Military Engineer Services Tender

Taking down sub main wiring of any size and type in any position including metallic/non metallic PVC conduit complete all as specified and directed.

M&L sub main wiring with two single core PVC insulated unsheathed FRLSH confirming ot IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No.) cable 1100 volt grade, 6 Sqmm size drawn in and including non metallic rigid PVC concealed/surface conduit medium grade (ISI marked with valid CML No.) not less than 25mm dia confirming to IS 14930 (Part-I) 2001, with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH copper conductor (ISI marked with valid CML No.) colour code as a earth continuity and connected upto DB complete all as specified and directed. Note:- (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting, chases in wall/pillars/columns etc. of any description for concealing where required the conduits as required depth & making good the disturbed surface in CM 1:4 including finishing the surface with putty to match with the existing surface.

All as per item No. 5 but for 2 run of single core PVC insulated unsheathed FRLSH 1.5 Sqmm copper conductor wire drawn in and including 20mm dia conduit pipe with one run of 1.5 Sqmm PVC insulated unsheathed FRLSH copper conductor wire as earth continuity conductor complete all as specified and directed.

S&F in repairs PVC rectangular block for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 100x100mm and 50mm deep complete all as specified and directed.

All as per item No. 7 here-in-above but of size 175x100x50mm deep

S&F in repairs switch piano flush button single pole one way 5 amp complete all as specified and directed.

S&F in repairs switch piano flush button single pole one way 15 amp complete all as specified and directed.

S&F in repair of old unsv LED luminaire 600mm x 600mm 36 watt, 220 volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting upto drive with reqd length not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection to connector of LED fitting including testing on completion & taking down old unsv fittings complete all as specified and directed.

S&F in repair old unsv security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60 mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 FI, 15cm long, 8mm dia bolts and nuts with washers grouted in wall complete including reqd length 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing and taking down old unsv fittings complete all as specified and directed.

S&F in repair LED 40 watt decorative light fitting with aluminium enclosure suspended mounting arrangement with IP 65 complete all as specified and directed.

M&L bending & shaping 25mm dia galvanised iron pipe light grade over all length 0.60 mtr including necessary clamps, brackets, nut and bolts fixed to wall/pole as per site requirement including fixing on pole with light fittings complete all as specified and directed.

S&F PVC three core copper conductor 2.5 Sqmm cable alongwith PVC pipe for protection and connection from junction box to LED fitting complete all as specified and directed.