Military Engineer Services Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date22 Oct 2024
Closing Soon18 Nov 2024
Tender Amount₹ 41,98,000
Costs
EMD
₹ 83,960Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_680713_1Tender No
GE(I)/JUT-63 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Removing excavated material exc 250M but n.exc 500m and depositing where directed at a level n.exc 1.5M above the starting point, complete all as specified and directed.
10.48
-
-
M&L for surface dressing not exceeding 15 cm deep and getting out in soft/ loose soil, complete all as specified and directed.
195
-
-
M&L for PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregate as in filling, fdn, mass concrete and sub base of floors complete all as specified and directed.
4.44
-
-
M&L for Form work to sides and soffits of floor roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc rough finished surface of concrete complete all as specified and directed.
39
-
-
M&L for Form work to sides of pillars, posts, struts, peirs, columns rough finished surface of concrete complete all as specified and directed.
9
-
-
M&L for TMT bars 10mm dia & over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
355
-
-
All as per Srl item No 09.00 above but for 5mm dia and over up to and including 10mm dia as in stirrups complete all as specified and directed.
278
-
-
M&L for TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.
45
-
-
M&L for RCC 1:2:4, (Nominal Mix) Type B-1, using 20 mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the Chajjas,Chimneys and shafts, complete all as specified and directed.
1.5
-
-
M&L for reinforced cement concrete Nominal mix M-25, type using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 metre span complete all as specified and directed.
Note: Form work & reinforcement measured and paid separately.
3.88
-
-
M&L for reinforced cement concrete, Nominal mix, M-25, type using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.
Note: Form work & reinforcement measured and paid separately.
1.5
-
-
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete block and dump the waste materials outside MoD land (Jutogh cantt) complete all as specified and directed.
17.49
-
-
M&L for stone walling of random rubble, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed.
73.5
-
-
Removing cement mortar from and cleaning stones, obtained from masonry of any description (except ashlar facings and dressed stone work) and stone setts from pavings; stacking for measurement including all extra handling and removal and disposing off rubbish, complete all as specified and directed.
6.6
-
-
M&L for walling of squared rubble except stone built in , well bonded, bedded and solidly hearted, brought to courses or regular coursed, curved on plan to a mean radius not exceeding 6 m complete all as specified and directed.
Note: Stone recovered from demolition will be used and will be thoroughly cleaned by removing cement mortar and well cleaned with brush and water.
6.6
-
-
M&L for walling of squared rubble built in, well bonded, bedded and solidly hearted, brought to courses or regular coursed; curved on plan to a mean radius n. exc 6m complete all as specified and directed.
11.82
-
-
M&L for brick work with old size burnt clay bricks straight or curved onplan exc 6m mean raidus built in cm 1:6, complete all as specified and directed.
35
-
-
M&L for brick work with old size burnt clay bricks straight or curved onplan exc 6 m mean raidus built in half brick in CM 1:4, complete all as specified and directed.
5
-
-
M&L for Brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius and built in CM 1:4, complete all as specified and directed.
2
-
-
M&L for 75mm thick PCC 1:4 :8, type D-2, using 40 mm graded crushed stone aggregate as in sub base of floors, complete all as specified and directed.
227.25
-
-
M&L for joint free Non skid ceramic coloured tile 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.over and including 15mm thick screed and bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or colour cement to match with the existing surface etc., complete all as specified and directed.
26
-
-
M&L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over 10mm thick cement sand rendering (1:4), complete all as specified and directed.
65.4
-
-
M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surface, finished even and smooth without using extra cement, complete all as specified and directed.
130.9
-
-
M&L for rendering 15 mm thick on other than fair surfaces of brickwork or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement with WPC complete all as specified and directed.
Note : WPC shall be measured and paid separately.
238.1
-
-
Supply only Integral water proofing compound, complete all as specified and directed.
19.78
-
-
M&L for three coats of white washing after preparation of new plastered surfaces of wall complete all as specified and directed.
49
-
-
M&L for two coats of cement base paint over new plastered surface including preparation of surface, complete all as specified and directed.
100
-
-
M&L for hardcore of gauge n exc. 63mm deposited spread and levelled in layers n exc. 15cm thick watered and rammed to a true surface in broken stones and boulders complete all as specified and directed.
26.08
-
-
M&L for 75mm thick PCC 1:3:6, type C-1, using 20mm graded mechanically crushed stone aggregate as in Plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joint at the rate of 3 mtr centre to centre and at every turning &filling the joints with bitumen & sand mixture, complete all as specified and directed.
50.5
-
-
M&L for framed work such as grills, gratings, etc. with ends of bars shouldered/ screwed to wall or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe-290, Gde-E-165, complete all as specified and directed.
380
-
-
S&F for steel work in hollow tubular square and rectangular section trusses, purlins and bracing supports etc including any special shaped washer etc. complete using ERW or induction butt welded tubes, grade St.-240, complete all as specified and directed.
165
-
-
Dismantling plain or corrugated steel sheeting any guage thickness incl Nainital pattern as in roof covering complete all as specified and directed.
85
-
-
S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board, valley gutter etc, fixed all as per manufactures's instructions, fixed with self tapping screws at site with suitable arangement as required, complete all as specified and directed.
331
-
-
S&F for pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges ,flashing, eaves board, valley gutter etc, fixed all as per manufactures's instructions, fixed with self tapping screws at site with suitable arangement as required, complete all as specified and directed.
65
-
-
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 90 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length and making it good to match with existing surface, complete all as specified and directed.
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
14
-
-
S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.
Note: stainless steel butt hinges shall be paid separately however SS screws rates are included in the item itself.
5.67
-
-
S&F vitreous china wash down water closet pan ( EWC) including flushing cistern, seat and cover, PVC 10 Ltrs capacity, including low level incl flush pipe etc., complete all as specified and directed.
3
-
-
S&F vitreous china wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed.
3
-
-
S&F vitreous china half stall urinals flat back white minimum with grating and union for discharge pipe , providing & fixing plugs, bedding urinal against wall in CM 1:2 , securing urinal to plugs with & incl 60mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with nbrackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.
3
-
-
S&F 600mmx450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
6
-
-
S&F brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flanges, complete all as specified and directed.
3
-
-
S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and directed.
6
-
-
S&F 250mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed.
3
-
-
S&F for butt hinge, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.
9
-
-
S&F 150mm mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed.
6
-
-
M&L for 15mm bore 'Medium grade' GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
50
-
-
S&F 20mm bore medium grade tube galvanised with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
30
-
-
M&L for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.
3
-
-
S&F of 15mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed.
3
-
-
S&F for 15mm bore bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.
5
-
-
S&F pillar tap of 15mm bore dia,fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.
3
-
-
S&F 15mm bore stop valve, fancy type, CP, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.
9
-
-
S&F of 15mm size PVC connections with PTMP nuts of length 450mm complete all as specified and directed.
12
-
-
S&F PVC (SWR) pipes 110 mm bore dia single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
40
-
-
S&F PVC (SWR) pipes 75 mm bore dia single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
25
-
-
S&F PVC (SWR) bends 75 mm bore of any radius complete all as specified and directed.
9
-
-
S&F PVC (SWR) bends 110 mm bore of any radius complete all as specified and directed.
9
-
-
M&L for 75mm bore dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4, Type B-1, complete all as specified and directed.
5
-
-
S & F steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.
2.25
-
-
S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.
1.5
-
-
S & F figured glass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pan complete all as specified and directed.
1.5
-
-
On site construction of LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 05 user with upflow filter including media, complete all as specified and directed.
2
-
-
Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M-25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M dia x 1.5 M effective depth, complete all as specified and directed.
2
-
-
Removing excavated material (soils) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and directed.
43.5
-
-
M&L for Concrete bed to 150 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, in PCC 1:4:8, Type D-2, using 40 mm graded crushed stone aggregates, complete all as specified and directed.
25
-
-
M&L for 150 mm bore salt-glazed stoneware drain pipes, grade "A" laid in trenches and jointed complete all as specified and directed.
25
-
-
M&L for PCC 1:2:4, type B-1, using 20 mm graded crushed stone aggregates as in copings, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
3.5
-
-
M&L for providing precast cement concrete 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in cover slabs for manholes etc, set in cements mortar 1:6, complete all as specified and directed.
0.4
-
-
M&L for PCC 1:3:6, type C-2, using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete including sub base of floors and floor finishing complete all as specified and directed.
14.5
-
-
S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other
connecting plates (Fe 410-W, Gde-250, Quality-'A') etc complete all as specified and directed.
3130
-
-
S&F fibre reinforced translucent corrugated sheeting, 2mm thick with two corrugation side lap fixed with coach screws and washers, in roofs, wall etc., complete all as specified and directed.
9
-
-
M&L for preparing new steel surfaces exc 10cm girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
300
-
-
S&F mild steel work post,gate,railing & struts as in framed work including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets, including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
4450
-
-
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed or bedding with CM 1:6 ,etc complete all as spd.
Note:- (i) The rate of kota stone shall be deemed to incl for full rounded off corner/ edges incl holes for pipe all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and kota polishing to achive the desired granite finish all as specified.
60
-
-
M&L for coloured chequered cement concrete tiles 30 cmx 30cm x 25mm thick, set jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6 in floors with grey cement and pigments, complete all as specified and directed.
105
-
-
S&F 5 mm thick plain poly carbonate translucent sheeting fixed with self tapping screw incl dismantling complete all as specified and directed .
183
-
-
S&F welded steel wire of weight n. exc 4.00 Kgs/Sqm cut to length, bent to shape reqd and tying with and incl annealed mild steel wire not less than 0.9 mm dia (or) fixing with galavanised steel staples (or) welded to steel members etc., complete all as specified and directed.
315
-
-
M&L for 100mm thick PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base of floors complete all as specified and directed.
11.04
-
-
M&L for machine pressed precast concrete coloured interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.
25
-
-
M&L for fine sand, sand filling under floors or in foundation including watering & consolidation complete all as specified and directed.
3.75
-
-
M&L for black polished granite on shelves, columns, steps,windows cill,or on cooking platform 20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick cement screed bed in CM(1:6) complete all as specified and directed.
Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/ edges incl holes for pipe all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as specified.
8.5
-
-
M&L for cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1, smooth finished and reforming benching as required complete all as specified and directed.
1
-
-
M&L for PCC 1:2:4, type B-2, using 40mm graded crushed stone aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (incl caps and bases) etc., complete all as specified and directed.
8.5
-
-
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the othe other , or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut n exc 10 cm long dia of neck 5 to 10mm, complete all as specified and directed.
205
-
-
Demolition of cement concrete (un-reinforced) in ground floor and paving n. exc 15 cm thick bleow or above ground level complete all as specified and directed.
1.2
-
-
Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided, complete all as specified and directed.
0.24
-
-
Removing building materals etc., (other than spoil payable) to a distance out side of MOD land of 300m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination, complete all as specified and directed.
5
-
-
Taking down chawkhat or frame with (without taking of shutters from the frames) exc 1.50 sqm but n. exc 4sqm complete all as specified and directed.
1
-
-
Taking down chawkhat or frame with (without taking of shutters from the frames) n.exc 1.5 sqm complete all as specified and directed.
2
-
-
M&L for damp proof course to horizontal or vertical surfaces including necessary formwork 25mm thick in cement concrete 1:2:4, type B-0, complete all as directed and specified.
12
-
-
S&F box type steel window (Factory made) outer frame made out of ERW tube 'P' section 65 x 45 x 25mm and shutters of ERW tube 'P' section 50 x 35 x 20mm openable (double) glazed shutters on outer side with steel pintal hinges, steel handle 100 mm long, mild steel tower bolt 02 Nos for each shutter and 04 mm thich sheet glass complete all as specified and directed.
Note : The quoted rate against the above item shall also include :-
(i) For provn of one shop coat of zinc chromate primer on all exposed steel surfacesand one coat tar on the ends of steel frame in contact with bricks/stone surface.
(ii) 04 Nos MS Steel Lugs of 20 x 5. MS flat 20mm wide over all wended frames.
(iii) PCC block for embedding lugs.
(iv) 04 mm thich sheed glass for window with black film of thickness 80 micron sticked to glass panes as per instructions of manufacturer complete all as specified and directed
(v) 8mm square bar grill for window.
2.88
-
-
M&L for pressed steel frames for doors of size 125 x 60 mm with one or more rebated incl necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame for making arrangement for fixing of door spring etc. complete all as specified and directed.
7
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
0.5
-
-
S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conformingto Fe.290.Gde-E-165 (Brackets over 10 kg each to be measuredunder 'Structural Steel'), complete all as specified and directed.
30
-
-
Roughening surface of old concrete by picking,sweeping clean and washing down water to remove dust and brushing neat cement slurry with 3.0 kg of cement per sqm. complete all as specified and directed.
42
-
-
M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate 25mm thick as in floors complete all as specified and directed.
42
-
-
M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channel/ drains incl fair finises & necessary formwork complete all as specified and directed.
1.12
-
-
S&F mild steel plates, plain or chequered, 5mm thick or over in thickness Fe 410-W (Gde-E250) quaity-A in available sizes to frames complete all as specified and directed.
105
-
-
M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over a one coat of birla white putty 2mm thick on walls, complete all as specified and directed.
84.9
-
-
M&L for prepartion of newly plastered surface of wall applying two coat of weather proof anti fungal exterier emulsion paint on external surfaces including a coat of alkali resistant priming paint of any height and T&P required to complete the work complete all as specified and directed.
92.1
-
-
M&L for point wiring 1.5 Sqmm (nominal cross sectional area) with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed cable and including drawn through PVC casing-N-capping of 25X32mm size with all fittings and accessories, terminated to PVC board of suitable size for housing/ mounting the switches/ sockets including 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable earth wire connected to common earth dolly for one light point control by one, one way switch complete all as specified and directed.
41
-
-
All as per Srl item No 104.00 above but for one 3 pin socket outlet 5 Amp, on independent board complete all as specified and directed.
6
-
-
All as per Srl item No 104.00 above but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm size (FRLS-H), PVC insulated unsheathed multistranded copper conductor cable and with 2.5 Sqmm (FRLS-H), PVC insulated unsheathed multistranded copper conductor as earth wire, complete all as specified and directed
16
-
-
S & F switch piano flush single pole, one way 5 Amp ( ISI marked) complete all as specified and directed.
47
-
-
S & F switch piano flush single pole, one way 15 Amp ( ISI marked) complete all as specified and directed.
29
-
-
S&F socket 2 in 1, 3 pin 5/6 amps flush type complete all as specified and directed.
6
-
-
S & F socket 2 in 1, 5 pin 5 and 15 amps (ISI marked) flush type universal complete all as specified and directed.
29
-
-
S & F ceiling rose, 3 phase, PVC polycarbonate ,insulated body (ISI Marked) complete all as specified and directed.
34
-
-
M&L for lamp holder (Angle) PVC/ polycarbonate type with back plate suitable for batten fittings, incl LED 15watt, complete all as specified and directed.
2
-
-
S&F LED tube light with fixture, 1x 20 watt, (4 Feet) wall mounted LED battern, extrudedd PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and all fixing arrangements complete all as specified and directed.
25
-
-
S&F LED building securtiy light 25 watt fixed on wall suitable bracket with all connected accessories complete including electrical connection with copper cable from ceiling rose to fittings and all fixing arrangements complete all as specified and directed.
6
-
-
S&F LED tube light along with fixture, 1x 10 watt, (2 Feet) wall mounted LED battern, extrudedd PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and all fixing arrangements complete all as specified and directed.
3
-
-
S&F sheet metal enclosure MCB DB 4 way, SPN, double door, suitable for 240 V, 200 amps rated bus bar/ DIN rail, fixed and flushed on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed.
5
-
-
S&F MCB, SP (single pole) 06 to 32 Amps, 10 kA, B curve for inductive load connected through cable lugs of suitable size complete all as specified and directed.
14
-
-
S&F MCB, SPN (single pole and neutral ) 40 Amps for inductive load connected through cable lugs of suitable size complete all as specified and directed.
4
-
-
S&F exhaust fan, steel body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including fixing all arangements complete all as specified and directed.
4
-
-
S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.
1
-
-
S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and fixing arrangements complete all as specified and directed.
6
-
-
S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 Litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and fixing arrangements complete all as specified and directed.
4
-
-
M&L for cutting of existing GI tubing 40/50 mm dia for making new conncetion in position for insertion of new tees, branches, T and size Nipple suitable for 25mm dia GI pipe including excavation, returning filling & PCC complete all as directed and specified.
3
-
-
S&F medium grade galvanized pipe 25mm dia with all fitting laid in trenches complete all as specified and directed.
55
-
-
M&L for gun-metal, globe or gate valves 25mm, with iron wheel head, screwed both ends for iron pipe and fixed complete and all as specified and directed.
3
-
-
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out (including road cutting), complete all as specified and directed.
26
-
-
Supply and laying well burnt old size sub class 'B' bricks laid in trenches for cable protection, complete all as specified and directed.
0.32
-
-
M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6sqmm complete all as specified and directed.
60
-
-
S&F medium grade galvanized pipe 20 mm (3/4”) dia with all fitting laid in trenches complete all as specified and directed.
6
-
-
M&L for Gun-metal, globe or gate valves 20 mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
1
-
-
M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate slab flooring, bedded, and jointed in cement mortar 1:6 and pointed in cement mortar 1:3, complete all as specified and directed.
1
-
-
M&L for valve pits and constructing a brick masonary pits of internal dimensions 300mm x 300mm x 300 mm (bottom PCC floor of the pit should be minimum 30 cms below the bottom surface of sluice valve flange to provide sufficient working space) , bottom floor of the pit be constructed in PCC (1:3:6), 15 cms thick with 20 mm stone aggregate, inner and exposed surfaces and bottom floor of the pit should be plastered in CM (1:4) 15 MM thick. The sluice valve and other fittings should be housed in center of the pit. the vertices of the pit should in right angle and champhered. The top cover of the pit will be made out of MS sheet min 2mm thick witth angle iron frame made out of MS angle suitable size of inside pit with galvanised steel hindges two nos and locking arrangements duly painted with two coats of water resistant synthetic enamelled paint over one coat of red oxide, complete all as specified and directed.
1
-
-
M&L for name board with blue acrylic radium dheet for KSP with suitable sheet of size Approx 1.2 x 0.90 mtr rectangle shape with stainless steel frame work with pedestal dimension 2.5x1.2 mtr, 40 mm dia stainless steel rod including suitable size & shape of letter printed on both side as (Kerb side PUMP JUTOGH, SHIMLA) with necessary work PCC foundation, stainless pipe for hanging, etc including painting/ framing work, complete all as specified and directed. Note : (i) PCC, Frame work, embeddin work of above deemed to be inclusive rate.
(ii) Approval obtained from user
11.62
-
-
S&F sheet metal enclosure MCB DB 8 way, SPN, double door, suitable for 240 V, 200 amps rated bus bar/ DIN rail, fixed and flushed on walls including cutting Knitch and making good disturbed surfaces, complete all as specified and directed.
1
-
-
S&F MCB, SPN (single pole and neutral) 32 Amps for inductive load connected through cable lugs of suitable size, complete all as specified and directed.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%