Military Engineer Services Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date31 Aug 2024
Closing Date5 Oct 2024
Tender Amount₹ 84,88,000
Costs
EMD
₹ 1,52,400Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_668655_1Bid Award Id
ViewTender No
CWE/Y-40/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Demolition of brick work or stonework built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings ,dressed stonework and precast concrete articles and stacking the serviceable materials within 100m and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.
17.92
-
-
Taking down cement plaster including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed
1430
-
-
Taking down and removing chowkats with shutters (without taking off shutters from chowkat) not exceeding 1.50 Sqm each complete all as specified and directed.
72
-
-
Taking down and removing chowkats with shutters (without taking off shutters from chowkat) exc 1.50 Sqm but not exc 4.00 Sqm each complete all as specified and directed. .
128
-
-
Dismantling timber in scantling 40 sqcm and over in section, framed work complete all as specified and directed.
0.9
-
-
Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
310
-
-
Dismantling plain or corrugated steel sheets any gauge thickness including Nanital or similar pattern roof covering including ridges complete all as specified and directed.
753
-
-
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises. complete all as specified and as directed.
683
-
-
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.
3.72
-
-
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
120
-
-
Taking down steel water tubing 15 mm bore including all fitting and connections complete all as specified and directed.
150
-
-
Taking down steel water tubing 20 mm bore including all fitting and connections complete all as specified and directed.
90
-
-
Taking down steel water tubing 25/32 mm bore including all fitting and connections complete all as specified and directed.
125
-
-
Demolition and breaking up upto 75/110mm bore drain pipes (SGSW/AC/RCC/PVC), set in CM , complete all as specified and directed.
282
-
-
Plain cement concrete 1:2:4 ( nominal mix ) type B-0 (using 12.5mm graded crushed stone aggregates) as in cement concrete in roof kerbs or mud stops, rounded or chamfered on edges, lintels upto 1.5m clear span, cills, steps; seismic and other similar ands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork where required complete all as specified and directed.
10
-
-
PCC 1:3:6 (nominal mix) type C-1 (using 20mm graded crushed stone aggregates) as in surface channel and drains including necessary form work complete all as specified and directed.
2.5
-
-
PCC 1:5:10 (nominal mix) type E-2 (using 40mm graded crushed stone aggregates) as in sunken floor complete all as specified and directed.
2.5
-
-
RCC 1:2:4 (nominal mix) type B-1 (using 20mm graded crushed stone aggregates) as in Fins, fascias, louvres, parapets and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and directed.
4
-
-
Precast rein-forced cement concrete as in landing, cover slabs (for manhole etc) and similar articles with precast cement concrete Type B-1, 1:2:4 (20mm graded crushed stone aggregate) and setting in cement mortar 1:4 complete all as directed.
2
-
-
Use & waste of form work to suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces of flat concrete, complete all as specified & directed.
39.5
-
-
Brick work with old size fly ash bricks, class 7.5, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 all as specified & directed.
7
-
-
Brickwork with flyash bricks, straight or curved
on plan to any radius in half brick thick walls,
built in cement mortar 1:4 all as specified & directed.
8
-
-
Walling of random rubble stone masonry, uncoarsed, well bonded, bedded and soilidly hearted, built in CM 1:4, complete all as specified and directed.
3
-
-
All as per item 26 above but except stone
7
-
-
Cutting chases, in brick walls ,pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified.
250
-
-
Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified.
350
-
-
Pressed steel frame using 1.25 mm thick PBI sheet (size of frame 105 x 60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock/ strike plate etc and filling with PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in back of chowkats complete all as specified.
250
-
-
Pressed steel frame using 1.25 mm thick PBI sheet (size of frame 165 x 60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock/ strike plate etc and filling with PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in back of chowkats complete all as specified.
260
-
-
WPC(Wood Polymer Composit) Double Prelam Door Frame(Chowkhat) of Size 120mm x 50mm with a wall thickness of 5mm(+/- 0.25), made out of extruded 5mm(=0.25) mm thick PVC Sheet of Density 600kg/cbm manufactured y an ISO 9001-2015 certified company and by joining 3 Nos heat moulded PVC Sections. The high section of size 35 x35 mm shall be maid from plain colour PVC sheet of 5mm(=/- 0.25 mm) thickness. The inside section will be covered with 5mm thick PVC sheet'C' shape covering section of size 120mm x 50mm. At centretop position 5mm(+0.25mm) thick 50 x50 x50 mm pattam section should be pasted with solvent cemen adhesive to make double pattam of frame. The frame shall be mitre cut at two corners & joined with 4 nos of 150mm long 'L' brackets of 19 x 19 mm M.S sq, Tube or fusion heat welding process. The two vertical door frames are to be reinforced with 25 x 25 mm M.S sq Tube of 19 gauge throughout the frame. The Door Frame shall be fixed to the wall using 8/100mm fischer screws. A minimum of 4 nos of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc. co mplete as per manufacture's specification & direction of engineer-in charge.
155
-
-
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as shown on page No 176 to 183 of MES SSR 2020 Part-II compete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
85
-
-
2nd class hardwood (Sal) plain solid straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
0.9
-
-
Factory made fully glazed solid panel PVC window/vent shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
13
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of solid core single Leaf Flush Door of 25mm thickness, lipped with 15mm(5mm x 3) thick x 30 mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30 mm width on the other stiles & bottom rails. The inner panel Laminated with 2mm thick termite proof, water proof & fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain &/or prelam colors on one side after routing the mouldd design on flush door & 2mm plain and/or prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the lipping etc. complete as per direction of Engineer-in-charge, manufacture's specification and drawing.
45
-
-
35mm thick , Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on one side and one face covered with decorative face veneer with lipping/frame to match complete all as specified and directed.
160
-
-
35 mm thick 2nd class hard wood (Sal/Hollock) glazed & skeleton factory made shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass, etc, sizes of members of door shutters as specified in SSR- 2009 Part-I Section 8.24(a) complete all as specified and directed.
92
-
-
Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x 35mm double rebated comprises gauged, glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No's for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:- (i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge. (viii) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 06/07. Make : As per Appendix 'C'. Note:-(i) Above referred drawing has not been made part of tender. The same can be seen in the office of GE during working hours on any working day.
54
-
-
Aluminium handles, cast type, anodised of size 150 mm complete all as specified and directed.
200
-
-
Aluminium anodized barrel tower bolt of extruded section of size 75mm and fixed complete all as specified and directed.
120
-
-
Mild steel butt hinges of size 100mm medium weight cold rolled complete all as specified and directed.
240
-
-
Aluminium anodised, barrel tower bolts of extruded
section and fixed of size 200mm and fixed, complete all as specified.
200
-
-
250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
32
-
-
Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified.
120
-
-
Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia 100mm size complete all as specified and directed.
32
-
-
Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm, complete all as specified and directed.
112
-
-
300mm, Mild Steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
28
-
-
Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
64.4
-
-
Sheet glass, 3mm thick ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm each pane complete all as specified and directed.
35.1
-
-
3mm thick, Figured glass, pin head type in squares not exc 0.5 sqm in each pane, complete all as specified and directed.
9.1
-
-
Aluminium anodised snap grid frame work of size of size 605 mm X 605 mm as in false ceiling, flat or sloping (pattern as per manufacturer's catalogue/ instructions), cutting holes for electrical fittings fixed on and including aluminium tee of size 25mmX25mmX1.50 mm as main runner, aluminium tee of size 25mmX25mmX1.25 mm as cross runner and aluminium angle of size 25mmX25mmX1.25mm at the perimeter suspended from soffit at approx 900 mm centre to centre with hangers 6 mm dia galvanised (length as per site requirement) adjusting level fixed to roof by means of ceiling cleats made out of galvanised iron flat 40 mm X 3 mm size, 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long including 4mm thick non asbestos fibre cement building designer board fixed in ceiling including necessary scaffolding all as specified and directed. Note : The board shall be as per IS-14862 and shall be manufactured from homogeneous mixture of cement, quartz and cellulose and shall be cured with high pressure steam using auto claving process
310
-
-
18/19mm thick, Prelaminated particle board, interior grade, prelaminated one side with decorative
choice lamination & other side balancing
white lamination, fixed with screws to timber frame work complete all as specified and directed.
120
-
-
Veneered particle board for external teak wood lipping fopr 18/19 mm thick board, 6mm thick fixed with nails, complete all as specified.
110
-
-
Veneered particle board for external teak wood lipping fopr 40 mm thick board, 6mm thick fixed with nails, complete all as specified.
80
-
-
Continuous (piano) hinges,mild steel, bright finish or electrogalvanised, width of flap 40mm (when opened), complete all as specified.
250
-
-
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
742
-
-
Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
109
-
-
Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.60mm thick of an colour having tensile strength of 550 Mpa as in valley gutter, fixed with self tapping screws as specified.
58
-
-
Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.
360
-
-
Rolled mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to grade Fe 410 -W (Gde-E- 250) quality-A, complete all as specified and as directed.
390
-
-
Rolled mild steel work in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming toFe-410- W(Gde- E-250) quality- B, complete all as specified and as directed.
1500
-
-
Mild Steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;
ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165all as specified and directed.
550
-
-
Plain cement concrete 1:3:6, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen and two parts of heated coarse sand (by volume), all as specified. Note:- The unit rate include for use of form work (straight or curved).
146.1
-
-
75mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in sub base complete all as specified and directed. .
50
-
-
25 mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregates) as in floor finish, surface finished even and fair to receive top finish complete all as specified and directed.
50
-
-
Mat finish, premium quality, joint free (edge cut), coloured/ printed Non -Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed.
125
-
-
Mat finish, premium quality, joint free (edge cut), coloured/ printed Non -Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed.
615
-
-
Mat finish, premium quality, joint free (edge cut), coloured/ printed Non -Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, as in skirting/vertical surfaces etc , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Size/Shade/Colour of tile shall be approved by the GE.
90
-
-
Glazed ceramic coloured tiles of size 450x 250x 7
mm/450X 350X 7mm x 7mm thick as in skirting/vertical surfaces etc , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Size/Shade/Colour of tile shall be approved by the GE.
579
-
-
Marble work (Udaipur Green) 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade laid over and including 15mm thick rendering in cement mortar 1:6 , including necessary cutting, complete, all as specified.
37.2
-
-
Machine cut kota stone slab flooring 20-25 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:6 including cutting, rubbing, grinding and polishing to achieve mirror finish complete, all as specified.
72
-
-
Machine cut kota stone slab flooring 20-25 mm thick as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab,as in in skirting, dados, risers to steps etc, laid over and including 10mm thick rendering in cement mortar 1:4 , cutting, rubbing, grinding and polishing to achieve mirror finish complete, all as specified.
14
-
-
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/
shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;, complete all as specified.
190
-
-
Chequered cement concrete coloured tiles, homogenious texture glossy finished , chemically coated machine pressed 30 cm x 30cm x 25mm thick set, jointed and pointed in near cement slurry in floor with gray cement and pigment and including 15 mm thick cement screed in cement mortar 1:4 complete all as specified and directed. Shade/Colour of tile shall be approved by the GE.
20
-
-
Rendering cement plaster 15 mm thick in cement mortar 1:6 (1 cement : 6 coarse sand), on other than fair faces of brick wall or on stone masonry surfaces, trowelled to even and smooth finish without using extra cement complete all as specified.
500
-
-
Rendering cement plaster 10mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling, surface finished even and smooth without using extra cement, all as specified.
30
-
-
Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer), mixed with water proofing compound @ 3% by weight of cement on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified. ( Note : WPC will be measured and paid separately under respective Item of BOQ)
1100
-
-
Rendering cement plaster 10mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers (5mm thick first layer and 5mm thick second layer), mixed with water proofing compound @ 3% by weight of cement on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified. ( Note : WPC will be measured and paid separately under respective Item of BOQ)
150
-
-
Water proofing treatment of sunken portion using shaliurethane-BTD of STP make or equivalent mentioned in Appendix 'C' high solid content component water based liquid applied elastometric water proofing membrane as ASTMC 836 and ASTMD 6083, thickness of the membrane shall be 1.50 mm having solid content of more than 80% elongation of 500+(-) 50% laid over reinforcing layer on non woven geotextile mesh of 40/ 50 gms including applying self primer coat by diluting with 1:1 ratio @ 0.20 Kg per square metre and surface preparation, complete all as per manufacturer's instructions/ specifications and as directed.
150
-
-
Supply only intergal water proofing compound, complete all as specified.
320.16
-
-
Taking down cement plaster/decayed concrete from RCC roof projections/upward parapet walls/down facia/soffits and fins of RCC chajjas/beams/columns/balconies etc. and also applying one coat of anti corrision paint to visible reinforcement if any. Supply and fixing by means of nailing wire netting of galvanised wire 1.40mm dia and mesh size 20mm and brushing neat cement slury with 3.00 Kg of cement/sqm and M&L for 20mm thick cement rendering in two layers of 10mm each (top/final layer shall be rendered after final setting of under layer) in Cm 1:3 on concrete surfaces including scaffolding at a height upto 7.00 mtrs etc complete all as specified and directed.
50
-
-
Preparation of new plastered or unplastered surfaces of walls with plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and provide Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)complete all as specified and directed.
1100
-
-
Preparation of new plastered or unplastered surfaces of walls with plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of oil bound distemper complete all as specified and directed.
500
-
-
Preparation of new plastered or unplastered surfaces with plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying one coat of oil bound distemper on ceiling complete all as specified and directed.
30
-
-
Preparation of old or previously treated plastered or unplastered surfaces of walls including complete removal of existing treatment with plaster of paris putty of 2 mm thickness over unplastered surface to prepare the surface even and smooth and applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.
350
-
-
Preparation of steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
108
-
-
Preparation of wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
500
-
-
Preparation of old steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
290
-
-
Preparation of old or previously treated plastered surfaces of walls and applying two coats of oil bound distemper over plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
2306.23
-
-
Preparation of old or previously treated plastered or unplastered surfaces including complete removal of existing treatment and applying one coat of oil bound distemper on ceiling complete all as specified and directed.
371.32
-
-
Preparation of new plastered surfaces or un plastered, previously undecorated wall surfaces and applying two coats of cement base paint over one coat of white wash, complete all as specified and directed.
100
-
-
G I tubing medium grade of 32 mm bore, 450mm long in single piece as in spout pipe insunken floor complete all as specified and directed.
7.2
-
-
Harrison rail (Curtain rail), anodised aluminium body, with and including fixing brackets, stops, rollers etc. complete all as specified
290
-
-
Sink with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 910mm x 460mm bowl size 410mm x 330mm x 160mm , fixed in repair complete all as specified and directed.
16
-
-
Angle valve/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified.
64
-
-
Stop valve, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified.
32
-
-
Bib tap, cast copper alloy ,chromium plated, fancy type , screwed for iron pipe or for brass ferrule of 15 mm bore, fixed in repair complete all as specified and directed.
48
-
-
Chromium plated brass shower rose, fancy type, 125mm size with shower arm, chromium plated, 195mm long with bend of 45° with flange suitable for 15mm bore pipe with swivel joint fixed to pipe in repairs, complete all as specified.
16
-
-
Soap dish, SS, approximate size 160x 160x90mm, any type, fixed to plugs with chromium plated brass screws, fixed in repair complete all as specified.
16
-
-
Steel plate rack of overall size 600mm x 750mm x 250 mm made of stainless steel having thickness 1mm, fixed over fixing over 40cm long MS angle of size 25mmx25mmx3mm - 02Nos each , fixed in repair complete all as specified and directed.
16
-
-
Brass CP Sink mixer , swan neck for mixing hot & cold water screwed down for iron pipe and fixed,15mm size, complete all as specified.
32
-
-
Brass chromium plated tubular towel rail 20 mm dia, "D" type, 60 cms long between flanges fixed in repairs with and including chromium plated brass brackets, brass screws complete all as specified
16
-
-
PVC valve less, crystal white, syphonic action type flushing cistern 10 litre capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long and 15 mm dia 600 mm long PVC connection with CP brass coupling nuts and PVC washers at both ends fixed, fixed in repair , all as specified..
16
-
-
Vitreous China wash down water closet (pedestal pattern), white including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC white seat cover and chromium plated jet including PVC connection, fixed complete including demolition of old unservicable WC and provision of plain cement concrete M-15, type B-1 using 20mm graded crushed stone aggregate, fixed in repairs all as specified. Make: Cat Part No. 2008 for EWC, 2308 for seat cover, 2201/B for internal fittings of 'Cera' or equivalent makes mentioned in PS.
8
-
-
Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc, fixed in repair all as specified. Make: Cat Part No. 2071 of 'Cera' or equivalent makes mentioned in Appx.
8
-
-
Wash basins, Vitreous China , oval bowl design: 400x400x195 mm, coloured including new brackets with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with PTMT coupling nuts at both ends, trap, grating and Union for discharge pipe, waste, chain and plug and porcelain stopper, waste pipe of polythylene of low or high density or PVC of 32mm dia , 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed, complete fixed in repair all as specified.
Make: Cat Part No. S2040161 of Cera or equivalent in makes mentioned in Appx
16
-
-
600x450 mm bevelled edge mirror of slected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screwed and cup washers.
16
-
-
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
16
-
-
16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
150
-
-
20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
90
-
-
32mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
125
-
-
20mm bore tank adaptor suitable for CPVC pipes SDR 11 complete all as specified.
16
-
-
20mm bore union suitable for CPVC pipes SDR 11 complete all as specified.
16
-
-
16mm bore Female Brass Threaded Adaptor (FTA/ FBTA) suitable for CPVC pipes SDR 11 complete all as specified.
48
-
-
16mm bore Brass Elbow suitable for CPVC pipes SDR 11 complete all as specified.
60
-
-
Brass Elbow reducer (3/4 X ½) suitable for CPVC pipes SDR 11 complete all as specified.
16
-
-
16mm bore Brass Tee suitable for CPVC pipes SDR 11 complete all as specified.
16
-
-
PVC (SWR) 75mm bore (dia) soil, waste and ventilating pipe, singe socketed, in any length with Rubber Ring laid in trenches or in floors, fittings, etc, complete all as directed and all as specified.
64
-
-
PVC (SWR) 110mm bore (dia) soil, waste and ventilating pipe, singe socketed, in any length with Rubber Ring laid in trenches or in floors, fittings, etc, complete all as directed and all as specified.
48
-
-
PVC (SWR) 75mm bore (dia) soil, waste and ventilating pipe, singe socketed, in any length with Rubber Ring Joints fixed to walls, fittings, etc, complete all as directed and all as specified.
70
-
-
PVC (SWR) 110mm bore (dia) soil, waste and ventilating pipe, singe socketed, in any length with Rubber Ring Joints fixed to walls, fittings, etc, complete all as directed and all as specified.
100
-
-
PVC (SWR) 110mm bore (dia), Bends any type, with access door, with disminishing pieces or tapers and Jointing with Solvent Cement, complete all as specified and as directed.
12
-
-
PVC (SWR) 75mm bore (dia), Bends any type, with disminishing pieces or tapers and Jointing with Solvent Cement, complete all as specified and as directed.
32
-
-
PVC (SWR) 110mm bore (dia), Single T Junction equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.
16
-
-
PVC (SWR) 75mm bore (dia), Single T Junction equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.
16
-
-
110 mm bore PVC (SWR) vent cowl, complete all as specified.
8
-
-
PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified.
8
-
-
PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75mm bore pipe, complete all as specified.
48
-
-
PVC connections 15 mm size with PTMT nuts of length 600mm fixed in repair complete all as specified and directed.
48
-
-
32mm bore High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm, as in waste pipe to sink/WHB , complete all as specified.
25.6
-
-
Rotational moulded polyethylene water storage tank 500 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with PVC float valve 25mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including taking down old tank complete all as specified.
16
-
-
Taking down point wiring with aluminium/ copper conductor for light point, socket point/ power point etc. in PVC casing and caping, surface pvc/ steel conduits, wood batten with clips including taking down board any type and size complete with any type of switches, sockets, holders, (batten or pendent type), ceiling rose etc. The light fittings (any type), main switches, distribution board with MCB’s of any capacity and make are to be removed/ replaced if required and all as specified and directed. NOTE: - Existing ceiling/ exhaust fan and electric meters are to be refixed and connected properly where required.
372
-
-
Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surface complete all as specified and directed.
16
-
-
Point wiring with copper conductor cable multistrand, PVC sheathed 1.5 Sqmm size(two run with colour code RYB for phase and black for neutral) for one light point ,fan point, exhaust fan point,or bell point controlled by one switch including one run of 1.5 Sqmm (as continous earth wire Green)multistrand PVC concealed conduit of approved size and quality ISI marked,including all other required accessories as specified in preamable 1(a) to (q) of section 19 of SSR Part-II under heading 'point wiring' fixedon wall/ceiling including concealed PVC/MS pressed steel cadmium plated modular terminal box not less than 1.6 mm thick for mounting switches, sockets, fan regulators etc and 3 mm thick modular laminated sheet top cover(ISI marked)cutting,chasing,pinning and making good the disturbed surface by using cement mortar 1:3 complete all as specified and directed by Engr-in-charge.,(Note:-the rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plasterand matching the surface by white wash/colour wash all as per existing finishes complete).
272
-
-
All as per serial item No '135' above, but for one 3 pin 5 Amps socket outlet on the same board all as specified and directed.
32
-
-
All as per serial item No '135' above, but for one 3 pin 5 Amps socket outlet, independent all as specified and directed.
32
-
-
All as per serial item No '135' above, but one light point controlled by 2 two way switches all as specified and directed.
4
-
-
All as per serial item No. '135' above but for 3 pin 15 Amps socket out let independent with 2.5 Sqmm PVC copper conductor cable and and PVC insulated, unsheathed 2.5 Sqmm stranded copper conductor cable as continuous earth wire, all as specified.
48
-
-
Modular switch 1 way 6A, 1 module, complete all as specified.
320
-
-
Modular switch 2 way 6A, 1 module, complete all as specified.
8
-
-
Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified.
64
-
-
Modular Bell push 6A 1 module, complete all as specified.
16
-
-
Modular switch 1 way 16A, 1 module, complete all as specified.
32
-
-
Socket 6A/16A - 2/3 pin combined , 2 module, all as specified and directed.
32
-
-
Modular fan regulator, step type, 2 module, all as specified.
32
-
-
Buzzer, Ding Dong AC. 230 volts, single pole, all as specified.
16
-
-
Modular White cover plate with frame, 1 module, complete all as specified.
16
-
-
Modular White cover plate with frame, 3 module, complete all as specified.
64
-
-
Modular White cover plate with frame, 8 module, complete all as specified.
32
-
-
Ceiling rose, 65 mm to 50 mm, two to three terminals, PVC/ Polycarbonate, insulated body fixed on PVC block, all as specified.
272
-
-
Sub main wiring with two single core PVC insulated cable 1100 volts grade with copper stranded RLS conductor of size 6 Sqmm (2 single run) with one continuous FRLS copper earthing lead wire of size 6 Sqmm and drawn into PVC conduit/ casing & capping with all fittings/ accessories, junction boxes 1 to 4 way 20mm dia, cutting chases, making good in cement mortar (1:3), finishing surfaces to match with existing and connected to common earth dolly including taking down old unservicable submain wiring, complete and as directed. Note :- Two run (each run of 1 RM) of 6 sqmm copper conductor and one RM of earth wire of 6 Sqmm, shall be measured as one RM).
325
-
-
Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver., 18 watt LED,6500k, tube rod with all acessoreis internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including dismantling of unserviceable tube light all as specified and directed. Make: Havell's Cat Part No. LUMILINEBS18WLED865SPCWH of "Havells" or equivalent in makes mentioned in Appendix
48
-
-
Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental
friendly, energy efficient ready to use pack. 1x20W, 6500K ,230V, connector block etc complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including dismantling of unserviceable tube light all as specified and directed. Make: Havells cat part No. LHEXAWP7IN1W020 or equivalent in Appx
136
-
-
Endura Pearl 30Watt New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting including bracket of suitable size, complete all as specified
Make: Havells cat part No. ENDURASUNDOWNSL30WLED757PASYBOPC or equivalent in Appx
8
-
-
MCB SPN 40-63 Amp, 240 Volts, 10 KA all as specified.
6
-
-
MCB SP 6 to 32 Amp, 240 Volts, 10 KA all as specified.
96
-
-
MCB TPN 100 Amps , 415 Volts, 10 KA all as specified.
3
-
-
Sheet metal enclosures for DBs when MCBs to be used, single pole and neutral, 8 way, double door, 240 volts with 200 Amp rated bus bar completed all as specified.
16
-
-
Sheet Metal enclosures distribution board iron clad TPN DB double door with IP-43 protection 415 Volts 3 Phase 50 HZ 4 Way complete with appropriate size of copper busbar and neutral link complete and incl cutting chasing to wall for fixing DB and making good the disturbed wall to match with existing surface complete all as specified
3
-
-
Concealed sheet metal enclosure with socket plug top and MCBs having single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20Amp 240V complete all as specified and as directed.
16
-
-
Taking down ceiling fan of any sweep any size any make from existing position from any height by disconnecting electric connection and transporting to work shop, inspection of ceiling fan in presence of JE incharge(or rep of department) after dismantalling spare parts. Transporting ceiling fan back from workshop to store yard including hanging fixing and connecting up and testing etc complete all as required at site and directed by Engr-in-charge
32
-
-
Complete repair and maintenance of unserviciable ceiling fan of 1200mm/1400mm sweep at workshop including dismentalling complete the ceiling fan parts i.e Blades, fan rod, canopy,connections inspecting serviciability of all the parts refixing of serviciable parts after cleaning and replacement of unserviciable parts with companies with genuine parts i.e capacitor,bearing,bushes,shaft(rubber bush connecting wire PVC connector aluminium clamps for rod bush rods blades and greasing oiling etc including repaint assembling cleaning and testing of ceiling fan as directed.
32
-
-
Removing of old burnt winding any type cleaning stator complete for burnt wiring carbon residue and rewinding of stator winding of any type any make fan any stator design ceiling fan of 1200mm sweep with superior quality super enemaled winding copper wire of existing specifications guage and weight with superior quality insulation of satisfactory functioning inpresence of JE incharge complete all as directed by Engr-in-charge
32
-
-
Taking down exhaust fan of any sweep any size any make from existing position from any height by disconnecting electric connection and transporting to work shop, inspection of exhaust fan in presence of JE incharge(or rep of department) after dismantalling spare parts. Transporting exhaust fan back from workshop to store yard including hanging fixing and connecting up and testing etc complete all as required at site and directed by Engr-in-charge
32
-
-
Complete repair and maintenance of unserviciable exhaust fan of any sweep at workshop including dismentalling complete the exhaust fan parts i.e Blades, fan rod, canopy,connections inspecting serviciability of all the parts refixing of serviciable parts after cleaning and replacement of unserviciable parts with companies with genuine parts i.e capacitor,bearing,bushes,shaft(rubber bush connecting wire PVC connector aluminium clamps for rod bush rods blades and greasing oiling etc including repaint assembling cleaning and testing of exhaust fan as directed.
32
-
-
Removing of old burnt winding any type cleaning stator complete for burnt wiring carbon residue and rewinding of stator winding of any type any make fan any stator design exhaust fan of any sweep with superior quality super enemaled winding copper wire of existing specifications guage and weight with superior quality insulation of satisfactory functioning inpresence of JE incharge complete all as directed by Engr-in-charge
32
-
-
Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below ground level, connecting to galvanised iron wire 4.0mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15mm bore including provn of concrete pit in PCC (1:2:4), type B-I using 20mm graded crushed stone aggregates with 40mm thick precast cover of size 550 mm X 550 mm X 75 mm of RCC (1:2:4), type B-I, reinforced with XPM (weight not less than 4 kg/ Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion.
3
-
-
Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 34 of tender doucments.
-
-253371
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements