to be included in rate quoted against respective items of BOQ. (b) Switches/sockets etc shall be measured and paid separately under respective items of Sch 'A'/BOQ here-in-after. (c) Cost of cutting/chases for concealing of conduit shall be deemed to be included in quoted lump sum of Sch 'A' Section-I.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engr in charge

S&F LED lights fitting 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with 3core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed by Engr-in-charge.

S&F LED light fitting mirror type with high out put diffuser 600mm long, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as directed by Engineer-in-Charge.

S&F LED building secuity light 25 watt complete with with suitable bracket made of light grade 25mm GI pipe of length of 1.2m and MS calmps complete all as specified & directed by Engr-in-charge.

S&F Motion Sensor switch consisiting of sensitivity detector with wide detection field, integrated circuit, having automatism (day & Night), convenience, safety, saving energy and practicality functions of power indication and detection indication. Operation on receiving human motion infrared rays on entering the detection field, comprising of the following features and specification as give under:- Specification: (a) Power Source: 110-220V/AC (b) Detection range: 360 degree (c) Power Frequency; 50 Hz (d) Ambient Light: 3-2000Lux (adjustable) (e) Working temperature: -20°C to +40°C (f) Working Humidity: 93% (g)) RH Time Delay: Min: 10sec+3sec Max: 30min+2min (h) Installation Height: 2.2-6m (j) Power Consumption: 0.45W (work) 0.1W (static) (k) Rated Load: Resistive max. 2000W, CFL Max. 1000W (l) Detection Motion speed: 0.6-1.5m/s (m) Detection Distance: 1-8m max Function: (a) Identification of day and night (b) Consumer adjustable work ambient light (c) Work in daytime and at night are adjusted on the "sun" position (max) (d) Ability to work in the ambient light less than 3 Lux on adjusted on the moon position(min) (e) Time-Delay is added continually on reciept of second induction signals after the first induction. (f) Having compute time once more on the basic of the first time-delay rest. (g) Adjustable time delay having minimum time is 10sec+3sec & maximum is 30min+2min as per requirement complete all as specified and directed.

S&F VTPN 4 way double door prewired distribution board TPN-DPX 100 MCCB including one no. MCCB 100 Amps, 25 kA, 4 pole as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete all as specified and all as directed. Note : 1. Rates of MCCB shall deemed to be included in the quoted rates. 2. MCB SPN/SP/TP will be measured seperatly.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point, including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified & directed.

M&L for brick masonary valve pit of size 450x450x450mm dimensions, one brick thick valve pit of following internal dimension with two nos. of RCC slab cover of siutable size with handle to lift atleast 75mm thick having provision of valve key slot , earth work and PCC in foundation (1:3:6) Type C2 using 40mm graded stone aggregete 150 mm thick, PCC in coping on top (1:2:4),Type B1 using 20mm graded stone agregate 100mm thick including rendering 15mm thick and two coat of white wash on exposed surfaces on external wall above ground level complete all as specified and directed by Engr-in-charge. Note: RCC slab rate are inclusive in the rates.

Cutting of existing line in certain "Tee" of 40/50mm bore to extend of water line.

Supplying and laying of drainage composite for use behind walls, between two different fills along side drains of road below concrete lining of canals etc geo-composite for planar drainage, realized by thermo binding a draining core in extruded monofilaments with two filtering non woven geo-textiles that may also be working as separation or protecting layers. The draning three dimensional core will have a 'W' configuration as longitudinal parallel channels with two filtering UV stabilized polypropylene non woven geo-textile of min thicknessof 0.75 mm characteristic opening size (O90) of 110 micron and tensile strength of 8KN/M that will be working as separation or protecting layers. Geo composite having in plane flow capacity of 2.1 ltr/ms at hydraulic gradient of 1.0 and 20Kpa pressure and tensile strength of 18KN/M with mass per unit area of 740 gsm, supplied in the form of roll for easy transportation to site of work as per detail specification complete all as directed by GE.

Plantation of deodar trees incl tree guard made out of mild steel weld mesh weight not less than10 kg/each and digging holes60cm dia in soft/loose soil and refilling the same with mixture of clean earth and manure/cowdung in ratio of 2:1 incl watering, dressing and levelling etc complete all as specified and directed

Note: For the purpose of arriving at lumpsum amount, the amount of credit sch for buildings and other services i.e Sch 'A' section XII (i.e Rs 178810.00 shall be deducted from the total amount arrived.